A game designer has to consider several aspects when he or she is designing a game. One of those aspects is the perceived freedom in the game by the player. There exist several methods to facilitate this perceived freedom in the design phase of the game. This thesis presents, in a qualitative methodology, a number of these methods a game designer might utilize to give the player a heightened sense of freedom for an improved gaming experience. Included herein are such elements as indirect control, linearity, storytelling and level design..

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Trädgårdens hantverk och design, 15 hp, 2015.

The purpouse of this study is to find out how and if a Content Managment System (CMS) can benefit from applied User Experience Design (UX). A work project has been executed where a client wanted the students to create a user friendly CMS for adding content to a global hotel review site. A prototype of a CMS was created based on literature studies about UX and CMS. The prototype of the user friendly CMS was then tested through user tests and interviews with key users. After input from the key users the prototype was changed until the users were satisfied with it..

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

I Sverige infördes år 2005 nya regler för redovisningen i börsnoterade företag. Från och med den 1 januari blev dessa företag enligt lag tvingade att följa det regelverk som International Accounting Standards Board författar. Dessa standarder blev då gällande i hela EU.I vår uppsats inriktar vi oss på en av dessa standarder och dess amerikanska motsvarighet, nämligen IAS 38 som behandlar redovisning av immateriella tillgångar. Vi fokuserar på den typ av immateriell tillgång som uppstår genom forskning och utveckling. Den amerikanska motsvarigheten till denna standard heter FAS 2.International Accounting Standards Board är ett av två ledande organ som på ett internationellt plan definierar hur redovisningen ska se ut.

IT is often seen as a solution to many problems concerning effectiveness in organizations. Information systems within the healthcare sector is often viewed as medical devices rather than just systems or services. These medical devices are thoroughly regulated by laws, standards and certifications. In this study I participated in an innovative project that aimed to bring new life and use to the old fashioned patient journal by giving it a visual representation through the use of an avatar. I aimed to study the effects of regulators connected with the patient journal as a source of information for the innovative project.

The purpose of this thesis is to examine and analyze how to improve the design of a Microsoft Surface SUR40 application. The application in focus was an interactive product browser developed by the company Spree, our external client. Spree is a multi-touch software provider, established in September 2010 and they expressed a need for suggestions for how to improve this application. Our work aimed at revealing how to make the application more suitable for several users and make it easier for them to interact simultaneously on the surface. From a qualitative standpoint we have examined how 17 users experienced the application.

The purpose of this study was to examine how local producers in the food and confectionery segment in Västernorrland, Sweden, working to communicate that the product is locally produced through its packaging design. We have chosen to look at how they work with the right packaging design because it is such an important part of the product marketing. A further aim was to examine how consumers perceive the packaging design of the locally produced products and how they consider that the packaging design communicates the product as locally produced. We have also analyzed the graphical elements contained in the locally produced product packaging through a semiotic analysis.The theoretical framework is based on theories in brand communication and Visual Communication, specializing in packaging design?s visual elements.The method used in this study is a qualitative method.

Bakgrund och problem: Från och med 2005 är det obligatoriskt för alla börsnoterade företag inom EU att tillämpa IFRS, International Financial Reporting Standards, vid upprättandet av koncernredovisningen. En av dessa standarder är IAS 14, segmentrapportering. Den reglerar hur rörelsegrenar, affärsområden och marknadsområden ska redovisas. Nu finns ett utkast till standard från International Accounting Standards Board (IASB) som är tänkt att förändra och förbättra gällande standard avseende segmentrapportering, IAS 14. Syfte: Att undersöka vad revisorer, företag och analytiker tror om den föreslagna förändringen av segmentrapporteringen och vilka konsekvenser det kan medföra.

Denna rapport är ett examensarbete inom maskinteknik på c-nivå (15hp). Då författaren ansåg att dagens hammockar inte utvecklats speciellt mycket sedan de blev populära i Sverige på 60-talet, valde han att ägna detta arbete åt att försöka ta fram en mer modern sådan. Projektet har huvudsakligen handlat om produktutveckling och design där mycket tid spenderats på att lösa alla de olika problem som de satta kraven på nya funktioner bidragit till. Arbetet startade med en omfattande förstudie. Därefter vidareutvecklades de olika idéer som framkom under förstudien ytterligare.

The task for this thesis is to design a tool that is used to cut-out preforms of thermoplastic adhesive and also to make an estimate of costs for the stamping tool. The tool is used in the repair process at the MCM production line. The result of gathered information has affected how the design of the stamping tool has developed. The handling of thermoplastic adhesive in the repair process is one of the factors that influenced the design. The adhesive is sensitive for exposure to moisture. Therefore an automated feeding system of the adhesive is not recommended. The users wished for an automated stamping tool.

The comprehensive purpose of this Master of Science thesis is to examine which fleetmanagement services for engineering vehicles, ?Fleetech? preferablyought to develop inorder to reach a broad market and meet the demands of contractors.Scanty explained, fleet management is the management of a company's vehicle fleet and theservices can include a range of functions such as driver management and fuel management. Inshort the thesis encompasses four sections:1.Survey of the general contractor industry: The survey has been preformed toevaluate the potential size of the market for fleet management services in the generalcontractor industry.2.Needs analysis: The needs analysis aim was to define what contractors tasks andgoals are, and to determine what functions they want and need from a system.3.The use of CAN and the technical premises: The prerequisite for developing asophisticated and generic system is that vehicle data can be accessed from the CANbuss.The use of CAN standards in construction equipment has therefore beenexamined.4.Specification: An explicit set of requirements have been set to be satisfied by a fuelmanagement service, based on CAN standard protocol J1939.Important conclusions: The use of CAN protocol standards are extensive and the prerequisitesfor developing elementary and CAN based services good. The services should be compatiblewith different manufacture?smachines.

This project will search for the sound in the contemporary landscape architecture, an attempt to combine music and land­scaping. In a first stage, I have searched for outdoor environments where loudspeakers are used, and sites with a concious sound design. The project will result in a sound design created for the park Frodeparken in Uppsala, Sweden. In my search for sites and examples of conscious sound, I have talked to the people behind the projects I found - landscape architects, sound artists and architects. Influences from different areas have been essential for me in the project.

There is a lot written about being hearing impaired. There are guidelines on how to adjust the indoor environment for the hearing impaired. There is even more written about gardening and garden design from different aspects. However, I found out that there is nothing written about garden design or adjusting the outdoor environment for the hearing impaired. At the background of myself being hearing impaired and garden designer I realised that I actually had adjusted my own garden out of the fact that I am hearing impaired.