In Sweden more than 400 000 private households have not yet sufficient wastewater purification. These effluent is considered as an increasing problem and many onsite purification methods have been studied. In this investigation, the method of reactive bed filters have been tested by column and batch experiments. Five different kinds of filter materials with reactive surfaces have been studied concerning their capacity to absorb ammonium and phosphorus from wastewater. The materials that were examined are Filtra N, wollastonite Filtra P, blast furnace slag and Polonite®.

This is an essay concerning the density of the city. An increasing amount of today?s cities have a shortage of space available for the erection of new buildings and settlements, especially in areas close to the city-centre. New buildings and settlements are therefore often found in the outskirts of the city, resulting in long distances between work and living for many people. These long distances are a waste of limited resources and are inconsistent with the vision of the sustainable city.The challenge for the future is to insert new buildings and settlements in the existing city-structure and in this way reduce the distances between different city-functions.The density of the city can be increased in two different ways; by inserting new buildings between existing ones or by extension existing buildings, for example by an additional floor.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.

Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.

The production of ferrochromium alloys at Vargön Alloys AB contributes to formation of unwanted ferrochromium dust, which contains toxic Cr(VI). The dust is since summer 2005 treated with an iron-sulphate solution to reduce Cr(VI) to the non-toxic Cr(III). A year later the treatment technique was improved and disposal occurs in cells on the landfill. The cells can be up to 300 m3 and the edges can be made out of fro example concrete. Tests are conducted on the treated dust when it is disposed.

Soils in a metal contaminated site on Stångberget in Gusum in southeastSweden were investigated and compared to relatively unaffected soils a fewkilometres away. Pollution came from historical release of untreated flue gasesfrom a brass mill. The objective was to find information on how high the metalconcentrations are, if metals from the polluted soil affect the surroundings andif the metal contamination affects the microbial community. The soil wasinvestigated using several different methods, such as field XRF measurements,chemical analysis of metal, carbon and nitrogen content, pH, acid neutralizingcapacity, texture, soil depth, field leach tests, sequential extraction and microbialfunctional profiles. The study showed that copper and zinc concentrationswere above Swedish Environmental Protection Agency guidelines for lesssensitive land use on the entire investigated area.

Dental implants that are integrated into the jaw bones are widely used to replace lost teeth in human beings. Tooth-loss is often related to loss of the surrounding alveolar bone. This can make implant placement difficult and a bone substituting material may be required. The standard method is to use a bone graft harvested from the patient which requires additional surgery than that needed for implant placement. Limitations in the amount of bone that can be harvested also pose a problem.

In the beginning of the 1860s, an important railway was built between Malmö and Stockholm. The railway became one of the most important projects that would influence the entire southern Sweden. The railway line was located to areas outside the ordinary routes and a number of communities were built up along its way.Älmhult was one of the communities that was built up due to the railway. In the beginning there were only a few farms and a station, but a community developed and the village grew. In 1901 the village became a small market town, which was an important event.

ur society is today in a phase of development in environmental and sustainable thinking. Alarming reports show changes in climate caused by our load and exhaust of resources. The energy usage contributes to a big part of it, by its emission of carbon dioxide. The built environment uses around 40 % of the total energy consumption in Sweden and requests to strongly reduce it are presented from both EU and national level.This thesis brings up the subject of green building with a focus on how we can create more energy efficient buildings in projects of new construction. Since the construction industry today often fails to pass on the knowledge between different projects, as a return of experiences, the construction company Skanska suggested the topic for this thesis.

Social capital is a relatively new concept that has received considerable attention in various community branches. The concept relates to people?s contact and relationship with each other, where their social network is seen as a resource. An extensive network of contacts and trust between people often go hand in hand. People with high social capital have high trust in their fellow human beings and vice versa.

AbstractTitle: Den mångtydiga svenskheten: En studie av det svensk-amerikanska föreningslivet i Kalifornien utifrån en etnisk aspekt 1910 & 1915. (The multiplicity of Swedishness: A study of the Swedish-American society?s associations in California from an ethnic point of wiew 1910 & 1915.Author: Joakim FranssonMaster Thesis in History (10p)Växjö UniversityThe purpose of this thesis is to examine the Swedish-American associations in San Francisco and Los Angeles and how they withheld or/and formed a Swedish or American ethnic identity. The primary source for obtaining that objective is the newspapers Vestkusten and California Veckoblad were the announcements from the associations are analysed. The thesis main questions are as following: Which ethnic aspects appears in the announcements from the Swedish-American associations in the newspapers Vestkusten and California Veckoblad 1910 and 1915? And What similarities and differences in the ethnic expressions appears in the primary sources during these periods?The conclusions can be briefed as there was a great variety of Swedish-American associations during the examined periods, there was a frequent occurrence in both religious and secular movements.

The housing sector uses 40 % of the energy in Sweden and half of the electricity usage. Theuse of energy is the main reason to the increasing rate of carbon dioxide in the atmosphere.This is the main motive but also a wish of higher safety, that is a higher rate of selfsufficientenergy production in Sweden, we want to decrease the need of using fossil fuel. Now whenthe energy price rise, the interest in energy issues increase and more people discuss thepossibility of reducing the usage of fossil fuel. A change to renewable energy such as sun,wind and water is the only solution where we can get a sustainable development.One way to contribute to a better use of energy is to build in the principle of passive house.The house is being built with a thick and tight insulation. If you use a heat-exchanger withhigh degree of efficiency and a final heating battery on the ventilation system, the heat fromlamps, devices and the ones living in the house should be enough to fulfil the criteria ofliving.

Cement manufacture accounts for 3-5 percent of total global carbon emissions. There is a growing interest in reducing the environmental impact and conserve limited natural resources. In cement production, clinker productions consume 87.5 percent of the total energy consumed in the cement manufacture.Cementa has since many years, focused on reducing the environmental impact of cement production. The work has involved the entire production process from selection of alternative fuels to the development of cement with less clinker content. During 2013/2014, two new types of cement (Bascement and CEM II / B) will be introduced to the Swedish market.

The purpose of this essay is to acquire variables that explain and may be used as a base for wage estimation in the private sector in Sweden. The factors that are assumed to have an impact on wage estimation are based on earlier Swedish and international studies. Business survey data, which is based upon monthly questions to firms in various sectors of the Swedish economy posed by the Swedish National Institute of Economic Research, will be analyzed to find out weather they have an impact on Swedish wage settings or not. Tests including business survey data are yet rarely frequent, why this essay will be some kind of a pioneer within the area. To estimate significant factors that influence wage setting in Sweden, three different wage equations have been modeled and tested with a regression model.

This master thesis examines commercial video games and their relation to the concept of immersion and realism. Games as a communicative medium is quite a new area of interest within rhetorical research in Sweden. Most of the research conducted has, however, been focused on gaming and formation on opinion ? games that explicitly tries to persuade the player, unlike commercial games that focus on entertainment, that is. But that does not mean that commercial games cannot influence us.