In this report we describe an adaptive simulated annealing method for sizing the devices in analog circuits. The motivation for use an adaptive simulated annealing method for analog circuit design are to increase the efficiency of the design circuit. To demonstrate the functionality and the performance of the approach, an operational transconductance amplifier is simulated. The circuit is modeled with symbolic equations that are derived automatically by a simulator..

The last few decades the development in the field of electronics has been huge. The components performance gets better at the same time as the manufacturing cost decreases. Many of the design moments that have to be done, are done automatically today, but it can get better. Especially for analog circuit design.At Electronic System in Linköpings universitet, research is in progress to develop a tool that can design analog circuits in reasonable time. It means that it has to size the components (transistors, resistances, capacitances etc), so that the circuit can fulfill the performance requirements.

This rapport is result of a project. The purpose of which was to design a circuit that is used in a heat glove. The heat glove is the technical aid which provides heat inside a glove.It is specially suited for old people who have problems with cold hands because of decreased blood circulation.There already was an old circuit in the glove that gives a constant current which develops heat from battery to glove through a circuit. The temperature is between 32 and 34 degrees.The problem with the existing circuit was to regulate the temperature. There is only on/off switch and there is no way to adjust desirable value of the temperature.In order to solve the problem the old circuit was investigated.

The purpose of this thesis has been todesign an electric circuit that measurestemperature in three different ways. Asoftware was also designed to record andanalyse the measurments. The result of thecircuit was a PCB with inputs for 42sensors of both surface and non-surfacemeasurments. These all have a maximumerror of ±3°C..

This master thesis has been performed at Vattenfall Power Consultant in Gothenburg and Trollhättan for Vattenfall Vattenkraft. In this report vacuum circuit breaker in small-scale hydropower stations with the rated power 4 MVA and below has been studied. Models of the stations are modeled and analyzed in PSCAD/EMTDC to study the high voltage transients that are created after current chopping with vacuum circuit breaker. Vacuum circuit breaker may chop the current before it reaches zero value, which means that high voltage transients can be created. The equipment of the stations can be destroyed by high voltage transients.The purpose of this thesis is to examine the use of vacuum circuit breaker in small-scale hydropower stations and the risk for high voltage transients from current chopping.According to the results there is a risk of high voltage transients after current chopping with small synchronous generators in stations with the operating voltages 0.4 kV and 3.6 kV.

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

The focus of this thesis is primarily in electronic construction and describes the design process for a microcontroller circuit board from concept development to prototyping. The client develops test fixtures for automated testing of products within the electronics industry and needs a new controller circuit for the test fixtures that can handle controls and basic testing. An investigation into the needs of such a system is conducted and a prototype printed circuit board assembly is manufactured.The prototype is developed with focus on protection against electrostatic discharges and overvoltage. Among the functions that are included are voltage measurements, communication interfaces and control of input and output currents. Firmware for the prototype is developed and configured to communicate with a PC through USB interface for control and collecting of measurements..

Ever since it was first introduced in an article in the Journal of Finance 1952, Harry Markowitz? mean - variance model for portfolio selection has become one of the best known models in finance. The model was one of the first in the world to deal with portfolio optimization mathematically and have directly or indirectly inspired the rest of the world to develop new portfolio optimization methods. Although the model is one of the greatest contributions to modern portfolio theory, critics claim that it may have practical difficulties. Partly because the Markowitz model is based on various assumptions which do not necessarily coincide with the reality.

The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The module should be able to measure current, voltage and resistance.The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made. The result of this project is a constructed DMM board.

On Ericsson Ltd in Borås a wireless communication system called MINI-LINK? is produced. In order to sell their product with the best possible quality guaranty, there is a signal processing circuit called ATLAS implemented in the system. This circuit would eventually be useful in the production and for the repairs of the radio units. Our commission was to examine the possibility for this use.

In Sweden the amount of people with obesity has increased with almost 50 % during the past 20 years and is now including 500 000 people. A larger energy intake than energy consumption is today one of the most important cause of overweight and obesity that exist in the world. This requires more knowledge about healthier eating habits combined with moderate intensive exercise, exercise that is simple, effective and amusing. A god solution is a combination of fitness training and strength training, a type of circuit training. It is distinguished by a high intensive work in short periods and with a short break.

This master thesis studies how much the cycle time, i.e. the time it takes for an industrial robot to perform a given task, can be reduced if an extra degree of freedom (DOF) is added to the robot system. The extra DOF consists of a linear track, which is supposed to be used in an optimal way. The problem has been studied using simulations in the robot simulation tool RobotStudio. To be able to run an optimization in Matlab, with the RobotStudio simulation cycle time as the object function, communication between Matlab and RobotStudio has been set up with an interface written in Visual Basic.

In this thesis a number of energy saving methods for a multiplier on algorithmic level are investigated. For the investigation a multiplier is constructed in VHDL, after which the circuit's performance is investigated. A number of techniques for reduced power consumption are introduced in the circuit and are then evaluated. The conclusions are that all investigated methods, pipelining, interleaving and voltage scaling, should be maximally made use of in order to minimize the power consumption..

Norrborns Industri AB in Bollnäs manufactures truck trailers with the brand Parator. One of their trailers is Parator LX 10-20. The trailer is designed to transport hooklift containers with the option to tip loose goods such as gravel, asphalt and seed. The container is mounted on a frame which is placed on the chassis. To reduce weight a redesign of the trailer is needed.

The purpose of this thesis was to help the company Medius AB with optimization of selected parts in an existing system to minimize the execution time by implementing multithreading. The idea was to manipulate the code so that calculations could be executed at the same time. The main work in this thesis consisted of three optimizations. The first one was to reconstruct a big ?for-loop? so it would execute every loop's work in an own thread. The second optimization also was a reconstruct of a ?for-loop? so it could execute the work in different threads. The third and last optimization consisted of reconstructing a stored procedure on the database, so different parts of it each could be executed in an own thread to create data at the same time. To implement the optimizations Visual Basic .NET and its support for multithreading and connection-pools was used. The result of the optimizations meant that one of the modules could be executed more efficiently and it was 12 % faster. The other modules execution time was more efficient by 25 % faster. The meanings and requirements for this thesis are fulfilled by now letting the system make use of its resources in a better way..