Abstract The objective of our study was to get knowledge about how teachers think when they make purchases to preschool. Do they consider making environmentally conscious purchases? Do they work actively to transfer environmental consciousness to the children?We chose to interview nine preschool teachers and one cook in two different local municipalities. Our investigation showed that there was a very low engagement in these issues. The teachers said that they were very strictly bound to already existing public contracts and did not see any possibilities to influence the preschools consumption.The teachers hade no idea that not only their work could result in environmental savings in the school, but also result in attitudes changes among the children, their parents and, in the long term, society in general.

In this project a simulator has been developed (in C++) with the purpose of illustrating how changes in environmental regulations, tax levels and other policy measures affect the composition of an energy system. The aim of the project was to investigate how energy companies? investment strategies are affected when changes in economic and environmental conditions occur. A standard scenario has been created based on current Swedish conditions, but the user can create new scenarios and set parameters freely. The user is tasked with building power plants to supply the city/region with district heating and electricity during a pre-set number of years. When the simulation is finished the result is graded in the following categories: economy, environment and quality. To evaluate the simulator three scenarios were created (?early 20th century?, ?reduced environmental control? and ?future?) in addition to the standard scenario and these were compared with each other by examining how a select group of power plants perform under the given conditions.

War has for all through the years adopted various guises and been performed by various actors for a wide variety of destination. But what is really a war? Why is war fought? How is war fought? By whom is war fought? Machiavelli, Clausewitz, Kaplan, Kaldor, Creveld and Krulak are just a few among others who have made valiant attempts to explain war and its nature. What did they find? This essay maps out their studies in the hope of finding some kind of continuity that can give a clearer picture of what war really is.

Overdue cleanings have for a long time been an important topic of discussion within the forestry sector. When stands that have not been pre-commercially thinned are reaching the level of commercial thinning, many problems occur in terms of decision-making and economical outcomes. These types of stands are commonly known as conflict-stands. The work was carried out partly as an interview survey towards representatives from the forest sector and the energy sector, partly as a case study of conflict-stands situated in Böksholm, north of Växjö and in Tönnersjö east of Halmstad. The criteria for the studied stands were that they had to be dominated by Norway spruce and be in a severe status of ?conflict?. The aim of the interview was to get an overview of the situation today, and also analyse trends in terms of conflict stands.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The electric vehicle market has potential to contribute to Sweden?s national goal to have a fossil fuel independent transport sector by 2030. However, the market answers to a lot of challenges making it difficult for the market to fully reach its potential. The volume of electric vehicles has seen a steady increase during the last year (2012), although many of these vehicles are mostly for PR purposes or bought by the public sector that wants to lead by example. Still, barriers in the form of high purchase costs, an anxiety for the limited battery capacity and the lack of standardisation are some of the problems that the market is struggling to solve.

Automatic milking systems (AMS) have been in commercial use since 1992 and have since 1998 increased a lot. The objective of this study has been to examine the development of udder health on farms converting to AMS. The study also included a comparison of how udder health developed depending on how farms handled cows with mastitis. This was because farms choose to either milk cows with mastitis in a separate barn or in the milking robot. Other studies on udder health on commercial farms have shown that somatic cell count increases both among individual cows and in the bulk milk when converting to an AMS. No differences between before and after converting to AMS in the proportion of cows treated for mastitis can be found in the literature.

Abstract The IT- business is a fast growing business trade. This expansive line of business continuously demands flexibility both economically and legally. It is, today, of great importance to have knowledge about your own trade especially when it comes to new agreements. Laws and regulations are seldom flexible and adaptable tools, this is due to the fact it takes time to create new laws and, above all, it takes time to create laws with the right effect. This is where standard agreements enter the scene.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

As break downs of production transformers are costly and often result in long outages it is essential for reliability of operation that the transformers are manufactured to be robust. The aim of this M.Sc. thesis is to investigate if deviations should be made from the standard IEC 60076 ? Power Transformers in order to describe a robust large power transformer for procurement.The investigation has been conducted in three stages. In the first stage a definition of the term robust was developed in consultation with the client Vattenfall Vattenkraft.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Problemet med dagens standard för hygienrum och dess komponenter är att de baseras helt på tillgänglighet. Vilket i och för sig är en bra sak, sett utifrån att fler personer kan ha möjligheten att utnyttja bostadsfunktionerna även om de har vissa rörelsehinder. Men vi vill ta steget längre, inte endast se till tillgänglighet utan även se till vad som kan uppskattas, för att höja levnadsstandarden och uppskattningen av våra hem. Den svenska standarden är som tidigare nämnt baserad på tillgänglighet och är inte alltid anpassningsbar till nya lösningar och komponenter som kan förekomma i badrum, vissa saker ändras, får nya funktioner, kanske utökade användningsområden. Syftet är att försöka utöka möjligheten att nå högre kvalité för badrummet och samtidigt försöka se till de alternativa lösningarna som kan åstadkommas idag.

   To work and live in the same place where ones employer also is the landlord, can create a situation with many special requirements for the individual. Constrains regarding time, space and impact on social life is likely to appear. Based on theory and empirical research about the Boundaryless work and the Psychological contract the purpose of this report is to examine employees who live and work at the same place. This is done by studying the regulation regarding time and space factors and the psychological contracts in expectations and in violation of the psychological contract and the risks associated with this like Locked-in factors. The study includes interviews with managers and employees (n=9).

En central del i ett systemutvecklingsprojekt är de tekniker som används för att strukturera organisationer och informationen i dessa. I flera årtionden har traditionella tekniker utvecklats. Exempel på tekniker som anses traditionella är ER-modellering och dataflödesdiagram. Idag används objektorienterade programspråk mer och mer för att implementera databaser. Det har dock inte funnits stöd för att analysera ett system objektorienterat förrän i början på 1990-talet.