Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.

During the last few years the alcohol consumption has increased and is now the highest in 100 years, one usually count that 10 % of the grown up population abuse alcohol and/or drugs and most of them are hidden abusers with families and work. This leads to great costs for the companies. But the much greater cost for the companies are the much larger group of risk abusers. According to the Swedish law the employer has a responsibility for the work milieu and also for the rehabilitate for the employed and drug/alcohol abuse applies to this.I have done qualitative interviews on four companies in the south of Sweden with one representa-tive for the management and one representative for the union. I have investigated their attitudes to alcohol and drugs and how they describe the alcohol culture at the company.The companies define alcohol problems when they are established and obvious and when it is dis-covered they put in resources and because of this they don't work preventive so much.

Bakgrund: Svenska banker och försäkringsbolag spenderar stora summor och resurser på sina IT-system, vilka oftast sköts internt. IT-kostnaderna utgör för banker den näst största kostnadsposten i resultaträkningen och därmed utgör över 20 procent av den totala kostnadsmassan. Marginalerna inom bank och försäkringsbolag minskar i Sverige samtidigt som ITs komplexitet ökar med krav på integrering medgamla bank- och försäkringssystem. IT-outsourcing och joint venture med ett IT-företag är vanliga organiserings former och inget nytt fenomen i Finland inom bank och försäkringsbolag. IT-outsourcing har både för- och nackdelar.

The background to this study is to find alternative ways of size rationalization. My vision is to take the basic conditions and make the best and most profitable of them. I have chosen press of rape oil because it?s interesting and the investment to get started is relative small. The opportunity to use outmoded and unrational buildings which often are found at many farms to something that gives money instead of costs money is also an argument.

Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.

GNT Group is a Nordic/Baltic wholesaler that distributes products in the IT, entertainment and home electronics sector. GNT is facing problems with inaccurate inventory levels which can lead to unnecessarily high inventory carrying costs or lost sales. Currently the decisions about when and how many to order are made somewhat arbitrarily by the responsible personnel. Their decisions are based only on some brief sales history and on experience. GNT wants to develop its ERP system to be able to support the purchaser in these and other related decisions.

Värmekollektor in Sunne is a company whose main occupation is to collect the gas produced inlandfills. The gas contains about 50 % of Methane which is a greenhouse gas 20 times worse than CO2and should therefore not be allowed to leak into the atmosphere. The Methane is in as large amount aspossible used in different plants for example heating of households. But there are occasions when aflare is needed to burn the excess gas at standstills or testing of new landfills. The Flare only burns themethane to reduce the hazarder?s effect of the environment, it does not take advantage of the energy inthe gasThe goal of this master thesis was for me to create a foundation for an in-house production offlares for Värmekollektor.

The aim of this master thesis is to investigate the development on the Swedish book market for the beginning of the 21st century. During the 21st century a lot of things have happened on the Swedish market for library books. Twenty years ago in reality only one company existed that could deliver books with the demanded equipment to the libraries, but in year 2010 there are four companies offering the same service. Other news during this time is bookshops on internet. We found this development interesting and therefore decided to contact the four companies as well as six libraries to find out what they thought of the new situation.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

Calesco Foil AB is a manufacturer of thin flexible circuits for heating or electric conduction.The plant is located in Kolbäck, Sweden.One of the company?s products, the conducting polymer pasta is in present situationunpredictable. Unpredictable in the way that the same type of heater shows differentresistance, depending on which time they have been produced. The desired repetitivelyprocess is almost non-existing.The aim of this master thesis is to primary identify those parameters that effects theresistance, observe and if possible to perform tests on them. The results from this analysisstand as base for recommendations to achieve a repetitive and standardized printing process.The results and the observations from the tests indicate that a repetitive process is possible toachieve.

People in refuge face states with a dilemma. This dilemma consists of a wish (or obligation) to help those who need a refuge, and at the same time consider domestic issues such as financial costs and security problems. Thus, there are two perspectives which are important to consider when refugee policies are made. The aim of this paper is to see which perspective the EU had when making their migration policies. The question asked is: which perspective is behind the making of European refugee policy?The theories realism and idealism are used to describe the conflicts in the making of European refugee policies.

Organisationsledningar kan oftast bli för bundna av ekonomiska siffror vid sin styrning. För att det ekonomiska beroendet skulle kunna minska, grundades en styrmodell som kan användas för att ledningen ska kunna styra organisationen ur flera olika perspektiv. Styrmodellen kallas Balanced Score Card (BSC) och grundades i början av 1990-talet av professorn Robert Kaplan och konsulten David Norton. Styrningsmodellen BSC kan enligt förespråkare användas i olika verksamheter, däribland offentliga verksamheter.Vårt huvudsyfte är att belysa motivet för adoptering och tillämpning av BSC på SÄS. Ett annat syfte är att undersöka användningen av BSC på sjukhuset.Metoden som vi har valt att genomföra vår studie på är en fallstudie eftersom vi inom studien har koncentrerat oss på en organisation och hur den använder sig av BSC.

This thesis has been carried out onbehalf of Lindborg & Sons in Örsundsbroand is a concluding part of the Bachelorof Science program in ConstructionEngineering at Uppsala University. Theaim of the project is to make a plea fora database of good examples of themachine room types using Revit drawingprogram, and work out a correspondingworksheet .At the start of the process it becameapparent that there were somedifficulties in using Revit to creatingmachine room types of the variety whichthe company builds. For modelling ofoblique, curved and irregular lines, Ihad to use my AutoCAD Architecture andthen import them into Revit.The creation of calculus in Excel wastime consuming. On the other hand, it isa one-time work to create the template.The advantage of Excel is that there isno need for a re-calculation at the costof various types of machine hall. Allthat is needed is to replace the variousparameters.

This report is the final step in the Bachelor of Science program in Building Construction Engineering, Department of Engineering Sciences, Uppsala University.The purpose of this study is to highlight the difficulties and possibilities that could involve the introduction of new energy efficient technologies and changing work around this technology. This study focuses on energy use at a construction site or other temporary workplace where so-called portacabins are in place to address the need for temporary facilities.The method for obtaining knowledge on the subject was mainly interviews with site managers working in Svevia AB's various activities. In conjunction with the interviews I visited construction sites and portacabins if it was possible.My most important suggestion to Svevia AB concerns a better organization in order to make poratacabins more efficient on energy and costs. The company should also evaluate and monitor the energy efficient portacabins that are in operation.Expected energy savings of new technology may not materialize if there are gaps in information, education, technical services and technical maintenance. It is very important to utilize the experiences of new technology.