Overall aim of this master?s thesis is to describe and identify perceived barriers in Swedish businesses within solar energy field and analyze, based on four theoretical viewpoints, how these barriers can be handled. In other words how can the barriers be overcome or eliminated to better succeed in the commercialization process? The method applied is qualitative in which data has been collected through phone interviews originated from seven Cleantech businesses which operate within solar energy. Furthermore this thesis has a descriptive- and an explorative purpose.

This paper discusses the advantages and disadvantages of using different benchmarking models to measure and compare the efficiency of Swedish gas distributors. It also discusses to which extent the results of a benchmarking study should influence the revenue-cap which will be implemented in the gas distribution sector in Sweden from year 2011. The discussion is based on arguments from both theory and practical applications of benchmarking. The results suggest that benchmarking Swedish gas distributors against distributors in another country using a parametric model is most favorable, but the reliability will be increased if non-parametric models are used also. Partial and total productivity measures could be used to confirm results of other benchmarking analyses.

Mastitis is the most common disease of dairy cows. Mastitis can be painful for the dairy cow and causes economical losses for the farmer. These losses are due to decreased milk production, more working hours for the farmer, treatment costs and possible costs due to culling of the cow. The udder inflammation, mastitis, is often caused by bacteria infection. One of the most common bacteria found to cause mastitis in Sweden is Staphylococcus aureus (S.

Allt fler företag har med tiden sett outsourcing som en lösning för att bli mer konkurrenskraftiga. Företag kan välja att outsourca kärnverksamheten och därmed ställs höga krav på leverantörerna och samarbetet. De frågor som uppsatsen söker svar på är: Vilken betydelse har förtroende vid outsourcing av produktutveckling? Hur uppstår förtroendet? Undersökningen avser att analysera hur förtroendet för leverantören påverkar outsourcingen av produktutveckling. Genom att diskutera förhållandet mellan förtroende och transaktionskostnader kommer dessa faktorers betydelse för samarbetet mellan kund och leverantör att presenteras.

This thesis aims to investigate SAAB AB´s possibilities to use synthetic instruments in their test systems. The reason for this is reducing costs and the risk of obsolescence which is common when test systems operate for several decades.The market around synthetic instruments has been explored in the search for suitable hardware and software. Software has been developed in LabVIEW and synthetic instruments have been created with the help of IVI-drivers. The hardware consisted of PXI-instruments (Waveform generator and Digitizer), connected to a computer using a fiber optic link and PXI-chassi. The created instruments was then compared to common instruments used today, and the comparison turned out well.

The use of ERP in organisations is very popular and many companies have embraced this paradigm without really questioning why. Problems therefore often arise and cause high costs which is a result of poor planning. The paradigm also has its origin in the traditional architectural design that creates a system that has difficulties to adapt to organizations that are constantly evolving. The purpose of this study is to provide a different view of how IT-systems can operate within an organization and show how standard systems can be structured. We emanated from a case study at Linköping University Library, where we studied the implementation and integration of a standard system called Symphony.

The problems caused by the current engine casing in aluminum for Volvo Buses Corp. are the mainfoundation for this degree project. Lack of maintenance combined with a construction poorlyadjusted for assembly has resulted in the fact that the engine casings rarely get reassembled whenthe service is completed.The degree project has mainly been following ?Olssons. F, Principkonstruktion, Compendium, Lund?and ?Olssons.

The Thesis purpose is in the context of system development validate the Scrum Methodology. Projects concerning information technology are difficult to manage and tend to fail in quality, time or costs. Scrum presents a new view of the system development. Better cooperation between customers and developers, continuous follow-up on daily basis and extensive communication in the development team are all characteristics of Scrum. Scrum is described as a new paradigm by its founders but has been criticized by experts of system development too.

