The aim of this study has been to examine the role of control mechanisms when it comes to building relationships in a small business network. In order to reach this goal, we have performed a case study of a Swedish supplier of machines to the engineering industry, which acts as the exclusive representative of a foreign manufacturer on the Swedish market. Main results: A number of control mechanisms, both formal and informal, could be identified in the network. Their specific use, as well as relative importance differ between different actors in the network. In general, the importance of formal control mechanisms decreases as the relationship evolves over time and the importance of informal ones, mainly trust, increases in a corresponding manner..

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

PURPOSE: To analyze how companies in the Swedish beer industry strategically workingwith CSR externally in order to increase their legitimacy.METHOD: Qualitative interviews and text analysis to enable data to stakeholder analysis.MATERIAL: Respondent interviews with key individuals, textual analysis of CSR-relateddocuments of the largest beer producers in Sweden.MAIN RESULTS: The study shows that it is possible to distinguish three main categories ofstakeholders to the beer producers. These have various high stakeholder values, wherecustomers are those with the highest value, then consumers and third critics. That these havevarious high values allows different strategic approach to the key issue of how preventivemeasures, that can be said to work against their own products, affects the beer producerslegitimacy among stakeholders..

PURPOSE: To analyze how companies in the Swedish beer industry strategically workingwith CSR externally in order to increase their legitimacy.METHOD: Qualitative interviews and text analysis to enable data to stakeholder analysis.MATERIAL: Respondent interviews with key individuals, textual analysis of CSR-relateddocuments of the largest beer producers in Sweden.MAIN RESULTS: The study shows that it is possible to distinguish three main categories ofstakeholders to the beer producers. These have various high stakeholder values, wherecustomers are those with the highest value, then consumers and third critics. That these havevarious high values allows different strategic approach to the key issue of how preventivemeasures, that can be said to work against their own products, affects the beer producerslegitimacy among stakeholders..

Detta är en kvalitativ studie som baseras på innehållsanalys av två etnografiska dokumentärfilmer. Den första är den världskända ?Nanook of the North?, här får man följa inuiterna under ett år (1922). Den andra filmen är ?Ett år med Samer och Renar?, här får man följa samerna under ett år (1993).

Background: The design industry is relatively immature in Sweden but large on the international market, where companies have used services from industrial design firms for a long time. Companies incresignly realise that design is an efficient mean to gain competitive advantages on the market. Several design companies fancy growth and to receive a wider market share to expand on the international market. One of them is Design Communicaton who has made a couple of acquisitions, to receive wider comptences and to cover different segments. That has lead to an increased brand portfolio with different subbrands, which can be complicated to handle efficiently in the internal and external communication.

Major changes within the agricultural politics today have forced the dairy production to scaleup, in order to compete on a global market. This has resulted in a reduction in the number ofsmaller dairy farms in Sweden, from about 40000 to just over 4000 over the last 30 years. Thepurpose of this study Svenska mjölkbönder, snart ett minne blott? ? Markbygdensmjölkbönder i tankar om mjölkproduktionens nuvarande situation och framtidsutsikter, is topresent the opinions of dairy farmers in Sweden, regarding the Swedish dairy industry and therelation to their own dairy production. A secondary purpose is to problematize how theconsequences of pastures and cultural landscapes influences human society as dairy farms andgrazing animals are becoming fewer.

This essay discusses how insurance companies inform policyholders regarding home insurance. What level of support do insurance companies offer policyholders in order to supply them with enough knowledge to make an informed decision? Is information regarding insurance communicated in simple terms, or is it riddled with industry specific terminology?The essays focus is important to examine from a social context; Swedish social process does not select an insurer for an individual who neglects to choose one for their home insurance. Sweden's welfare system does otherwise provide a helping hand for a lack of decision with regard to preschool and school choice..

In this thesis, the flows of reactive nitrogen (Nr) in Scania were investigated and quantified. The thesis was also intended to form a basis for comparison between the urban nitrogen flow and other flows of nitrogen within Scania. The management of nitrogen in society has disturbed the natural nitrogen cycle. This is linked to a series of environmental problems such as eutrophication, acidification, global warming and smog. The method used was Substance Flow Analysis (SFA) for Nr. For calculation and flow charts Scania was divided into three subsystems; air, water and society.

This thesis project focuses on the need for better tools for analyzing competition for forest fuels in Sweden, in particular how policy measures may influence the market and involved actors in different regions of Sweden. Raw materials from the forest have for long constituted important inputs in the Swedish forest industry. Today some of these raw materials are increasingly used as inputs also in bioenergy production, largely driven by bioenergy promoting policies, and there are signs of increased competition for forest fuels which may have various and uncertain effects on the industries in question. The thesis project explores the possibilities to adapt previously used forest sector equilibrium models into a new model suitable for analysis of Swedish forest fuel markets, called the Swedish Forest Sector Trade Model (SFSTM). The approach takes into account regional differences in supply and demand for 23 types of products produced and/or used by eight types of producers, plus consumers, in five different regions (four Swedish and one international).

This essay brings up how experienced texture artists in game development can get comfortable in their workflow and therefore not spend time on learning new techniques that in the end could be more efficient. We base this on theories that people often choose the path of least resistance, which in the case of an experienced texture artist would be the path they have learned and are comfortable with. We also talk about the popularity of Photoshop and that many of today?s texture artists in the game industry are using it and that this could be because Photoshop was one of the first programs that could be used well for texturing. Because of this many learned to use it and stuck by it and then taught Photoshop to new texture artists because that is the program that they know.

This thesis reports on a case study of two different organisational forms in the Swedish forest industry; the geographic and the functional organisation. The work in the geographic organisation is carried out within districts under the supervision of an overall responible district manager, where as in the functional organisation the work has been divided into functions headed by function managers. Forest magement, logging and wood purchases are examples of such functions. The general idea of the functional organisation is having the functions working over a larger geographic unit, without subdividing district boundaries of the region. Also a third organisational form of current interest for the forest industry; the process orientated organisation, is analyzed in the case study. Here, a company outside the forest industry has been analyzed, since no forest company was considered to have made as much progress of changing organisation to process orientation. In the report I present the results from qualitative interviews, where I give the reader a picture of the motives behind each organisational form, what the form implies for some of the company?s interested parties and the organisations? views on future organisational development.

This report is about Adobe Acrobat 3D and their new PDF format witch can contain 3 dimensional models that are interactive. The purpose is to find out if the program and the format work in a level that is suitable for the market. To create this PDF you need Acrobat 3D installed on your computer but it only needs Acrobat Reader 7 or 8 to open it, and the Reader is free to download on the internet.The examination is focusing on four formats: U3D, 3DS, DWG and DXF because they are the most common in the building industry seen from the architects? way. From a 3D model exported to these four formats they where converted to PDF in different settings to be compared in different points as information and size of the files.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

Companies and projects often face the challenge of creating something new to increase their competitiveness. In this process of creating something new creativity is an important factor. By using a creative approach and utilizing creative processes new innovations emerges. An industry that has grown in recent years is the computer games industry. Competition is fierce and for the companies to succeed, the product need that extra something to make it stand out among all the produced games.The project manager's role in the creative process and the ability to be creative within a distance based company is not something highlighted by previous research.