In 2009 transgendered persons were included in the Swedish law against discrimination. Prior to the inclusion a commission made an investigation of the necessity of such change in the law and how it could be designed. This essay focuses on the discourses regarding gender that appear in the law and the report written by the commission. Using theories by Judith Butler and discourse analysis inspired by Norman Fairclough it identifies two main discourses regarding gender: a two gender discourse and a queer discourse. The two discourses meet in the studied material in an antagonistic way, a conflict that is solved by separating the two and making one part of the law focus on gender and one on transgender.

The market is developing and a growing competition increases pressure on companies to maintain their competitive advantage. Working with cost savings is a way to enhance earnings in a short term but also in a longer perspective. Volvo Powertrain Production Köping has an overall goal; to reduce costs by nine percentages in three years. To achieve the goal, Volvo Powertrain Production Köping works with World Class Manufacturing where the Department of Processing Technology constitutes an important part.Volvo Powertrain Production Köping lacks a standard for how savings within the metal cutting tool area are to be calculated. This makes it difficult to control and monitor their business outcome but it also causes difficulties in controlling the tool suppliers? outcome.

Variations in fertility have caused a problematic situation in Sweden among other European countries. According to the Council of Europe we are facing an economic and demographic challenge, when the baby boomers of the 1940?s are retiring. Economists have for a long time studied the connection between economic factors and fertility, and several studies have found a correlation between business cycles and birth rates. This connection is again of current interest 2008, when a financial bubble bursts at the same time as a baby boom occurs.

Syftet med studien är att beskriva hur svenska multinationella företag tillämpar cost plus metoden vid interna transaktioner över landsgränser. Vidare har följande forsningsfrågor formuleras: Hur tillämpar företag cost plus metoden? Vilka faktorer påverkar internprissättningsprocessen? Fallstudien är genomförd på Älvsbyhus som är en av nordens största tillverkare av prefabricerade sektionshus av trä med affärsidén att sälja och tillverka färdigmonterade, källarlösa trähus i 1 eller 1,5 plan till marknadens lägsta pris. Den utbredda handeln mellan företag i olika länder har resulterat i ett ökat antal multinationella koncerner bildats, därmed har ett behov av internpissättning för värdering av interna transaktionerna uppstått. Huvudtanken med internprissättningen är att internpriset ska avspegla marknadspriset för varan eller tjänsten, vilket ofta inte är möjligt då ett marknadspris inte existerar.

Due to the well-developed rhetoric and the relative easiness to estimate costs, cost considerations are usually more in-depth than revenue considerations when discussing strategies impact on profitability. To avoid dysfunctional companies and poorly judged strategy decisions it is necessary to develop the rhetoric of revenue considerations.By collecting data from 230 respondents in a quantitative study of two grocery stores in Mora, the study aimed to assess the relationship between choice of generic strategy and self-reported buying behavior, considering differing decision-making processes of customers.The results of the study indicate that a differentiation strategy performs better than a low-cost strategy in terms of buyer frequency, number of goods and cost of purchase. However, due to a poor data collection method, the results are weak, and should therefore be questioned. The study indicates that reliability considerations for behavioral measures should be treated in the same respect as psychological measures, and therefore illuminates the need for new methods and measures to be developed..

The purpose of this paper is to carry out a domain analysis of Section for Maps and Pictures at Uppsala University?s Library and investigate its business, collection and knowledge organization. Birger Hjørland?s socio-epistemological domain analytic paradigm is applied. As methods, Hjørland suggests eleven approaches, and from them he emphasizes especially the importance of the historical and epistemological approaches.In this paper three questions are analysed.

This study has been carried out in the spring of 2014 on behalf of PQR Consult AB in Stockholm. The aim of the study has been to analyse the energy usage of the building Skarpövägen 1 in order to explore the possibilites of saving energy by using appropriate equipment. These possible solutions have been simulated by using the programe IDA Indoor Climate and Energy, combined with a life cycle cost analysis. The laundry building, Skarövägen 23, has also been analysed due to its high amount of energy usage. The result of the energy analysis showed that the energy usage was much higher than the energy declaration.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

Vattenfall district Heating power plant in Uppsala produces district cooling with absorption heat pumps which leads to a large amount of waste heat that has to be cooled with evaporative cooling towers. The Environmental Court has ordered Vattenfall to survey the possibilities to recover the heat, which is the focus of this thesis.The study begins with an overview of the system, and conditions and limitations for waste heat recovery is examined. In the next step alternatives to recycle the heat is evaluated, either by direct recovering or by upgrading.First, the technical possibility of each alternative is discussed, and then the operation time and the amount of recovered heat is calculated. Those alternatives which are possible are brought further to an economic analysis.The cost of investment for each alternative constitutes the basis for a present value analysis. The results are put together in a table where the total amount of recovered heat is compared with the present value for the different alternatives.

At the end of 70s and the beginning of 80s, 18 terminals was built and used for chipping wood residue from clear cuttings. Most of the terminals was terminated before the 2000s but with the high oil- and energy prices that we can see today there might be a place for these terminals again. The goal with the study was to analyze and compare economical differences between 5 different logistical systems, collected data was used with a set of formulas. The systems include long range transport of slash, chips and bundles. Three of the systems include transport by lorry to industry the last two includes a terminal with access to train transport.

The aim of this study is to find a method to incorporate the energydemand of a building in the investment cost estimate.The study is based on an actual apartment block. The significant energyaspects are identified, and changed to more energy efficient options.These are then simulated using the energy calculation program VIP+.The calculated energy need is used in the investment cost estimate, andthe simulated alternatives are compared in regards to their economicalprofitability.Depending on the focus, different alternatives are the most advantageous.Since this study aims to show which alternative is the mosteconomically profitable, the annual profit is the parameter of mostimportance. This means that individual measuring of heating and hotwater use is the recommended change of the original house. A changeof the windows to new ones with a U-value of 1,0 as well as 0,8W/m2K also results in a positive change of the annual profit comparedto the original house..

The purpose of this Bachelor?s thesis is to explore the useability of bibliometric analysis on scientists of the humanities. This is accomplished by doing a case study on philosopher Slavoj ?i?ek. The work process and the results the case study is able to produce and the limits of these results are then analysed and discussed.In the case study all scientific articles in English published 1987-2010 citing ?i?ek were analysed.

Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.

This dissertation aims to explore how an investment appraisal differs depending on if it is conducted by a municipal or a private real estate company. Municipal and private real estate companies are not performing on totally equal terms in the property market. A municipal company in Sweden has a public service mission. The consequence due to that mission is that they have limited yield potential but on the other hand the right to certain subsidies. They are also limited by the law of public purchasing (in Swedish: Lag om offentlig upphandling) in the investment process.

Companies that invest in e-learning have different expectations regarding the outcome of the investment. According to literature and articles it is common that companies see reduction of costs as the primary benefit with e-learning. Therefore we ask ourselves the question if companies have attained the expected benefit of the investment in e-learning and to what extent cost reduction have been a determining factor in the investments? The purpose of the thesis is to examine if companies that invest in e-learning have attained the expected benefits. We also want to examine what the reason for investing in e-learning is and if cost reduction is the primary reason for investing.