The purpose of this report is to compile and examine the cost of renovation of moisture-damaged bathrooms, to derive a target price. The target price can then be used by insurance companies to estimate the ultimate cost of future bathroom renovations.       The method is based on the compilation and comparison of the cost of repairs of previous water damage in bathrooms. The calculations compiled based on repair estimates for different insurance losses from one of the leading insurance companies in Sweden.       The result shows the average price per square meter of floor area for different sizes of bathrooms. The average price is the basis for the estimate of future renovation costs of bathrooms. The results further show that the bathroom finishes, area and the distance between the entrepreneur and the location of the renovation have great impact on the final repairing cost.

Syftet med denna uppsats är att undersöka om det finns byteskostnader på den svenska bankmarknaden. Shy (2002) har utvecklat en metod för att estimera byteskostnader på olika marknader. Shys modell kommer att användas för att estimera byteskostnaderna på den svenska bankmarknaden. Resultatet visar att storbankerna, överlag, har högre priser och högre byteskostnader än nischbankerna. Resultatet är rimligt eftersom storbankerna erbjuder ett större produktsortiment och större möjlighet till personlig service, vilket borde innebära högre priser för deras kunder.

Today?s electrical grid companies understand that better knowledge of and information about their grid can help realize a smart grid network. One way to gain better knowledge and information about the low voltage network is to install measuring equipment on the substation transformer´s secondary low voltage side that measures the low voltage network losses for that specific substation. By doing so, grid companies can, due to the calculation of the low voltage network losses, identify and address issues such as illegal power dissipation, unmeasured power outtakes, and unsatisfied technical documentation for the substations low voltage network.During 2012, Mälarenergi Elnät AB had a total electrical network loss (both medium and low voltage network losses included) of three to four percent of their total distributed electrical volume. Converting this energy volume into a monetary figure this accounts for a loss of around 30 million Swedish crowns.

The Vaxholm conflict was initiated when the Swedish Trade Union for Construction Workers shut down a construction site in order to prevent a Latvian construction company to build a school after the two parties had failed to agree upon a collective agreement in compliance with Swedish regulations. An emotional public debate followed that resulted in a discussion of the proposal for the Services Directive of the EU, based upon the country-of-origin principle. In this thesis we will analyze whether the country-of-origin principle or the country-of-destination principle is best suited to capture the gains-of-trade that the common market hoards and improve welfare within the EU. We conclude that the country-of-origin principle is the more apt of the two, though it leads to some short-run costs such as structural unemployment. But these will be more than outweighed by the gains in aggregate welfare for the EU in the long run..

In Sweden plans to build high speed railways have been around since the early 1990s and the planshave developed to be more precised since. The future Swedish high-speed rail network is supposedto consist of two lines. Götalandsbanan; from Stockholm to Gothenburg, and Europabanan fromJönköping through the Öresund Region to Hamburg.The description of the aim to build high-speed railways in Sweden has in former reports always beento achieve rapid passenger traffic between big Scandinavian cities and Europe. There are almostnothing mentioned about the possibilities of high-speed transports of cargo on these railways. Thisstudy aims to clarify the freight transport market for Götalandsbanan and Europabanan.Today there is only one transport system with high-speed freight trains.

AbstractHudiksvalls coordinating model - a model to make cooperation easierCamilla Andersson and Åsa GradinThe purpose of this study was to examine the experience each one of the administrators have of their own new model in Hudiksvall to make cooperation easier for the three different administrations in Hudiksvalls municipality. The study will focus on the administrators experiences of Hudiksvalls coordinating design. Questions of the study were: How is the influence of the model on the rules? How is the influence of the model on expectations and parts? What kind of influence did the model have on the responsibility distribution? What kind of influence has the model on the responsibilities at the transfer of costs? To answer the questions of the study we applied a qualitative method, it was made through a standardization interview guide and open questions, with six of the dealing officers who works with the model. Some of the results wich can be discern are by an economic character, andfor the clients that they won`t be passed around the administrations in the community, they get the right help, quick and safe.Key words: cooperation, coordination..

This project includes development of new packaging for dry spices and an investigation of how to automate the production line. The preliminary investigations show needs of an environmental friendly packaging possible to re-close. After screening for suitable materials three concepts were developed, a stand-up pouch, a plastic jar and a metal can. The pouch was excluded in a concept choosing process. In this process it was also decided to further develop the metal can concept.