The project was performed at SiemensIndustry Drive Technologies with theobjective to provide actual values forthe energy savings potential withinSiemens scope of practice.In Sweden the electrical drives standfor about 30 % of the total electricityconsumption and about 60 % of theelectricity consumption within theindustry. During the pre-study phaseelectrical drives with pump applicationswere identified as large energy users.Because of this a case study at one ofSiemens customers, Stora Enso Fors wasperformed. The system that was evaluatedduring the case study was a throttledsystem with a centrifugal pump forpumping pulp.The results yielded that a saving ofover 50 % could be achieved by replacingthe throttle valve with a variable speeddrive, a frequency converter. Thepayback period was two years and twomonths and the present value for thetotal life cycle cost of the variablespeed system was 662.566 SEK lower thanfor the throttled system. As aconsequence, Stora Enso Fors is advisedto invest in a frequency converter forregulation of the system.The general conclusion is that a focuson system efficiency is the mostimportant factor in energy efficiencyprojects and that the system regulationmethod has a large impact on the overallsystem losses and hence its efficiency.Energy efficiency potential forthrottled systems with centrifugal pumpsis large and significant economicalsavings can be made through investmentswith short payback time..

Under tillverkningsprocessen i massa- och pappersindustrin bildas avloppsflöden i flera olika steg. Ett av de miljöbelastande utsläppen utgörs av organiskt material. Organiskt material kan mätas som biokemisk syreförbrukning (BOD), kemisk syreförbrukning (COD) eller som totalt organiskt kol (TOC). Analys av COD inkluderar ofta miljöfarliga ämnen (till exempel kvicksilver). Naturvårdsverket har under flera år aviserat att analysen kan komma att förbjudas och därmed blir analys av TOC allt mer vanligt.

In healthcare there is a rapid development towards introducing and implementing a wide range of information technology (IT) to aim for higher quality and more effective care. A common health information system (Cambio Cosmic) has been implemented in Landstinget Kronoberg. Clinical microsystems are the frontline units where staff and pa-tient meet. When the conditions in the microsystems are changed, it is interesting to de-scribe and analyse the consequences.The purpose of this study is to describe how health care staff uses a health information sys-tem and how they experience its functionality in their patient work. Initially, a literature re-view about the use of health information system was undertaken, followed by a qualitative case study based on interviews about how healthcare staff describes their reality.

Environmental issues are global problems and they are a major challenge for any successful organizational business worldwide. Many challenges and opportunities emerge during the certification process of an EMS. Therefore it is interesting to contribute in understanding these emerging problems during this process.The aim of this study is to explore how the environmental objectives could be achieved at preschools in Uppsala, investigate the perceived challenges and opportunities and to identify the outcome of implementing the ISO 14001, Green Flag at such set up.A qualitative method is used and three Green Flag certified preschools, affiliated to the Uppsala Municipality and located at different geographical location were selected. A structured interview with the environmental representatives from the preschools and the municipality was completed. The so-called PDCA-cycle as a method of evaluating sustainable development and analysing the imperial data is used.The study showed that environmental certification constitutes a great challenge for the municipality of Uppsala.

Life Cycle Assesment, LCA, används för att sammanställa och utvärdera in- och utflöden ur ett system samt potentiell miljöpåverkan under en produkts livscykel. Beräkningarna görs genom att se hela produkten ur ett livscykelperspektiv, dvs. från det att produkten är en råvara till det att den hanteras som avfall. Beroende på måldefinition och systemgränser kan detaljgraden och tidsramen för LCA-studien varieras. LCA används för att identifiera möjligheter att förbättra produkten i olika delar av livscykeln ur miljösynpunkt men också för att jämföra olika system.Syftet med denna rapport är att öka förståelsen för hur förbättringar ur miljösynpunkt kan åstadkommas i produktionskedjan för de tre golvmaterialen parkett, linoleum och vinylgolv samt undersöka om och på vilket sätt LCA metoden kan bidra till detta.Metoden som har använts är att använda livscykelperspektiv samt mjukvaruprogrammet GaBi med databasen Ecoinvent.Miljömärkning Sverige AB ska uppdatera sina golvkriterier och efterfrågar därför information om utsläppen av CO2, NOx, SOx och VOC samt energiåtgången hos de tre golvmaterialen vinyl, linoleum och parkett ur ett livscykelperspektiv.

TV- och mediabranschen drivs pa? av teknikutveckling och a?r under fo?ra?ndring da?r allt fler konsumenter va?ljer att konsumera video via internet vilket sta?ller krav pa? akto?rerna i TV-branschen. Traditionella TV-operato?rer fo?rso?ker fo?ra?ndra sina affa?rsmodeller, branschgra?nser blir mer otydliga da?r bolag som tidigare ansvarat fo?r it-infrastrukturen fo?rso?ker ta sto?rre del av va?rdekedjan, nystartade fo?retag ser sin chans att konkurrera samt globala akto?rer som Google och Apple blir allt sto?rre hot.Fo?r konsultbolag finns det i TV-branschen da?rfo?r mo?jligheter att fylla ett marknadsbehov av branschspecifik ra?dgivning och resurser fo?r att hja?lpa TV- akto?rerna med att anpassa sig till digitaliseringen. Konsultbolag som fo?rso?ker etablera sig inom TV- och mediamarknaden beho?ver ta sta?llning till fra?gesta?llningar som hur brett erbjudande de ska ha, vilka kompetenser och roller de ska erbjuda och hur de uppna?r en stark marknadsposition.

