Sökresultat:
1540 Uppsatser om Collection phase - Sida 29 av 103
Utvärdering av en ny selektionsmetod för hingstsperma : med avseende på membranintegriteten och membranstabiliteten
Today, equine breeding is based on performance and conformation, resulting in a vast variation in fertility among different horses, with noticeable economic losses as a consequence. The horse breeding industry is therefore in need of methods that diagnose the spermatozoa concerning their quality and provide the best sperm for AI. The commonly used selection methods for sperm today are: centrifugation, where extender is added, the sample is centrifuged and then resuspended; swim-up self-migration; adherence separation; and density gradient centrifugation. However, none of these methods are in used routinely in practice before inseminating mares with fresh or cooled semen.
The aim of this study was to evaluate a new selection method, Single Layer Centrifugation (SLC), and its effect on sperm viability. The viability was analyzed with regard to membrane integrity and membrane stability of ejaculated spermatozoa.
Hur betydelsefull är CRM data? : En studie om användandet av CRM-system inom livsmedelskedjorna ICA och Coop
During the last few decades a new kind of business operation have developed and this hasforced organisations to adapt themselves to a new competitive environment characterized byincreased customer demands as well as a larger amount of competitors. Therefore companieshave had a shift in their strategies from focusing on sales numbers to focusing on thecustomer. To build lasting customer relationships, in order to create customer loyalty, havebecome an important part of the organisational strategy and the collection of consumer datais essential in achieving this loyalty. Customer relationship management systems assistorganisations in managing information about individual customers as well as managing allaspects of customer contact, with the purpose of increasing customer loyalty towards thecompany. The collection of consumer data also enables for companies to design personalizedoffers to individual customers in the form of direct marketing.
Toleranszon och kundtillfredsställelse i tjänsteföretag
The aim of this thesis is to describe how service companies through adjustment of the customer?s zone of tolerance can influence customer?s perception of the service during the processes of service delivery and create customer satisfaction. The method used was case study approach utilizing personal interviews, which were conducted at two service companies. The study showed that the aspects of the service that have greatest importance for the customer?s assessment of the service and customer satisfaction among others are personal treatment and that personel behave in the way that makes the customer feel itself taken good care of and unique.
I organisationskulturens tecken, budskap om organisationskultur
This is an essay with anticipations to bring out knowledge about organisational culture for the interested reader or explorer of culture in organisations. Focus positions on ingredients that can be understood as fabricating organisational culture. The essay is, for example, about values, norms, ethics peoples characteristics, that shapes an organisation. In this area of expertise there are numerous categories of scientists and disciplines that do research on this theme. Therefor it exists a rather various collection of definitions of what organisational culture is, or can be.
Myndigheter för hållbar utveckling : En studie av myndigheters miljölednignssystem 2005
Agencies towards Sustainable Development ? A Study of Environmental Management Systems in Governmental Agencies 2005A vision of the Swedish government is to build an ecologically sustainable society. A tool in this effort is to implement environmental management systems (EMS). The aim of the thesis is to present in which phase of the implementation of EMS Swedish governmental agencies are. This will be done by compilation and evaluation of agencies? yearly environmental reports.The thesis is written in co-operation with the Swedish Environmental Protection Agency (Swedish EPA).
Friskvårdsförmåner och förändringar i motionsvanor hos brevbärare
The purpose of this study was to determine if wellness benefits led to any changes in exercise habits among employed postmen. The study was a cross-sectional study carried out by a quantitative method. The collection of data took the form of a questionnaire. The sample consisted of 30 postmen employed at a post office in northern Sweden. The results show that of the postman who use health care benefits, there has been a relatively small change in exercise habits.
Känsla kontra information i fotokommunikation
Photography has a big role in information sharing today. Especially in the hotel
industry where it is the closest thing a customer can get to the product that
is being
sold. This study intends to find out how you can make use of rhetorical models
and
techniques of photography to enhance the communication skills of photos of hotel
rooms. The main focus was to understand the difference between informative and
emotional photographs and what consumers themselves focus on when choosing a
hotel, and also how to use the collected information to create a larger buying
interest
through hotel photography. Using previous research work and quantitative data
collection method, we have concluded that the informational and emotional
photography methods have obvious differences but also many similarities, and are
most effective used together and that the hotel consumer is more aware of the
images
influence then we assumed..
Kökslampa : tema Fransk Bistro
The report describes the thesis I, Philip Bergstrom, have done at the University of Gotland. The work comprises 15 credits and is at bachelor level and has been done in collaboration with Lyktan Bankeryd Belysning.The project consists of developing the design of a kitchen lamp for the Swedish home following the catchwords stripped French bistro that will fit into the Lyktan Bankeryd lighting spring collection 2013, and it should not look too alike any existing lamp on the market today.The work includes analysis of the company's current products and the image the company wants to project, analysis of three other companies' products to draw inspiration from, and a simple ergonomic study of the lights in the kitchen.The final result achieves the demands made and fits well in the intended environment, there is also the possibility for further development of both a floor lamp and a wall lamp..
