
Sökresultat:
1261 Uppsatser om Complete Vocal Technique - Sida 64 av 85
Att öppna texten för det främmande : en studie av litteraturens gränser och möjligheter vid gestaltningen av det främmande och annorlunda, den andre och av lidande.
The aim of this study is to examine ways of writing experiences of the strange and different, experiences of the other in his or her otherness and experiences of suffering. The study focuses possibilities and limits for the writing of these experiences and aims at finding a tangible way of writing literature. Part of the aim of this study is to elaborate a proposal for a way of writing experiences of the strange and different, experiences of the other in his or her otherness and experiences of suffering. The material for the study consists of three different approaches to literature, in which theories on literature or analyses of literary works are presented. This material is initially analysed in separate analyses in which conceptions, strategies and methods for writing experiences of the strange and different, the other and suffering are identified. Secondly, the material is analysed in a comparative analysis, aimed at finding similarities and differences between the approaches but above all to let the approaches supplement and challenge each other.
Studie av miljökonsekvensbeskrivingar till detaljplan : En jämförande analys av fyra MKB
When the local authorities establish a plan for land use planning, they have to judge if the influence on the environment could be of such a grade that they have to make a special Environmental Impact Assessment (EIA), following national laws and EU-directives. The laws for the process in Sweden is set by the Swedish Parliament, with advisory given by the central government authority, the National Board of Housing, Building and Planning, Boverket. For EU, the laws is set by the European Parliament and the Council. The laws and directions for this process have been changed for Sweden in recent years, and the aim of this study was to compare the contents of three different Environmental Impact Assess¬ments to see if there has been any change in appearances and content in later years, as well as to see if different municipalities and authors have effect on the EIAs. According to different studies some of the EIA done are without insufficient focus on main environmental issues in the EIA, or even that some information is missing.
Fallstudie av produktionschefers ledarskap
The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.
Sociala mediers betydelse på dagens marknader : Företags vilja att förstå sina kunder
Title: The role of social media on today?s markets ? Companies? desire to understand theircustomersAuthors: Kristoffer Avci-Nåmark & Patrik WidlundBackground: The markets of today are characterized by dynamic conditions because of thecontinuous change in consumer preference. Due to this, the interaction between the company and its consumers is gaining importance as companies find the need to increase their knowledge about the market. Out of this need social media has emerged as a tool forcompanies to improve their communication with customers. The popularity of social media isincreasing at a rapid rate and sites such as Facebook now has around 500 million usersworldwide.
Ternära koder för variabelt felskydd
Ternary codes for unequal error protection is a part of a communication system where different parts of the information to be transmitted can receive different amount of error protection. There are a lot of applications where the channel conditions fluctuate so that reliable or acceptable communication can not be guaranteed. Regardless whether the fluctuations of the channel are intentional or not the idea is to let the coderate decrease so that the error correcting capability can increase for the part of the information to be more protected. By using the support, the nonzero positions of the ternary code, a new binary code can be extracted with properties different from the ternary code in the sense of cardinality and minimum Hamming distance. When the channel conditions are good the receiver decodes the message using ternary decisions and receives all information included in the codeword.
Hur kan jag veta det när det inte står i texten? : Läsförståelse bland gymnasieelever med neuropsykiatriska funktionsnedsättningar
Studies show that some pupils with ASD (autism spectrum disorder) can have difficulties in understanding written texts. The present study seeks to examine whether pupils with ASD differ in their reading comprehension of a factual text and a literary text. Another aim of the study is to obtain a picture of the reading habits of high school pupils with ASD, what reading strategies they use, and how they work with texts in Swedish lessons in school.The study uses texts from PISA surveys from 2009 and 2000. The factual text Varmluftsballongen (The Hot-air Balloon) was taken from the try-out for the 2009 survey and the literary text Gåvan (The Gift) was taken from the 2000 PISA survey. To gain some idea of the pupils? reading comprehension of the texts, the present study used the tasks accompanying the texts, with certain changes in the questions about the text on the hot-air balloon.