The main purpose with this study was to investigate whether the tree growth differs or not in prescribed burnt areas compared to mechanically scarified. Together with the result from the main purpose, answers of whether it's possible or not to combine nature conservation with tree production in prescribed burnt areas was presented. In these areas the regeneration were analyzed to see if there was enough tree plants to comply with the Swedish Forestry Act regulations terms for approved regeneration. A field survey was conducted at 6 objects, three objects for prescribed burning and three for mechanically scarification. All objects were planted within the same year.

A third party access to district heating networks has been proposed in Sweden, to increase the competition on the district heating market. Such third party access could create opportunities for the agricultural sector as an energy producer. This study describes the technical, economical and environmental prerequisites for a farmer cluster to build and run a heating plant, fueled with local wood fuel. The heating plant in the described scenario is 8 MW and will supply a village of 1000 houses, and is fueled with wood chips exclusively. Supplying a heating plant with fuel puts high demands on the logistics, since there need to be a continuous flow of fuel. In the scenario, wood residues from felling and thinning is stored in stacks in the forest, and a few times a year chipped and transported to a storage area at the heating plant. In the study, an estimation of the profitability has been made by estimating the cost of the investment, personnel, operating and maintenance costs and costs for the fuel and ash handling.

Researchers, planners, and government agencies agree that road safety for children must be a priority and in particular that children should have a safe and secure way to travel to and from school regardless of age or the distance travelled. In Sweden, child traffic safety is a key part of the country?s Nollvision, a long-term traffic policy goal of ?no deaths or serious injuries?. Unfortunately, many countries have recorded increases in child traffic accidents as the percentage of parents who drive their children to school and thus congestion around schools has increased. Common strategies include traffic safety education for children, the redesign and improvement of traffic infrastructure, bicycle training, and carpooling.This thesis assesses the traffic problem around Ludvigsberg School in the district Valbo in Gävle, Sweden.

The most common form of hair loss in young and old people is androgenic alopecia. Hereditary hair loss affects both men and women. Hereditary hair loss in some women begins at the age of 30, but as a rule hair loss begins in post-menopausal women. In women the hair thins out in an oval portion of the front part of the scalp. In men, hair loss can start as early as at the age of 20.

Life Cycle Assesment, LCA, används för att sammanställa och utvärdera in- och utflöden ur ett system samt potentiell miljöpåverkan under en produkts livscykel. Beräkningarna görs genom att se hela produkten ur ett livscykelperspektiv, dvs. från det att produkten är en råvara till det att den hanteras som avfall. Beroende på måldefinition och systemgränser kan detaljgraden och tidsramen för LCA-studien varieras. LCA används för att identifiera möjligheter att förbättra produkten i olika delar av livscykeln ur miljösynpunkt men också för att jämföra olika system.Syftet med denna rapport är att öka förståelsen för hur förbättringar ur miljösynpunkt kan åstadkommas i produktionskedjan för de tre golvmaterialen parkett, linoleum och vinylgolv samt undersöka om och på vilket sätt LCA metoden kan bidra till detta.Metoden som har använts är att använda livscykelperspektiv samt mjukvaruprogrammet GaBi med databasen Ecoinvent.Miljömärkning Sverige AB ska uppdatera sina golvkriterier och efterfrågar därför information om utsläppen av CO2, NOx, SOx och VOC samt energiåtgången hos de tre golvmaterialen vinyl, linoleum och parkett ur ett livscykelperspektiv.

Today every organization is committed to some kind of environmental scanning in order to get necessary knowledge of the world around them. The acquisition, organization and storage of information in combination with a strategic use, is today an important factor for a successful organisation in any sector of our society.In this Master thesis I have studied how an organisation such as The Confederation of Swedish Enterprise (Svenskt Näringsliv) handles its information resources. I have also looked at the flow of information within the organization. The Confederation of Swedish Enterprise is Sweden?s largest business federation representing 50 member organizations and 55 000 member companies.

Syftet med detta examensarbete är att ta reda på hur elevers uppfattningar om de rörelser som sker i vårt solsystem stämmer överens med de vetenskapliga fakta som finns. I våra vardagliga situationer refererar vi till det vi med ögats hjälp kan uppfatta i fråga om vad som rör sig eller ej. Hur påverkas eleverna av de dagliga uttryck som de får höra sedan de är mycket små, och har de en möjlighet att med skolans hjälp förändra dessa tankesätt?Undersökningen genomfördes med hjälp av kvalitativa intervjuer av elever i skolår 1 respektive 5. Detta för att se hur stor skillnaden är mellan de elever som inte har erhållit någon undervisning om solsystemet och de elever som ska ha uppnått de mål för fysik som skolverket har ställt upp.Eleverna som deltog i studien valdes slumpmässigt ur respektive klasser.

The agricultural sector has historically seen stable prices and a relatively constant demand for its products. Companies within the sector have generally had few loans and large sums of money tied in assets. The profitability of the companies has on the other hand been low. Together these circumstances have determined the creditors? demands on the companies within the sector and have formed the rules and regulations that exist today.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .