ABB Surge Arrestors in Ludvika have for a long time had a problem to keep the moisture at a steady state in the production of their ZnO-powder, that is used to produce varistors.Some black-box models of the spray drying process have been designed and evaluated to find a solution for the problem. After evaluating the collected data it has been found that variations in the supply voltage causes control difficulties for the operator. A cascade control system was designed, consisting of three PI control loops designed with lambda tuning. The disturbance in the supply voltagewas used as a feed forward in the control system.At the end of the project the control system was installed, and tests were made to verify the functionality of the regulator. It was shown that most of the variations in the moisture of the powder could be eliminated using small resources, through purchase of a process controller and four power meters.

Syftet med denna studie var att utifrån ett socialkonstruktionistiskt perspektiv och ett Foucault-inspirerat diskursanalytiskt ramverk visa på några av de sätt att tala om och förstå den bildterapeutiska processen som finns tillgängliga för och används av bildterapeuter. Syftet var även att beskriva hur dessa sätt att tala kan påverka bildterapeuter i det bildterapeutiska arbete de bedriver. Datainsamlingen genomfördes med semistrukturerade intervjuer med bildterapeuter. I resultatet lyftes tre distinkta sätt att tala om processen fram, som gav den tre olika innebörder. Dessa tre diskursiva konstruktioner framställde den bildterapeutiska processen som en blottläggande process, som en experimenterande process och som en reflekterande process.

The purpose of this investigation is to show how politicians state primary goals and how they break them down into secondary objectives within the sector of Child-and education area. This is supposed to create a general image on how the targeting process is handled within the public activity. Finally, this will lead us to what is necessary for the targeting process to work successfully within the public activity.  We have implemented a qualitative study within the two chosen municipalities. This case study is based on personal interviews that are conducted through semi structured questions.

Abstract This thesis is based on a case study of the drawn out legal process on the question of establish a limestone quarry in Bunge Ducker in north Gotland (Sweden). The current fields are located next to areas that are protected by virtue of being EU-certified Natura 2000-areas. Despite this, the Swedish governments and courts have not agreed in witch national interest that should be prevail when decisions are made on this issue. This phenomenon are reflected in the judicial process and different court have evaluate information differently in the case. A change among governmental actors where priority is given to the importance of national interest have occur in the later part in the process.

Pressure ulcers cause a lot of patients unnecessary suffering. This suffering could be decreased through improved knowledge about prevention, so that pressure ulcer will not appear. The purpose with this review was to study how nurses assess risk and prevent pressure ulcer, and to study how nurses use available knowledge. The method consisted of searches in databases and searching trough references. Our result is based on ten articles, qualitative, quantitative and reviews.

Participation, public art and participatory public art as phenomenons and subjects have been studied and discussed. With interviews and observations as a base, we have studied projects and discussed participation, effect and quality in relation to these. Furthermore we have looked at how the participatory art processes work in Sweden and England. This essay seeks to discuss the process of participatory public art and to emphasize the elements contributing to the quality of this process. It is up to us as planners to recognize the possibilities for a qualitative place. To mediate between different interests, for example between politicians and stakeholders, between economics and quality, between the place and its users, between individuals and the community, and in our case between artists, users and the municipality. Public art has gone from being about the product, an art piece, to becoming more of a process, from non interactive to interactive. Participation ranges from receiving information to play an active part in the process. Four cases have been studied, taken both from Sweden and England, showing the diversity of processes connected to Participatory Public Art. From interviews conducted in Sweden and England information and thoughts have been received and they show a higher degree of use of participatory public art in England, and also a higher consciousness.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The purpose of this bachelor?s thesis is to examine video games, gamers and gaming from an information science perspective. The purpose of the study is partly to study video games as a type of information system and partly to study gamers information use, information seeking and also the experience of gaming. A selection of five games have been analysed using a topology for video game analysis created by Espen Aarseth. A quantitative investigation has also been made, in the form of a web survey distributed through four Swedish online forums, the result of which was analysed using Carol Collier Kuhlthaus model of the information seeking process.

