Texo Application has created robots that they call for satellites; with these you can feed in storage pallets into a satellite storage. Satellite storages consist of channels in height (e.g.3 to 8 pieces) and width (e.g.3 to 100 pieces). Channels can be different long (e.g. 5 to 200 pallets). At deposit of a storage pallet the truck insert the satellite in a channel and then the pallet, the pallet is driven into the channel until it reaches another pallet or the other end.

Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

Title: Multi channel publishing: a qualitative study on how Norrköpings Tidningen publishes news in multiple channelsAuthor: Roland AlbinssonThesis supervisor: Per-Anders ForstorpBackground: In this day and age, the media is omnipresent and a part of our daily life. The phenomenon of media convergence can be traced back to the birth of the internet, and today all of the major newspapers have a website of their own. As a result of multichannel publishing, consumers have a wide range of tv channels to choose from, but there is still uncertainty as to whether more channels automatically equates to more and better news. There is no doubt about the fact that multi channel publishing is a necessary survival skill for media conglomerates today, but effects such as news recycling and the concentration of ownership are in conflict with the consumers? availability demands.Purpose: The purpose of this thesis is to, by means of a case study, describe how NT?s multi channel publishing is an expression of media convergence, as well as to study how the news are affected by multi channel publishing.Research procedure: This study is based on three different research methods, observations, text analyses and qualitative interviews.

With the fast development of Internet and the e-commerce during the last decades, retailers are now introducing online stores. This has been adopted as a common strategy within the industry and the phenomenon seems likely to increase over time. Theory based on brand extension is used in this study to explain the effects on brand attitude and the link with willingness to pay when a traditional retailer introduces an online store. We execute an experimental study in order to investigate the effects where we use the offline- and online channel as well as two brands with different strengths as independent variables. Results show that brand attitude and its link to willingness to pay transfers to the online channel.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The purpose of this thesis was to analyse, model and finally generate dynamic vehicular motions in a train. The objective with the analysis was to find important motions for a realistic train experience. The motions from the analysis were then weighted against possibilities for generation in a motion platform.A dynamic motion model was created to model the selected motions. The model was implemented in a simulation environment, more specifically MATLAB/Simulink. The simulation environment was used to simulate the model and to generate outputs to control a motion platform.

Internal communication is very important for the success of an organization. The county council Landstinget i Värmland is a large organization with many managers on different positions. Every one of these managers gets an email every week, with the message that a new manager letter, called Chef, is published on the intranet. With my paper I am examining what the managers think of this letter, how they use it and if managers on different positions differ from each other in opinions about and use of the letter. I want to find out if there is a need of Chef as a part of the internal communication of Landstinget i Värmland.To answer these questions, I have chosen a quantitative method in the form of a questionnaire which is send to all the receivers of the manager letter.

Ternary codes for unequal error protection is a part of a communication system where different parts of the information to be transmitted can receive different amount of error protection. There are a lot of applications where the channel conditions fluctuate so that reliable or acceptable communication can not be guaranteed. Regardless whether the fluctuations of the channel are intentional or not the idea is to let the coderate decrease so that the error correcting capability can increase for the part of the information to be more protected. By using the support, the nonzero positions of the ternary code, a new binary code can be extracted with properties different from the ternary code in the sense of cardinality and minimum Hamming distance. When the channel conditions are good the receiver decodes the message using ternary decisions and receives all information included in the codeword.

This project consists of an adaptation, trial and evaluation of a model for practicing. Based on prior research I created a model aiming mainly to raise a musician?s self- awareness around the different parameters a performance consists of. An additional wish was for it to simultaneously assist the musician in monitoring his or her progress. With video recording and self-evaluation as the two main parts I tried the model by using it over a period of three months.

In this report a model was constructed in order to determine how a number of covariates influence the gross domestic product, GDP. The covariates were chosen depending on their expected influence on GDP, for example education and life expectancy. The data used in this report are collected from the World Bank. The model to describe GDP has been calculated using multiple line arregression. In order to reach a reliable final model the number of covariates has been gradually decreased to eliminate insignificant covariates.

AbstractHudiksvalls coordinating model - a model to make cooperation easierCamilla Andersson and Åsa GradinThe purpose of this study was to examine the experience each one of the administrators have of their own new model in Hudiksvall to make cooperation easier for the three different administrations in Hudiksvalls municipality. The study will focus on the administrators experiences of Hudiksvalls coordinating design. Questions of the study were: How is the influence of the model on the rules? How is the influence of the model on expectations and parts? What kind of influence did the model have on the responsibility distribution? What kind of influence has the model on the responsibilities at the transfer of costs? To answer the questions of the study we applied a qualitative method, it was made through a standardization interview guide and open questions, with six of the dealing officers who works with the model. Some of the results wich can be discern are by an economic character, andfor the clients that they won`t be passed around the administrations in the community, they get the right help, quick and safe.Key words: cooperation, coordination..

This report present a working model for simulation of what happens to colors displayed on screens when they are observed through optical filters. The results of the model can be used to visually, on one screen, simulate another screen with an applied optical filter. The model can also produce CIE color difference values for the simulated screen colors. The model is data driven and requires spectral measurements for at least the screen to be simulated and the physical filters that will be used. The model is divided into three separate modules or steps where each of the modules can be easily replaced by alternative implementations or solutions.