Bakom Spegeln : En essä om tvivlet eller det goda beslutet i en filmproduktion
The essay depicts the opposite views of the director and an actor during the filming of a specific scene in a feature film. The actor feels that he is not being listened to. This leads to unforeseen consequences for the director, as the actor no longer wishes to take part in the marketing of the film prior to its opening night. Everything is seen from the director?s point of view, she is working in a film world dominated by men.Questions are being asked if the director?s instructions are clear enough or if the actor, fearing getting lost, is mixing up his own feelings with those of the character he is portraying? What happens to the collaboration and how does it affect the rest of the team and the completion of the production? The director is also the producer.
Productivity of integrated harvesting of pulpwood and energy wood in first commercial thinnings
The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.
Utveckling av arbetsmetod för DFA
Scania is among the leading companies in the heavy vehicle industry. Scania also assemble engines for their trucks and buses, as well as to external marine and industrial applications. Wrongly assembled parts leads to quality problems, which makes it important to secure that the assembly is correct. To do this Design For Assembly (DFA) is used to describe how parts should become easier to assemble. Scania?s production unit for engine assembly has had a working method for DFA in the shape of a checklist, which is not used.
The Toyota Production System (TPS) : ett verktyg för att skapa effektiv och lönsam produktion
Many companies are currently working to optimize and streamline their processes and production lines to achieve higher profitability. In increasingly competitive markets, companies are working to find solutions to increase the value of their production with such a small use of resources as possible.
A tool used to accomplish this is the Lean management system. Lean comes from the production system that Toyota has been developing since the early 1900's, The Toyota Production System (TPS). The Lean philosophy helps companies, by working towards continuous improvement in its operations, to achieve higher customer satisfaction, more efficient production and ultimately higher profitability.
Many companies are working to implement Lean in their organization. But there are many who fail to implement a complete change towards Lean.
En komparativ studie av vinstdelningssystem bland advokatbyråer
Law firms are defined as knowledge-intensive companies. Due to the dependency regarding the resource of knowledge among the firms employees and to the fact that they often are categorised as a type of professional service firm. The purpose of this study is to investigate the different types of profitsharingsystems as a form of reward with focus on the theoretical differences and effects of the True Partnershipmodel and the Stockholmmodel. In addition to these models we will look into the Human Resource processes of; recruiting, integration, retaining and development of employees. The main purpose of the study is to examine the theoretical level on how the profitsharingsystems effect different Human Resource processes and through the knowledge of these connections using this as an analogy when to analyse other law-firms and knowledge?intensive company?s.
Undernäring hos äldre- ett gemensamt ansvar : Sjuksköterskans erfarenheter av team-samverkan kring den äldre patientens nutritionsbehov inom äldreboende
Purpose: The purpose of this interview study was to describe the nurses? view of their experiences of interaction with other professionals to improve the elderly patient's nutritional status in municipal elderly care.Method: The study is based on qualitative interviews with nine nurses and was analyzed according to a qualitative content analysis method.Results: The main themes that emerged: Communication among the involved, To feel secure in their role, Lack of structure. The nurses worked closely with nursing staff and cooperated more with doctors about nutrition than with the physiotherapist and occupational therapist. The nurses felt they had the main responsibility for maintaining a good nutritional status of the elderly patient and described themselves as primarily responsible for nutrition while they lacked nutritional competence equal to the responsibilities they had during the whole nutrition process. The nurses had no community dietitian?s skills and felt that the dietitian had a great responsibility and the most updated knowledge in diet and nutrition.
Förrotation till omrörare
The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.
Content marketing - Implementeringen av den moderna säljtratten och relaterad strategi
The global spread of the Internet has enabled busniesses and consumers in all industries to be better informed. Consequently, the buying process has appeared to become different from what tratditional models implies. As the buying behaviour among customers is evolving, selling companies are responding to this change. This thesis evolves around the consequences that the developing relationship between buyer and seller in business-to-business companies has led to. The topic in focus is the buzzword and phenomena "content marketing" with its marketing and selling strategy.
Definition av stötdämpares fyllnadsgrad
Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..