Renewable energy and the charging of electrical vehicles will increase in the future. Therefore the risk of outages is also increasing, partly because renewable energy is intermittent and the production amount can change fast. Charging electrical vehicles is often demanding high effect in short time, which could make faults occur. It takes more advanced technology to short the outage time. Today Övik Energi has high reliability in the power grid, but in order to maintain the reliability, it is time to prevent problems that can occur in the future. This thesis has presented a suggestion for the placement of fault detectors Protrol IPS2, in which a total of four detectors is proposed.

This paper deals with the opportunities for the technique of condensation, for wood fired household heaters, on the Swedish market. In this project the condenser is preceded by a scrubber and both energy exchange and separation of unburnt particles have been studied. The facility studied is connected to a wood stove at 30 kW. The tests would show that the effect from the stove never reached above 16 kW. This might be a result of the low temperature of the water going into the stove, from the condenser. In addition to this the wood was not of highest quality and the stove could have needed some maintenance before the tests.

The North-American sociologist Michael Lipsky has characterized social workers as street-level bureaucrats with a substantial discretion in the relationship between the welfare state and its citizens. Within Lipsky´s theoretical framework social workers appear as a powerful group that socializes the citizens to uphold certain expectations towards the welfare state and its (re)distributional programs. From this point of view, it is important to learn more about social workers and the attitudes they express towards the welfare state. The aim of this study is to analyze how the welfare-political attitudes of future social workers are affected by their social background (e.g. class background and ancestral homeland).

Alternative splicing is a process that partly rejects the common definition of a gene ? that one gene codes for one specific protein. By variable combination of coding regions (exons) and exclusion of non-coding regions (introns), formation of several different mRNA-transcripts, and consequently several different proteins, can derive from the same gene. Alternative splicing is an important condition for the development of complex life forms, but it is also a highly sensitive process and inaccurate splicing is the cause of approximately 15 % of mutations that cause genetic diseases. This article presents four genes, BRCA1, BRCA2, ER? and ER?, and inaccurate splicing of these genes increases the risk of developing cancer, particularly breast cancer and ovarian cancer.

Steel is an excellent material to build with, but consideration must be given to the fact that unprotected steel corrodes, rusts, therefore, as a rule, the steel must be protected in some way. This can be done by reducing the tendency of the steel to corrode by using stainless steel or by treating the steel with a protection method. The two most common methods of protection are corrosion protection paint and zinc coating. To determine the method, the corrosive category must first be evaluated and this is done in accordance to EN ISO 12944-2:1998.Stainless steel is available in many varieties but only some of them have properties that make them suitable for use as construction steels. There are many factors to be considered in the design of stainless steel to prevent corrosion from occurring.

This essay focuses on Finnish immigrants living in Sweden and their experiences of educationof literature in Swedish upper secondary school. It concerns the fact of how education ofliterature can be used to strengthen students? formation of cultural identity. The essay tries toidentify obstacles as well as possibilities in the teaching of literature with a view to deepenand enrich this process. The method consists of a phenomenological approach includinginterviews with a group of Finnish immigrants living in Sweden.

This study in Environmental Science examines the amendment of the EU-Directive on. Greenhouse gas emission allowance trading. The Directive is to be considered as a tool for fulfilling the obligations that the Union and its member countries have taken on through the 1997 Kyoto agreement together with the protocols proposed at that time. The flexible mechanisms of the protocol are intended as instruments for limiting the climatic changes arising from anthropogenic sources, emission allowance trading being one of these mechanisms. The results presented here consist primarily of an analysis of interviews with various experts in the field of emission control concerning the possibilities and problems attending the process of implementation.

Background: The last few years a globalization of the capital market has occurred. This have led to that it is more important for the companies that their financial information can be compared with other companies in order to compete on same grounds. In order to fa-cilitate for the companies within EU to compete with other companies and in order to strive for an internal market EU decided that IFRS should be used by all listed companies within the union.Problem: In 2006 the first financial reports according to IFRS will be published, and then it will be interesting to investigate how the companies have chosen to communicate the transition to its stakeholders. According to IFRS some information is compulsive but the companies have chosen to disclose voluntary information to a different degree.Purpose: The purpose of this study is to describe to what extent the Swedish listed com-panies have reported the transition to IFRS in their consolidated financial statements.Method: In this essay a quantitative method have been chosen in order to find general re-lations. The data collection is done with help of an evaluation model that have been devel-oped for this study.

