Today?s construction buildings contain more advanced technologies than before. The development of newer and stricter regulations to the construction industry makes the door environment more and more complex.In large construction projects the door environment is held up as a major challenge to get to in a good way. It turned out after a discussion with one project manager and a site manager at NCC, that the door environment is difficult to get right in major construction projects and it often causes many error reports in to the aftermarket after that the final inspection is completed.Interviews have been done with key figures in the building process at NCC and Akademiska hus. A study on a university building for around 3500 students and with 300 workplaces was made.

Landfill leachate contains a variety of contaminants and is created when rainwater percolates the landfill. For landfill management the leachate is the main issue that can cause problems to the environment. At the landfill of Fläskebo, Renova AB treats the leachate in a local treatment plant. The treatment consists of a chemical treatment step with chemical precipitation, flocculation, sedimentation and filtration, and a final step with a carbon and peat filter. Renova has to ensure that the condition of the leachate reaches the regulation set for the landfill before it is released to the recipient.

Field balances based on supply and removal of trace elements from the topsoil have been calculatedfor farms specialized in crop, dairy and pig production in Sweden. Today's field balances have beencompared with the field balances of 1990 in order to examine if, and then how, the situation haschanged. Studied trace elements are arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu),mercury (Hg), manganese (Mn), nickel (Ni), lead (Pb) and zinc (Zn).The balance calculations show that the stores of Cu and Zn are depleted with an average rate of -15% and -6 % over a 100-years period on crop farms when only commercial fertilizers are being used.The concentrations of Hg and Pb tend to increase in the topsoil on crop farms with more than 3 % forHg and with 2 % for Pb in 100 years. There is today balance between supply and removal of the traceelements As, Cd, Cr, Mn and Ni. In the south of Sweden, on crop farms with sugar beets in the croprotation, one can see a decrease in the concentration of Cd in the top soil by -6 % over a period of100 years.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

This candidate.?s work includes designing of a house with it.?s structural components andinstallations. The house had to be actual with Building Regulations (Boverkets Byggregler).Beside designing of all the crucial systems necessary for completing of claimed regulations evenan optional topic within building engineering had to be chosen.The task included designing of heating, ventilation, sanitation and electricity systems. Structuralengineering models has been made in compliance with Eurocodes. Materials for facades, floorsand roof were chosen and evaluated.As recessed portion of the work, evaluating of possibilities in designing of a glass roof waschosen.

Is the new technology always the best? This final project tries to determine if BIM is the melody of today, or if traditional 2D drawing is recommended. Perhaps a compromise is necessary, utilizing both methods.In order to answer this question, different views from the industry have been retrieved through reports, producers of software and users. The approach has consisted in building a 3D model of the school Råslättsskolan, house 01, along with interviews with people involved in the building process.When working in 2D it is hard to include the third dimension, mistakes are done and collisions happen that must be corrected, in most cases at the construction site. BIM is an incredible help since the model allows you to detect collisions and correct them.

This work consists of a survey and risk classification of eleven metal industries including foundries, finishers and engineering industries in two industrial areas in Mora. The study follows a method called MIFO (Method of Surveying Contaminated Sites) composed by the Swedish Environmental Protection Agency. In the method assessments of the degree of hazard posed by the pollutants, the level of pollution, the conditions of dispersal, sensitivity and the degree to which the area is worthy to protect are made for each contaminated site (object). The assessment classify the objects into four risk classes in which risk class 1 denotes a very large risk, 2 large risk, 3 moderate risk and risk class 4 little risk. The work of surveying using MIFO is divided into two phases.

Rapporten presenterar en femstegsmetod för hur man kan minska vikten på ett timmersläp med hjälp av omkonstruktion och genom att använda höghållfasta stål istället för vanligt konstruktions stål. Arbetet har utförts åt LuCoil Steel AB i samarbete med Bodensläp AB, släpvagnstillverkare. Jämförelser har gjorts mellan ett befintligt släp, tillverkat av Bodensläp AB, och ett nytt koncept, framtaget med denna femstegsmetod, där LuCoil Steels höghållfasta stål har använts. Arbetet har begränsats till att gälla själva ramen, det vill säga de två längsgående balkarna på släpet och stagen mellan dem. Resultatet är teoretiskt och har inte testats i verkligheten.

Our greatest interest within crop farming is to grow sugarbeets, that?s why we want to write about something new in this sector. We heard that a new concept had come to Sweden so we wanted to find out everything about this machine. This new technique was a self-propelled cleaning loader for sugarbeets. This machine is supposed to replace a loader and a cleaning machine when the sugarbeets is going to be loaded, cleaned and delivered to the sugerbeet factory. The cleaning loader picks up the sugarbeets with rollers from the pile, which is placed close to the road.

Vi har valt att undersöka vilka möjligheter och eventuella risker det finns att bygga högt i Stockholm. Undersökningen utgick på att jämföra olika byggtekniska lösningar för stomsystem. Hur tar stomsystemen hand om vertikala och horisontella laster? Vilket stomsystemen är lämpligast vid en viss höjd? Dessa är några av de frågor som besvaras i arbetet.De vertikala och horisontella lasterna är de faktorer som främst försvårar höghusbyggandet. Med en större belastning av laster ju högre det byggs måste stomsystemen dimensioneras med allt större noggrannhet för att lasterna ska nedföras till grundläggningen på ett säkert sätt.

Ovako Steel AB i Hofors tillverkar varmvalsade rör. Ett av de sista stegen i tillverkningsprocessen är en konventionell valsning i ett antal valspar kallad reducervalsning. De valsade rören uppvisar ibland en ojämn väggtjocklek längs rörlängden på grund av att det uppstår drag- och tryckspänningar i rören mellan valsparen. Syftet med examensarbetet är att öka kunskapen om dessa spänningars inverkan på det färdiga röret samt ge förslag på hur processen kan förbättras. I examensarbetet har undersökts vilka parametrar som påverkar spänningarna i valsningsprocessen.

Research in solar energy is taking big steps in both solar heating and solar electricity. It´s not only the technologies alone, but also the combination of both solar electricity and solar heating which is what is called a solar hybrid. The idea of a solar hybrid is that a solar cells efficiency decrease with increased temperature and can with help from a solar collector be cooled and the heat can be utilized. This thesis report compares heat production and electricity production with respect of, in first hand, a solar hybrids geometry in the cooler. The theory chapter describes solar heating and how different solar cell technologies work and their environmental impact at the production and how compatible these technologies are for the solar hybrid.

Lättelement located in Örnskoldsvik AB is one of Sweden's leading companies in the development of building elements in the form of roofs, walls and floors made ??out of light beams. The company has clients from Lund to Kiruna, and from Norway. This means that the elements have high standards when they have to take many different loads from wind and snow due to such wide geographic variation.The roof elements are structured so that the main body is made of light beams with an I?profile.

Today, we use BKR and BBK 04 when designing concrete structures inSweden, which will, in the near future, be replaced by Eurocode 2. When you are designing buildings, you will use Eurocode 2 Part 1-1 and with this new standard, some new rules and general rules will be necessary to adopt. To examine how BKR and BBK 04 tells apart from Eurocode 2 when designing concrete structures, one beam and one column with often common dimensions, is studied. The beam is designed with consideration of (considerate to) durability at bending moments, shear forces and control of cracking. The column is designed with consideration of durability at eccentric axial load and bending moments in cross section on account of (due to) geometric imperfections. BBK 04 has gone one step closer to Eurocode 2 than earlier editions and the things that are different, when calculating reinforcement, is how they use the partial factors.

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.