An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

Earlier studies of musculoskeletal problems with milkers working in milking parlour operators have shown that it is a physically demanding occupation. The extremities that are most exposed are neck, shoulders, hands and wrists. Those systems that have been studied in present cases are fishbone and some tandem barns. There have been changes in the working environment during the past ten years. The mechanisation has been developed for the better with automatically removers of the milking units and vertically adjustable floors in almost every daily milking barn. In other hand the milk production are more industrialised and more related to stress today.

SammanfattningDenna rapport syftar till att redovisa kandidatarbetet för spåret industriell design, där målet var att utforma en mobil läslampa med lysdiodsteknik. Målgruppen för läslampan var främst studenter och resande som kan tänkas vara i behov av att läsa på platser med lite eller otillräckligt ljus. Arbetets fokus har varit att utforma ett fullständigt koncept med integrerade lösningar för strömförsörjning, kylning och en behaglig ljusmiljö.Det största problemområdet var att utforma en tunn armatur som samtidigt fungerade som en värmeledande kylfläns. För att lösa detta utfördes först beräkningar analytiskt och sedan numeriskt med hjälp av datorprogrammet ANSYS och redovisas som en separat del i rapporten. En tredimensionell modell utformades i Solid Edge och renderingar av slutkonceptet utfördes i KeyShot.Resultatet av arbetet blev en länkarmsbaserad hopfällbar läslampa i kompakt format.

As the environmental requirements on businesses increase from various stakeholders, the incentives for businesses to work more with environmental issues also increase. Historically, the requirements were focusing on companies with direct emissions from operations. Lately, the environmental impacts that occur indirectly as results of corporate activities have become more topical. Companies and organizations that mainly offer services often have a greater indirect than direct environmental impact. This is because they are affecting third parties, which in turn have a direct environmental impact.

The main purpose of this Master?s thesis is to explore university librarians? thoughts about the future. The analytical focus is thus on the librarians? representations of the future. The theoretical framework used is narrative theory with a social constructionist viewpoint.

There are several competing views on how to best utilize air power. Following his quantitative study of air power, Robert Pape developed a theory which focuses on undermining the target state's military strategy. According to Pape it is possible to explain the outcome as a result of military vulnerability. This essay seeks to determine if Pape's theory can predict the outcome of Operation Unified Protector. By using a mixed methods approach on four hypotheses, it will be determined if the operation was a successful case of coercion, if NATO acted according to Pape's model and whether this achieved the desired effects or not. The results reveal that the theory could not successfully predict the outcome of the conflict.

Work Environment problems on construction work sites are very extensive and discussed. The construction industry is one of the most dangerous industries in Sweden. The construction industry occupies about 290 000 employment (2009), and the investment was 250 billion SEK. This report will investigate the issues of the work environment and offer advice on how these can be measured and imporved. The study includes review and analyses of occupational injury statistics, interviews, inspections and audit and review of the literature.

This essay is a discourse and a feminist theoretical analysis that focuses on the alternative discourse that we consider Feminist Initiative to be constitutive of. Our theoretical stance, with base in Laclau and Mouffes discourse theory, builds on the notion that reality is characterised by conflicts between different competing discursive formations and that the social is an endless struggle over the preferential right of interpretation of meaning. More specifically, the essay focuses on the discursive struggle over the meaning of the term politics. It is our understanding that the dominant perception of politics necessarily excludes other understandings, which can according to Eduards, be explained as a consequence of a patriarchal distribution of power that renders the subordination of certain understandings of politics accordingly. Feminist Initiative, as an alternative discourse, can therefore be perceived as a threat to the dominating discourse of politics, which in order to maintain its preferential right of interpretation seek to illegitimatise and depoliticise the politics that the alternative discourse represents.

The purpose of this master thesis is to investigate the understanding of children's librari-ans regarding children's needs and preconditions in a library context and based on devel-opmental psychology and information seeking theories. The children's perspective is said to be the guiding star in the children's library and the thesis also aims to study the chil-dren's perspective as defined by children's librarians.The master thesis is a qualitative study based on interviews with children's librarians working at major public libraries. Observations of the children's libraries in the study have to some extent been performed.The study reveals that children's librarians are fairly knowledgeable about children but do not to a full extent use that knowledge into adapting the library to children and their needs. The children are not contributing to the adaptation of the library to any extent as there are few routines for that matter. In society in general children are on a regular basis represented by adults and their perspective on children and children's needs, which may differ from the perspective children have on their own lives, and the same is applicable for the children's library.

The purpose of this essay was to describe and analyse the tension/conflict between external demands and actual conditions, as experienced (and told in interviews) by employees at two social insurance offices in Scania, concerning their roles in the process of working life rehabilitation. The theoretical starting point is the theory of street-level bureaucrats, as defined by Lipsky. The comprehension among the employees were that working life rehabilitation services are approved less today compared to a few years ago. The discretion, i.e. the position to choose among competing alternatives; about what to do, how to do it etc., characteristic of street-level bureaucrats, according to the employees is less prominent, as the routines of handling cases and decision making are regulated.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

The focus of this essay is Swedish bilateral development aid. With the help of organization theory I analyse the development aid strategies and policies of the 1990s, in order to examine how and why they were introduced. I investigate three different types of aid organization, namely structural adjustment programmes, political conditionality tied to aid co-operation, and equality policy as part of development co-operation. I analyze the introduction and subsequent use of these three co-operation forms to see whether they were applied and adopted into Swedish development aid because more efficient measures were required or because they were the most recent and modern ways of dealing with development co-operation.Organization theory presents these two ways of analyzing organization. They are occasionally competing and sometimes complementing each other in explaining organization.

Nature?s Best is a quality-label for Swedish Eco-tourism. It is one of very few active ecotourism labels and the only one that claims quality as its main focus. The objective of this thesis is to evaluate the certification scheme Nature?s Best with regards to the values the certification creates for the companies that certify their products.

A discussion regarding the alignment and measuring procedure of propeller shafts has arose due to the competing situation in the industry, and higher standards from the customers. An estimation of the deflection of shafts in different alignment situations has been made with help of FEM-analysis and beam theory. This has been analyzed and compared with the experience from Rolls-Royce AB suppliers of shafts. An evaluation of measuring protocols has been made and the result indicates that there is a correlation between the deflection of the shaft and the run out. Results from a measuring test performed by Balino, Spain, verifies this conclusion.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.