The aim of this Master?s thesis is to present guidelines for making a digital repository. To attain this, useful factors for creating an archive were examined. Also different organisations? strategies were analysed.

This thesis aims to illustrate how environmental impact can be reduced, through the use of lean concrete. It also illustrates how environmental data can be applied to a house through implementation with BIM. In this study a unique concrete structure developed by Swedish Cement and Concrete Research Institute is assessed for environmental impact, by calculating the carbon dioxide equivalents using LCA methodology. The construction is a sandwich element where the concrete is made ??up of three layers.

Many of todays studies show that district heating is one of the betteralternatives as heating source because of its low environmental load.The energy source is often leftovers from other processes producing energy or waste, like garbage or chips.Electricity in combination with geothermal heating is another heating system that has increased sharply during the last years, and also this system decreases the discharges that have negative affectson the environment compared to several other heating methods.This report aims to, concentrated towards these two different heating systems, estimate the amounts of discharges they indirect cause and how the environment is affected.We have calculated the mean value for discharges of carbon dioxide, nitrogen oxide, sulphur oxide and dust generated from electrical power used in Sweden.Through interviews and research we have gained data for the same substances that district heating based on combustion of garbage and biofuel generates.We have also in cooperation with a housing company chosen a building we see representative for many of the new single-family houses built in Sweden today.Based on its shape and appearance we theoretically created three alternatives of the same house, each of them with climate screens different from each other.Together with the amounts of discharged environmental affecting substances, these houses were the base for our calculations and studies when investigating the different heating sources environmental effect.The results have thereafter been analyzed and discussed from different angles..

This project was aimed to study the degradation of polystyrene-butadiene-styrene block copolymer (SBS). SBS is used to modify bitumen, the binder in asphalt. From earlier studies it is known that SBS degrades in bitumen, but the degradation products have not been identified. To be able to determine the long term effects of SBS in the environment, degradation products need to be identified. Polystyrene forms rigid blocks with polybutadiene as a rubbery matrix between the ridgid blocks.

Mammary gland neoplasia is one of the most common diseases in the bitch and the most common neoplastic disease. More than 13 % of the female dog population in Sweden suffers from mammary tumors during their lifetime. The disease can affect bitches in all ages but most often middle aged and older dogs. Some breeds such as Poodle and English Setter are predisposed for the disease. The aim of this study was to evaluate if it is possible to improve the post surgical healing process by using a pressure pad.

Det framgår av en mängd opinionsundersökningar att vi svenskar ser oss som miljömedvetna. Ett sätt att värna om miljön är att källsortera. I kvarteret Topasen 1&2 i Norrköping har det införts källsortering i miljörum på gården men möjligheten att använda sopnedkasten finns kvar. I denna uppsats undersöks med hjälp av intervjuer och en enkät vad som styr de boendes val av sopsystem samt hur hyresgästerna påverkas av att kunna välja. Uppsatsen syftar till att undersöka om de boende i området gör så mycket för miljön som de tycker att de borde göra samt om deras beteende stämmer överens med vad de säger att de gör.

Detta examensarbete har utförts på uppdrag av Koenigsegg Automotive AB, som utvecklar, tillverkar och säljer högpresterande sportbilar. Företaget erbjuder fälgar tillverkade helt i kolfiberkomposit, som ger betydande viktbesparingar i jämförelse med traditionella metallfälgar.Efter tillverkningen kräver fälgarna viss bearbetning vid anläggningsytan mellan fälg och däck. Syftet med examensarbetet har varit att undersöka möjligheten att utföra bearbetningen av fälgarna in-house i Ängelholm, och målet har varit att konstruera en maskin för detta ändamål.Projektet inleddes med en litteratursökning, där svårigheter och möjligheter gällande bearbetning av kolfiberkompositer undersöktes. Till följd av de undersökningar som gjordes, valdes bearbetningsmetoden svarvfräsning och ett antal konstuktionskoncept genererades. Genom ett antal utvärderingar utvecklades ett speciellt koncept vidare till ett komplett produktförslag.Produktförslaget är komplett med analyser, beräkningar samt tillverkningsunderlag, som ger uppdragsgivaren bättre insikt i sina möjligheter.