There are several energy systems in the Swedish society and to ensure the comfort and health of the citizens it is of importance that the different energy systems are functioning properly. District heating is one of these energy systems and many household depend only on district heating to warm up their homes. District heating is dependent on several processes where every step needs to function in order to deliver the produced heat to the end consumer. Previous studies have investigated the distribution of district heating and how to make customers choose district heating as their heating method. The supply of fuel to the district heating plant has not been studied as much, even though it is an important part of the whole system. This thesis is a part of the project NORD-STAR (Nordic Strategic Adaption Research), which has focused on climate adaption in the Nordic countries.

A persistent problem in the construction industry is its low margins of profit. It is often difficult to earn money due to low efficiency and high costs. Logistics on the construction site answers for a large amount of these costs and it is therefore of interest to find new, more efficient logistic solutions. The purpose of this thesis is to compare two different logistic systems and further to evaluate which one that is the most efficient and profitable. A comparison is made between the traditional logistic systems used for years and a new logistic system developed by an industry association called BEAst.

This thesis, drawing from several empirical investigations, reaches the conclusion that there seems to be a positive correlation between the level of democracy and the level of state capacity in Latin American countries. This correlation is explained by a hypothesis derived from Rational Choice theory. With some important caveats, this conclusion is then applied to the discussion about democracy as a form of government. Within democracy, the thesis also offers an insight into different electoral systems and its possible implications, mostly on a theoretical level. The thesis only exists in swedish as of yet..

Idag arbetar avdelningen för extern produktion vid BAE Systems Hägglunds med produktions stödjande uppgifter för leverantörer av Build-to-Print komponenter. En allt större del av BAE Systems produkter konstrueras av BAE Systems konstruktörer medan tillverkning genomförs av leverantörer. Denna förändring har skapat ett behov för BAE Systems att kunna stödja leverantörer i produktionsprocessen för att förhindra att kvalitetproblem uppstår. Den produktionsstödjande uppgiften blir också viktig då det finns en vilja på BAE Systems att kunna genomföra kvalitetssäkring hos leverantörer innan ankomst. Dagens arbetsprocess för produktionsstöd har vuxit efter olika leverantörers tillfälliga behov vilket har gjort att inget standardiserat arbets- eller kommunikationssätt finns.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The main focus of this master?s thesis concerns the relation between subject representation, power and gender. Classification systems and subject heading lists are products of their cultural and social context and some subjects and disciplines are given a greater value than others. Our aim in this thesis is twofold; to discuss and critically analyse the prevailing gender norms that are expressed trough classification systems and subject heading lists and to examine how they manage to represent gender studies as a multidisciplinary subject in theory as well as in practice. We are also discussing the particular problems with the representation of multidisciplinary subjects in general.

As organizations are generating more business intelligence in their systems, more employees need access those systems. As a result some sort of permission management needs to be implemented to ensure the information remain safe. Access Control Matrix (ACM) is one way of managing permissions and is widely used among organizations. The issues that comes with ACM is that the matrix itself gets difficult to manage and overview as its complexity increases with the number of permissions. The study utilizes Action Design Research to develop a tool for visualizing permissions.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

In today's producing companies, there is a high demand on early integrated productdevelopment. One way to facilitate communication between departments and collaborationbetween people and thereby enable early sharing of product information within the companyis to use PLM, Product Lifecycle Management.The CAD environment at Scania is at the moment being upgraded from Catia v4 to Catiav5. In this stage it is important that also the interacting computer systems in Scania?s PLMenvironment are adjusted and in the future join the development. Scania has an idea of howthese systems will be developed as the transition from Catia v4 to Catia v5 is being carriedout.

ABSTRACT: Commercial swab transport systems are used for collection and transporting of fecal and other microbiological samples. This system must maintain viability and contribute to survival of microorganisms during transport to the laboratory. Four swab transport systems have been compared, eSwab, ?- Transwab and fecalSwab, all three with flocked swabs, and Copan Venturi Transystem with rayon swabs. The study followed the recommendations from the Clinical Laboratory Standard Institute; document M40-A for recovery of Samonella, Shigella, Yersinia and Neisseria gonorrhoeae after storage for 0, 6, 24, 48 and 72 h at room- (22-25°C) and refrigerated (2-8ºC) temperature.

This is a Master´s Thesis based on my own idea instead of that of a company. It is a survey that focuses on finding out more about which part of the development process that is blocking the establishment of electronic scorecards on the golf market. Why has it not been introduced on the market in a larger scale yet, considering the technology we possess today? This question is investigated through interviews with the Swedish Golf association, and three companies that have chosen different paths to implement an electronic scorecard. The interviews focuses on finding out what developers and the association believe to be the main problem, before taking the next step in releasing electronic scorecards on a larger scale.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

The complex, ever growing and changing environment, requires that today's organizations are dynamic and willing to change in order to stand competitive.This awareness has made change number one priority in almost all organizations' agenda.We live in a world that is constantly changing, yet many organizations fail to change successfully. When a change occurs in complex environments with multiple stakeholders, it immediately increases the complexity and the challenges of the change process.A complex situation may arise when, for example, partial outsourcing of the corporate information system infrastructure. Two of the most difficult challenges that organizations face today is to conduct a successful change process and managing the effect of a change, such as arising expectations. It is very common for change in an organization not to achieve the desired result or that they even fail. There may be a lot of reasons for these failures.