This is a diploma thesis executed as a part of the examination of the educationalprogram Building engineer ? Construction management at Halmstad University. The aim of the thesis is to compare and evaluate conventional open-cut pipe-laying withhorizontal directional drilling. The thesis includes a comparison of the economic,environmental and time-based aspects of both methods and discusses which factorsthat determine the optimal choice of method.The study is mainly based on previous studies regarding the subject and oninterviews with professionals from the industry.A fictional project with five realistic cases of pipe-laying scenarios was compiled,sent to different companies for calculation, evaluated and compared. Our conclusionregarding when it?s suitable to use which method is entirely dependent on thespecific project.

AbstractThis essay contains a comparison between principals and supervisors within the Health-care and is focused on their view regarding their own leadership. It contains a comparison between their respective models for leadership and how to evolve as a leader within these two organizations.The study is carried out as in dept interviews with four principals and four supervisors.The results show that the principals have a sufficient education and a broad network, but they need the opportunity to a personal development within their leadership. On the other hand, within the Health-care, the supervisors stand on a good base of education where focus lies on the personal development within the leadership. However, they need more opportunities to build up their networks.The conclusion that can be drawn is that these two organisations would gain on learning from each other, in order to establish as good conditions as possible to improve the leaderships within their own organization..

The case method is a relatively new pedagogical method in Sweden that is based on students exercising their skills in the analysis of complex situations and problems that are based in reality and that help students to see a broader perspective and context.The purpose of this study has been to investigate, through interviews with students and teachers, the advantages and disadvantages of the case method in teaching geography.The results of the study show that both teachers and students share almost the same opinion. The conclusion is that the case method is a didactic method that is well suited for teaching geography, as it is based on reality and develops the students? ability to analyze, argue and find solutions in several areas within the subject of geography. If a student is strong in these skill areas they can really benefit from the application of the case method in the teaching of geography, but for students who are weaker in these skills, the case method can be a disadvantage.

My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.

Which expectations did leading debaters place on fiction as an instrument in achieving societal changes hoped for by introducing the Public library? How can the value of fiction be described in relation to the mission of the Public library, according to these moulders of public opinion? Place and timeframe for this thesis is Sweden around the years 1905-1912 (period of formation of the Public library here according to the Anglo-American model). Starting point is the assumption that the Public library as a political institution is characterized by an ideological function. It produces meaning and norms, it sets standards of value. Method used is based on close reading and comparison.

Escherichia (E) coli is one of the most common udder pathogens associated with acute clinical mastitis in Swedish dairy cows. The aim of this study is to review some of the existing literature on E coli mastitis from a Swedish perspective. The bacteria, its most important characteristics, and diagnostics under field conditions is covered, as well as what happens during infection, how E coli affects the cow and which consequences this have. Clinical symptoms associated with E coli mastitis are described and information on when these cases of mastitis usually occurs is given. Risk factors in the cow?s enviroment are described as well as the importance of the cow?s immune defence.

Small scale internal consumer tests provide a company with a cheap way to get valuable information regarding their products advantages and flaws. Therefore the demand for possibilities to do this kind of test has increased. This report is part of a new sensory project at Unilever. It presents a method for sensory comparison of the company?s own products with the corresponding competitor products.

At the beginning of 2011, Sweden started using the European rules for structural design, the Eurocodes, instead of the previous national rules. In both the previous rules and the Eurocodes, it is possible to dimension concrete columns using tabled values. However, the required cross section measurements have increased considerably. Moreover, it is possible to dimension concrete columns using calculations, however, this is unusual.The development of a fire in a fire cell can be divided into the growth stage, the fully developed fire and the cooling phase. The duration of each phase, as well as the temperature, is dependent on a number of factors, e.g.

There are widespread discussions about the use of retouched models in media, ranging from bloggers to legal decision-makers. Research shows that there are negative psychological effects on especially females being exposed to idealized, retouched model images. The purpose of this paper is to explore the effects of using retouched models in advertising from a marketing perspective, based on attitudes, perceived quality and purchase intentions.Based on theories about attractiveness, halo-effects and social comparison, an experimental study was done, investigating the different responses on above mentioned parameters to advertisements showing either retouched model images or non-retouched model images. Initially it was also tested if the retouched models were seen as more attractive than the non-retouched models. The results showed almost no differences between the reactions to the advertisements with retouched models compared to the advertisements with non-retouched models, when all respondent groups were analyzed together.

This thesis presents the question of a possible breakthrough for mobile payment solutions in Sweden. The way payments are made and the way cash is being used in the society is changing. To be accepted as an alternative method, if cash isn't king anymore, the new technology will have to acquire user acceptance. In this thesis a case study of Swish, a mobile payment solution for P2P-payments, is presented. The focus of the study is customer value and technology acceptance of the service.

The purpose of this study was to explore students' and teachers' experiences of the new pedagogical teaching tool, interactive whiteboard, which have gained increased popularity and wide spread usage in the classrooms. An observation during a mathematical lecture was conducted as a pilot study prior to the main research method of phenomenology; based on students? self-descriptions and interviews with two teachers, this methodological approach was used to investigate the subject matter. The interpretation, comparison and analysis of the results surrounding this new teaching method is explained by two theories, constructivism and socio-cultural perspective. The information shared by the students and teachers have been broken down into four categories: enjoyment & interest, practical, insight and no different.

The purpose to this study is to find an understanding of the effects of how sponsorship can affect companies and their business and at the same time get a better understanding of how sponsorship is or can be used as a marketing tool in today?s marketing. By using a quality research method we have chosen to use a half structured research method to make it possible to find out how sponsorship as a marketing tool can be used from a company perspective in relation to our chosen thesis. To enhance the readers understanding we describe the base of sponsorship and principals for sponsorship, after that describes a deeper perspective of sponsorship, what sponsorship is, and what factors are needed to be taken into consideration. Further on we illustrate the figure that later on will constitute the analysis with attributes like: association, exposure, relations and integrated communication.

The construction industries are relatively conservative type of business that takes a longtime to adjust for new methods and embrace new ideas. It dose not matter if the newmethod seems to be an improved method as long as it is new and untried. Constructioncompanies are reluctant to change form a longtime working method to a relativelyunknown method.The purpose with our report is to perform an evaluation of BeWi construction method.Our goal are to present the generally opinion about BeWi from the contractors that hasbeen in contact/worked with the method. We also want to know from the contractor?spoint of view if BeWi and the method measure up to the standards that are presented byBeWi and if they believe that improvements need to be done.Our progress up to the final report has consisted of three parts[1]Field studies[2]Interviews[3]Literary studiesWe started out with field studies where we took notes and observed all the includedworking phases on the construction site when using the BeWi method.

This master thesis has been carried out at Scania R&D at the department of Powertrain Control System Development during the winter 2011/2012. The purpose of the thesis was to produce a method that with the result of troubles codes from the field testing would be able to say something about the maturation of a component, in this case the VGT, variable geometry turbocharger. To start with, it was necessary to investigate hich information was available. After the information been summed up in tables and charts, this so that it was possible to understand the huge amount of data, the calculations started.Since the thesis was about maturation of a component the proportions were calculated of components that had a trouble code in contrast of those who passed the test without a trouble code. This Thesis includes background information about basic of statistics and about the company Scania and its testing process.

The purpose of this thesis has been to determine experimentally how good a peltierelement is to convert waste heat from wood burning. Three different peltier elementswere used in a comparison study. The comparison was mainly done to know howmuch power could be obtained from each element. Even, a circuit with a step-upfunction has been created to give a higher output voltage than the peltier elementitself. The result of the experiments was a low output power, the highest valuereached 2.18W.