This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

The aim of this study is to investigate which management control mechanisms evolve in companies that receive funding from Venture Capital companies and why the management control systems evolve in the way that they do. A case study was performed on three Swedish high technology companies, that all received funding from Venture Capital companies for the first time in 2006. Merchant?s framework, defining all management control mechanisms as either, results control, action control or personnel control, was used to structure the study. Results show that the companies that received Venture Capital all increased the use of management control mechanisms within results control, action control and personnel control.

The world is changing and the business context is no exception. One of the clearest tendencies is a tougher business climate with harder competition due to increased international trade and the expansion of the e-business. At the same time the customers are becoming more sophisticated and demanding. The last decades have also meant that tougher and more frequent demands are being aimed at the businesses from a wider variety of stakeholders; demands regarding how environmental issues, social responsibilities and business ethics should be dealt with. All of the above have driven companies towards implementation of different management systems to be able to cope with the demands as well as to ensure that these issues are being dealt with in an efficient and effective manner.

This thesis is a study of spatial practice and literary depictions of homes in novels by Elsie Johansson, Kerstin Thorvall and Kristina Sandberg. The theoretical perspective is based on Henri Lefebvre´s view on social space, and on the concept of spatial practice. Research questions are: What homes are depicted? How does spatial practice function in the texts? How does the depictedspatial practice relate to norms and ideals?The novels, published 1993-2014, depict an interesting period in Swedish history (cirka 1920-1970) when politics and society at large was deeply involved in reshaping the homes and lives of Swedish citizens. The aim was to turn the citizens into new, healthy and rational parts of the new and rational society.

This is a graduation project in Innovation Management, which seeks to enlighten new theories within the major subject ? the multi?faceted innovation process.The reader is hereby invited to an insight in the more complex perspectives of these types of theories than what has previously been explained in simplified ways.We have conducted research on a company within the cleantech market; Cellkraft AB. The company develops and produces fuel cells amongst other products, which have emerged during their research and development in the fuel cell technology. Cellkraft works in a high?tech frontline market where innovation is key.

Today most ice rinks in Sweden use secondary refrigeration systems with a solution of calcium chloride and water as secondary refrigerant. Due to the large amount of energy such a system uses more efficient systems would be desired.An earlier study concluded in the possibilities of using carbon dioxide as secondary refrigerant with copper tubes as the loops in the ice rink. Since then 3 ice rink refrigeration systems has been built with carbon dioxide in copper tubes. Excluding the ones being direct involved in those projects there is still very little knowledge about how these system works. This study has been made primarily with the aim of adding to the knowledge concerning availability and cost and secondary to look at possibilities for improvement.A comparison between systems with carbon dioxide, calcium chloride respective ammonium solved in water has been made by using Decision Matrix.

The ÅF Group is a leader in technical consulting, with expertise founded on more than a century of experience. They offer highly qualified services and solutions for industrial processes, infrastructure projects and the development of products and IT systems. They are also one of the leading names in certified third-party testing and inspection work.Today the ÅF Group has approximately 4,000 employees. Their base is in Europe, but their business and clients are found all over the world.A part of ÅF-Engineerings business is programming different automation systems to clients. Another part is support in both telephone and personal visits.Because the number of clients is high and the flora of different automation systems is big the consequence is that the employees must have access to many licenses with programming tools.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

The thesis demonstrates protection solutions that can be suitable for a camp during internationalmissions in order to resist complex threats. The threats could consist of small arms, machineguns,RPG 7, anti armour missiles, mortar, artillery, HPM-weapons, car bombs, biological and chemicalweapons as well as sabotage and theft. It?s not the technology itself that makes the threat scenariocomplex it?s the way the opponent acts during the operations. The opponent acts usually incivilian clothes and therefore he is difficult to distinguish from other civilians.

Mathematical models possible to simulate are of great importance in order to make successful projects in the aircraft manufacturing industry. An aircraft fuel system is very complex, containing pipes, tanks, orifices, valves and pumps. The principal of this thesis is using the tool Easy5, which no longer is considered reliable enough in terms of development and support. This thesis tries to evaluate the Modelica language as a possible alternative to Easy5. To make this evaluation, the components concerned in the fuel library in Easy5 are implemented to the Modelica language.

Sweden is considered to have one of the world's highest animal welfare standards in agriculture. Despite this, there are shortcomings in animal husbandry. One example is overcrowding, which is a way to increase stock size without making costly investments in the buildings. It can be carried out systematically to increase profitability or due to, for example uneven calving during the year. The European Commission criticizes the fact that stocking density is not controlled under Swedish welfare inspections.

This master thesis examines the development of the two earlier independent IR protocols Z39.50 and SR (Search and Retrieve, ISO 10162/10163), now Z39.50/SR, from the beginning of the 80s to 1996 and their functionality in the client/server environment.Z39.50 applications in library systems will allow easy access to information regardless of platform or location. The use of Z39.50 will create a new user environment. Almost all the library systems of the market support the Z39.50 and surprisingly the use of it in Sweden lied on a very low leve! in 1996. This thesis was followed-up by an interview and a questioner among the Swedish Z39.50 users. They could see a huge potential of development concerning the future IR process.

The background to this thesis is the impact of information technology on libraries and librarywork. If information technology causes changes in the tasks and work of libraries, thenlibrary organisations should also change. It is important to engage and inform the staff if suchchanges are to succeed. This thesis investigates the notions about library tasks and librarywork among eight "middle-managers" at Linkopings universitetsbibliotek.The investigation is based on interviews and then analysed with Soft Systems Methodology(SSM). By identifying the "Weltanschauung" of the staff, the thesis tries to create logicallydesirable and culturally feasible models of systems relevant to the situation at Linkopingsuniversitetsbibliotek.