This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

Background: Bone anchored hearing system is a surgically implantable system for treatment ofindividuals with hearing loss. The Softband is intended for patients who can benefit from a boneanchored hearing system but who are not yet suitable for implant surgery.Objective: The aim of this study was to investigate whether an adhesive bone conductor, Adjoin, canbe used as an alternative to Softband.Material and Method: Twenty adult subjects with normal hearing participated in the study.Measurement of functional gain and speech intelligibility was performed with Softband and Adjoinwhich then were compared. A questionnaire was answered by the participants after the measurementsthat treated their subjective experiences with each option.Results: The objective measurements yielded no overall difference between Softband and Adjoin forthe group studied. The subjective results showed differences in the perceived comfort as well as whichof the two bone conductors that would be preferred to use in everyday life, with Adjoin being thepreferred option. No difference was detected on participants perceived gain, sound quality and speechintelligibility.Conclusion: Based on the measured results, Adjoin seems to be a suitable alternative to Softband.However, there are questions about how Adjoin works with long-term use..

The requirements of good quality and appetizing fast food increases continuously as a consequence of a community where food is always available. The crispiness of French fries is an issue that must be considered in this context, since it tends to decrease and give the fries a soft surface not appreciated by the consumer. To prolong the crispiness, the fries can be coated by a batter, a mix of starches. The batters used often consists of modified starches, e.g. cross-linked, acetylated and dextrinizated to increase and prolong crispiness, flour to stabilize the batter and sodium bicarbonate to make the batter ?rise?.The cross-linked starch keeps the granules in a swelled state and prevents them from breaking when exposed to heat or processing: therefore, it delays the gelatinization and decreases the stickiness of the batter.

This report is focusing on problems with introducing standard enterprise resource planning systems (ERP) in businesses. A study has been carried out on a service and support department at a Swedish heat metering company, SVM North Node. The study aims to help the company become a better customer in choice and customization of a new ERP system. We make a description of the department studied and the work carried out there, on the basis of learning, knowledge and cooperation. As a final point we present some ideas on how computer systems could support their work, hoping that this will result in them making adequate demands on a new ERP system.

Based on laboratory studies with lysimeters, the concentrations of dissolved reactive phosphorus(DRP) and particulate phosphorus, which is the main part of other P (OVRP), has been studied inpercolating water. The experiment was conducted through irrigation of small soil columnscontaining clay topsoil from an experimental field in Västergötland. Three rain simulations wereconsecutively performed. DRP concentrations in the percolating water ranged between 0.2 - 0.3mg·Lclearly related to the phosphorus concentration in the soil, measured in a soil extract ofammonium lactate (P-AL). Concentrations of OVRP were relatively low and ranged between0.12 and 0.16 mg·Lwas not proven and the experiment may reflect how a relatively slow percolation of water mayrelease DRP.

The purpose of this thesis is to evaluate the combination of bibliographic coupling and three hierarchical cluster analytic techniques: average, complete and single linkage. Bibliographic coupling is applied as a measure of similarity between recently published articles and the cluster techniques are used for the partition of a set of articles into subsets of articles with similar research focus. The field of information science is applied as the test arena and the selection of data, i.e., the article population to be partitioned, is based on a number of central journals. Methods of evaluation include both quantitative approaches as well as a qualitative one. For comparing the resulting partitions, adjusted Rand index is utilized and for the establishment of cluster coherence and isolation, measures of average normalized coupling strength is applied.

This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.

Syftet med denna studie var att undersöka mödrars upplevelser av hur överföring mellan mor och dotter kan se ut gällande kroppsuppfattning och utseende, samt hur överföringen kunde påverkas genom medvetna val i mödrars eget förhållningssätt till sina kroppar. Tidigare forskningsresultat visade att moderns förhållningssätt till den egna kroppen i relation till kost och motion påverkade döttrarnas ätbeteende. De teoretiska utgångspunkterna var Bowlbys teorier kring anknytning, Meads den generaliserade och signifikante andre, Bourdieus begrepp hexis samt Chodorows teorier om modersfunktionen. Fem intervjuer med mödrar, i åldern 35-45 år genomfördes. Samtliga intervjuer spelades in för att senare transkriberas.

The relational database model was defined in the 1970?s and is the dominating database type today.  The main difference between data from a relational database and a hierarchical data structure is that the relational database stores records in tables. The records have no particular order, but can include links in terms of relationships with other records. A hierarchical structure organizes data in the form of a tree structure  and  can for an example be found in organizational structures in which different levels involves different responsibilities. If the data stored in a relational database is to be presented in a hierarchically, a conversion of the data structure is required. The intention of this paper is to describe how such a conversion can be performed.  To investigate the conversion methods, case studies has been conducted on the basis of a specific organization?s hierarchical structure.

Background: Operating on the stock market is associated with risks. If a particular asset is not traded with the same frequency as the average market asset, this particular asset is exposed to a liquidity risk. It means that the investor might not be able to sell the asset at a desired time without incurring expensive transaction costs. The query is whether or not the investor is compensated with a liquidity premium for bearing the extra risk. Earlier studies on the Stockholm Stock Exchange have failed to prove that there is a relation between stock return and liquidity.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

Saab Aerosystems has a long tradition and a lot of competence in the field of flight simulation. Their ambition to broaden the market horizon has led to a discussion about also selling vehicle simulation solutions, both for military and civilian use.The aim of this thesis is to investigate the driver?s experiences of the accelerations he or she is exposed to whilst driving in rough terrain. The results may be used as a basis for future decisions and can act as a platform for the construction of an effective simulation model.To investigate the driver?s exposure of acceleration, some kind of dynamic simulation is needed.

When exposed to them, isocyanates can induce serious injuries in the respiratory tract and irritation on the skin and in the eyes. They are therefore interesting from the point of view of occupational health. The purpose of this thesis was to collect isocyanates in air with impinger-filter samplers and solvent free samplers. Furthermore the isocyanates were to be analyzed with liquid chromatography-mass spectrometry. The solvent free sampler consists of a polypropylene tube and filter holder fitted with glass fiber filters impregnated with derivatization reagent, coupled with a pump.

The relation between LIS and physical bibliography is examined primarily through an analysis of such LIS literature as applies physical bibliography in research or otherwise discusses its relevance to information studies. Quite a number of scholars are stressing the usefulness of this bibliographical tradition, even though its position in LIS agenda as a whole seems to be less established. These scholars suggest that physical bibliography presents interesting conceptual and theoretical implications for many of the central objects of study in LIS, for example, knowledge organization, information retrieval, and information seeking. It is also suggested that physical bibliography could help deepen our knowledge and understanding of the digital media ecology. Physical bibliography is foremost seen as a method for the analysis of documents, a method in which not least its terminological apparatus may be a significant tool.

Turning solar collectors, heliostats, is certainly not a new idea but has been explored for at least two decades. Projects on this subject have resulted in more or less realistic constructions, in a commercial point of view. Far too often the technical goals have had higher priority than the economical, which has resulted in a few constructions having the ability to compete with conventional, fix solar collectors. The economical issues have been given high priority in this project, without decreasing the demands on reliability. The system has been given the following mechanical and electronical properties: One-axis movement, fix heat carrying fluid system, microcomputer controlled movement and automatic protection from overheating.