ERP system is the information technology that has had the biggest impact in companies? development and way of working in today?s world. ERP system is divided in several applications with a modular software design that allow people in every department in a company to store and retrieve information accurately and in real-time. This master thesis investigates attitudes toward ERP systems among business organisations and ERP suppliers with the overall purpose of analysing to which extent a new ERP system will bring change in the business process. The purpose of this thesis is to make a survey of attitudes toward ERP systems among business organisations and ERP suppliers.

As an amateur it can be difficult filming from several angles at the same time as this requires several cameras. It´s also hard to film at occasions when it´s not appropriate to manoeuvre the camera manually. Systems for solving these problems already exist, but it´s either more expensive, professionalsystems or cheaper systems with limited functionality.The purpose of this project is to develop a cost efficient solution to the problem above that offers a better functionality then existing commercial systems. The biggest difference from existing products is the wireless video feedback from the camera to the remote unit.The result of the project is a system consisting of two units, a manoeuvre unit with a cradle for the video camera and a remote unit from which the operator can control pan and tilt of the video camera.Communication between the two units is wireless.On the remote unit there is a joystick and a display mounted. In addition to this, there is also an IR receiver that is capable of reading the signal from the cameras own remote and sending it to the manoeuvre unit.The manoeuvre unit is equipped with one motor to control the tilt function and one motor to control the pan.

Efficient numerical methods for option pricing is an active field of research. This project has the goal to examine possible ways to improve an established method of numerical pricing. The method is based on an adaptive finite difference method in price and uses the backwards differentiation formula of order 2, BDF2, in time. The project will focus on improvements to the time integration through implementation of discontinuous Galerkin methods, dG. Empirical convergence and accuracy results are obtained for equidistant dG-methods up to order 3 and performance is compared to BDF2.

Information på webben konsumeras idag via en mängd heterogena enheter. Faktorer som nätverksunderlag och skärmupplösning påverkar vilken bild som är lämplig att leverera till klienten, då en bild i sitt originaltillstånd på en tekniskt begränsad enhet tar lång tid att hämta samt kräver en stor datamängd. Eftersom surfandet på mobila enheter via mobila nätverk förväntas att öka är en lösning för adaptiv bildladdning relevant. Syftet är att undersöka huruvida en webbtjänst, bestående av en klient och en server, kan avgöra bäst lämpad bildkvalitet att leverera till klienten, baserat på dennes aktuella nätverksprestanda och skärmupplösning. En enhet med lägre skärmupplösning och ett långsammare nätverk berättigar en bild i sämre kvalitet och lägre bildupplösning.

Problem: Our opinion is that it is important to consider about usability in system development. In this thesis we will focus on usability in point-of-sale systems. The point-of-sale system we base this thesis on is Extenda Retail. Our case study is performed on Ica Kvantum in Bromölla, which implemented Extenda Retail about two years ago. Purpose: The purpose of this thesis is to figure out what important factors there are to consider, in usability aspects, when developing point-of-sale systems, with focus on the cashier.

This essay is about Late Iron Age settlement and its production. I want to define the nature ofthree different workplaces on Bornholm, Denmark, and compare them. My aim is to see if itis possible to define a workplace through the traces of the craftsmanship. Several materials areselected in this essay and the analysis provides different perspective on workplaces in the LateIron Age in Scandinavia. The results of the analysis between the three workplacesAgerbygård, Baggård and Kanonhøj shows that Baggård have more traces of melting of bronsthan any other of the places.

Scania Top Team is a competition where the best mechanics in the world are competing against each other. In 2011, the world final was recorded and this material is now used to see which problem solving strategies these top of the line teams are using to solve the realistic problems assembled in front of them. To help them, the mechanics are allowed to use two of Scanias IT-systems: Scania Multi and Scania Diagnose and Programmer 3. This report consists of two parts. The first part is the development of a method to analyze the recorded material.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

This thesis studies the concept of balance in the management control systems (MCS) of a small Swedish company within the IT-sector. The aim is to evaluate the importance of balance and dynamics in MCS and investigate which factors affect them. The frameworks used are Simons (1994) four levers of control, and the five-factor model for balance and dynamics by Mundy (2010). The small IT company - the object of the case study - has grown extensively in the last years and needs to develop more formal MCS without losing efficiency and creativity in their fast-moving industry. The case study reveals that balancing MCS is important also in smaller companies with less formal MCS.

The mainpart of this thesis is about the developing of a new analysis tool to be used in Zenicor Medical Systems AB ECG-system. The primary task of the system is to simplify the ECG survey for patients who suffers from different kinds of arrythmias, for example heart fibrillation. With this system is it possible for the patients to do their ECG survey by them self at home and then send the signal with their telephone or mobilphone to a server. The equipment used to do the survey is not bigger than you can have it in a pocket and this results in a bigger flexibility for the patient. A doctor can connect to the server and analys the ECG-curve and follow up the patients condition..

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

Today significant resources are provided to improve the digital work environment within the Swedish healthcare to create efficiency, good work environment and patient safety. Despite this, major flaws are shown by the lack of communication between the eHealthcare systems. This becomes a stress factor among healthcare professionals because of increased administration and decreased physical contact with patients. The purpose of this study is to create a understanding of the concept of interoperability at different levels in the eHealthcare systems. This has been conducted through a qualitative interview study at a healthcare center where the respondents have been describing their digital work environment and the way it works today.

Problem: Our opinion is that it is important to consider about usability in system development. In this thesis we will focus on usability in point-of-sale systems. The point-of-sale system we base this thesis on is Extenda Retail. Our case study is performed on Ica Kvantum in Bromölla, which implemented Extenda Retail about two years ago. Purpose: The purpose of this thesis is to figure out what important factors there are to consider, in usability aspects, when developing point-of-sale systems, with focus on the cashier. We also wish to find out the cashiers opinions about the Extenda Retail system. Method: The information gathered for this thesis consists of literature and interviews.

This thesis explores how remote work impacts organizational culture and identifies leadership strategies that can preserve and strengthen the culture in a remote work environment. By employing a theoretical framework related to organizational culture, remote work, and strategies, along with a methodology based on qualitative interviews, the study aims to fulfill its specified purpose. Theories such as Schein?s three levels of culture and McKinsey?s 7S Framework are applied to understand and analyze the collected empirical data. The empirical data, presented through four themes, is based on respondents? experiences and opinions regarding remote work can lead to reduced social interaction and sense of belonging, but strategic digital initiatives and adaptive leadership can help maintain organizational culture despite the lack of physical presence.

The objective of this study was to make an inventory and a potential analysis of the organic beef production in the region of Gävleborg, Sweden. A survey was conducted, where a questionaire was sent to all farmers in the region who had environmental subsidies concerning organic cropping systems in 2001. In total, there were 701 farmers, of which 46 % participated in the study. Three slaughter houses were interviewed to get their pictures of the development of organic beef production. The study shows that there are potentials and interests in the region to increase the production of organic beef.