Undersökning av avfallshanteringssystem : För ett nyexploaterat område i Ekhagen, Jönköping
Outside of many Swedish households today, you will find a typical green wastecontainer. This container has not changed since its introduction, despitecomplaints about foul-smelling and its impractical system. Even if the system usedtoday, still is the most optimal choice, there is a lot of newly developedalternatives out there.Its purpose is to get a broader perspective on how a waste management systemcan be developed into a working, land efficiently and aesthetically pleasing systemof humans and the environment in a small residential area.The authors treat the residential area of Jära, Ekhagen, in Jönköping, which ismanaged by JM AB as a problem area in regards to waste management.The issues raised by the authors are the different waste management systems usedin the corresponding areas of the world, how to apply technical andenvironmental as well as the waste management facilities from financial aspects.In the process, the methods used were literature reviews, case studies and aninterview. The case study was done through a modeling of waste managementsystems in the area Jära and an interview was conducted with the company Envacworking with vacuum systems. Studies have been made by different systems n theareas around the world.The results show that using directives and guidance will reduce the environmentalimpact done without replacing the traditional system.
Mot en museologisk värdeteori : Varför vi ger och varför vi samlar
The foundation for a museum is the collection. To collect, preserve and display is what constitutes a museum. But the process of deciding which object´s should be saved, and which objects should not, are based on values. It is also values that make people inclined to donate objects to museums. How and why we value a museum determine if and why we donate.Objects themselves could be said to have a biography just like people.
Miljöteknisk undersökning enligt MIFO : en studie på fastigheten Bodsjölandet 1:14 avseende den nedlagda tjärfabriken i Grötingen
During 40 years of industrial production, from the end of the 1890?s until the end of 1930?s, coal and wood distillation products were manufactured in AB Carbo?s tar factory along the River Gimån in Grötingen, in the county of Jämtland, Sweden. In accordance with the Swedish Environmental Protection Agency?s Methods for Inventories of contaminated sites, MIFO, the site in Grötingen has been identified as a potentially contaminated site. In order to determine whether toxic substances pose a threat to human health and ecological systems in the area, there was a need to investigate the presence of contaminants, their levels and potential for migration.
Konstruktion och utvärdering av diplexer
The report descripbs how a diplexer for a hybrid analog/digital filterbank has been constructed and tested. A diplexer divides the frequency band into two different bands that do not who doesn't overlapp each other. The sampling rate for the two ADC:s is 80 Msps, and therefore it is advantage to have zero at 80 MHz. The reason for this is that a proposed class of hybrid filterbanks with very good quality requires a zero at or close the sampling frequency to work well. The diplexer was made in three versions.
Motiven bakom en investering i crowdfunding
It is well known that small businesses and entrepreneurs in the initial phase has difficult to gain access to external capital and bank loans. With the background of the problems that entrepreneurs face when they ask for capital has since the financial crisis the phenomenon of crowdfunding developed and evolved. Crowdfunding is an alternative source of funding for entrepreneurs to fund their ideas through small or medium-sized capital contribution from a larger amount of investors, often investors who have any kind of relationship with the entrepreneur or to the very idea. This study examined the factors that motivate and guide an investor's decisions when they select their projects. The results of the study show that the motives of the various existing forms of crowdfunding is big.
Att fylla tidningarna med kris : En studie av kriskommunikation, nyhetsmedier och deras källor
The purpose of this study is to discover and explain the influences of media coverage of organizational crises on crisis communication, and vice versa. The study also shows how mediated crises develop, and how media framing and news sources affect this development.Carried out as a case study of three Swedish mediated crises, the methods used are quantitative and qualitative content analysis of media content from four Swedish newspapers and four organizations' press releases from the studied crises.Mediated crises develop through their specific pattern regardless of, but not independent from, the organizations' crisis communication. The crisis communication is used as an elite source in media reporting from the crises, but it can not control the mediated crises. However, it influences framing, and the possibilities to influence media reporting are better in the pre-crisis phase and the culmination..
Avståndsmätning med Hög Noggrannhet till Låg Kostnad
Active sensors are used a lot in the society and industry, for example to gain better control over processes or to get proximity sensing features in different products. Within industry there is great interest in developing safe automation products that can be controlled with high accuracy but still at a low cost.The goal of this project is to develop a prototype of a non-contact rangefinder that measures distance using infrared light. The sensor is to be used for various applications in industries with relatively high accuracy and be compact, but at a low cost. By implementing a rangefinder into a product, more accurate detections of an object?s presence can be done.In this project a new distance sensor, EPC600 from ESPROS, was used.