The Intensive Care Unit (ICU) is a special unit for patients who is in the need for emergency life-sustaining measures and every patient has complex medical- technical equipment. The experiences of a critical illness and the needs of critical care are experienced in different ways. The purpose of this study was to describe the experiences from patients in the ICU and how this experience has an influence on the patients. The method was a study of literature with a qualitative inception based on eight scientific articles and the analysis of content has been inspired by Graneheim and Lundman (2003). The result of the study is presented by four categories: to loose the ability to make themselves understood, to be forced to adjust to the environment of caring, to have the lack of connection with reality and to be in an intensive care environment, The results showed that patients in the ICU are affected by the attitude from the staff, the equipment around them as well as the sounds and lights in the environment there.

This thesis is carried out at Portsystem 2000 AB who manufactures and markets industrial doors and docking systems. The background to this thesis is that the company?s management considers that their follow-up process of cost accounts is not fully functioning.The aim with this report is to investigate and describe the present procedure of the follow-up process concerning the time of operations and come up with suggestions for improvements. This thesis is performed within the range of the following areas: Information systems, quality, processes and cost calculation. The main method we used were semi structured interviews with a fairly opened framework.

Sandvik Wire needed a review of the administrative part of the order fulfillment process and especially the work around packing and the inventory of finished goods. Therefore we acquired the assignment to investigate the administrative part of the order fulfillment process in the company with the purpose to identify potential for improvement. This investigation was performed with focus on the terminal and packing functions. The purpose with the investigation was also to identify critical factors for an efficient order fulfillment process and investigate if information quality is such a factor.Data was collected through interviews and observations on Sandvik Wire. With the help of this data the information and material flows was mapped, the work within terminal and packing, and adjacent functions was investigated.

In the next few years the pollutants loading at the Slottshagen wastewater treatment plant in Norrköping is going to increase due to the reason that one of the waste water treatment plant in the district will be shut down.A survey of how these different pollutants are divided in the treatment process is therefore necessary for mapping out both the loading and treatment efficiency.This can be achieved by studying mass balances.Mass balances were carried out for the water treatment process for the mechanical/chemical,biological and the chemical stage.The mass balance studies show that the treatment efficiency was very good. However in order for the mass balances to be quite consistent and to ensure complete coverage of results and conclusions i.e. more reliable results, sludge samples should be collected and taken at different times per day and the influent rate should be investigated.In this work mass balance has been set up in order to illustrate and identify the factors that should be considered and taken care of for further estimation using mass balances in the future. Furthermore this survey results in a calculating model for the mass balances at thisplant.This calculating model is used as a tool to facilitate future calculations for mass balances for the water treatment process at Slottshagens wastewater treatment plant.Moreover it provides a basis for carrying out further estimation of the treatment process in the near future.In this project the importance of some operating parameters was also taken in consideration.This calculating model can be modified so that calculations of such operating parameters i.e. sludge loading and sludge age can be easily performed.Such information can be used further to evaluate different operation alternative in order to ensure an optimal use of the treatment process with in the plant..

The current debate regarding organizational strategies for sustainabledevelopment is influenced by the theory of global governance. Decentralizedstructures of the global society are taken to use in the realization of a sustainabledevelopment. New roles of transnational networks and partnerships raisesquestions of the ability of global governance to co-ordinate and implement longtermsolutions without assistance from centralized and hierarchic structures basedon government. The aim for this thesis is to illustrate the current conditions forwell-functioning networks of sustainable development and examine therelationship between global governance and government. Issues of participation,decision making and compliance are examined by a case study of the Marrakechprocess, a global process to support the implementation of sustainableconsumption and production.

Purpose ? The purpose with this thesis is to examine how items can be distributed between stores inventory and an external warehouse. To achieve the purpose criteria that should be considered, how these can be prioritized and used when distributing items between stores inventory and an external warehouse will be examined.Method ? The study started by an examination of the theory that already exists within the subject. The already existing theory has then been examined in reality, on the furniture company IKEA Jönköping, where a case study with one channel has been performed.

The thesis has investigated how Sandvik Coromant could implement the SMED principle on one of their grinders groups and what improvements it would lead to. The aim of the thesis is to identify the current situation and investigate how their setup times would be affected by SMED. The work initiated with a literature analysis about the SMED principles and then proceeded with an analysis of the current situation where the activity was time mapped. The analysis consisted of time trials of the process that the thesis would include. The time studies revealed opportunities for structural improvements to create environment for a more structured process.