Carbon dioxide in the atmosphere contributes to the greenhouse effect, which is essential tolife on our planet. Furthermore, it plays an important part of the photosynthesis andrespiration of the world?s organisms. Since the start of the industrial revolution the amount ofcarbon dioxide in the atmosphere has increased exponentially. The main source is theextensive burning of fossil fuels.

Students? performance in school is dependent on the indoor climate. This report studies four schools regarding air quality and thermal environment. A survey was made at the schools as well as measurements of carbon dioxide, dampness, thermal climate and, as an indicator for the furniture?s capability to collect dust, shelf factor and fleece factor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

Phosphorus (P) is an essential nutrient but a surplus could lead to eutrophication. Furthermore, the minerals used to produce the mineral phosphate is a non renewable resource. There are in other words several reasons to reduce the leakage of P and the agriculture is one important area to attend. The aim of this work has been to investigate if carbon-rich arable soils content contain more P than arable soils with low carbon content. Moreover it has been calculated if the carbon-rich soils could pose a risk of P leakage by comparing their delivery of P with the plant uptake. The work has consisted of compiling the results from former gathered and analysed soil samples of 130 Swedish arable soils. The fractions of P considered are water soluble P (Pw), ammonium lactate-extractable P (P-AL), hydrochloric acid-soluble P (P-HCl), organic ammonium lactate-extractable P (Porg-AL) and inorganic ammonium lactate-extractable P (Porg-HCl).

The world we live in becomes more globalized as a result of new communication media. Communication occurs over greater distances which leads to increased travel. In the report AR5, by IPCC, it is showed that the human impact of climate change is clear and that something has to be done. Therefore its very important to change the human impact. A part of it is to change the way we travel within the service which leads to the purpose of the thesis.

A titania-supported nickel catalyst was prepared and tested in methanation in order to evaluate its catalytic properties (activity, selectivity and specially, activity loss), and compare it with an alumina-supported nickel catalyst.The titania-supported catalyst did not only show higher stability than alumina, but also presented a different cause of deactivation, carbon formation. In addition, a kinetic model was obtained for the titania-supported catalyst, and a study of the effect of different operating conditions (temperature, composition and partial pressures of synthesis gas and water) on the deactivation rate and carbon formation of this catalyst was performed.

This project aims to investigate whether algae can be used for biodiesel production in Italy. Algaes are a good option since they are fast growing and do not occupy arable land. The aspects that have been considered are growing, harvesting, which algae strain that is most suitable, extraction of oil, the production of biodiesel and where in Italy this could be possible due to climate. Cost? and energy calculations have been made to investigate if biodiesel produced from algae would be profitable. During the production of biodiesel there are several residues obtained. When the oil has been extracted from the algae, biogas is produced from the residual biomass by anaerobic digestion and then the electricity that can be produced is supplied to the production of biodiesel.

Regulations on the exhaust emissions of HD-diesel engines are becoming more and more stringent, and therefore, emission after-treatment systems are commonly used. These systems rely on catalytic conversion of NOx,CO , and HC emissions, and are thus dependant on temperature. At low load of the engine, exhaust temperatures are not sufficient for the after-treatment components. Therefore, means to increase the exhaust temperature while maintaining low emissions and fuel consumption are needed.The focus of this project has been to develop strategies for the lift profiles of exhaust and intake valves in the engine, with the goal to raise exhaust temperature in combination with low emissions and fuel consumption. The strategies have been tested in a single-cylinder research engine equipped with a hydraulic variable valve actuation system.

This report contains a study of replacing nuclear power with biofuel. The nuclear plant, OKG north of Oskarshamn in Sweden has been chosen and an extensive literature study about the nuclear plant has been implemented. The main aspect of this report is the availability of biofuels and whether it would be economically sustainable. Sweden?s most common biofuels are examined with regard to scope of use and potential.

The increasing threat of climate change has led to a increased need for models to predict future climat. In these models the changes in the soil carbon pools due to changes in microbiel degradation of the organic matter can lead to both positive and negative feedback-effects. There is however a lack of consensues on the temperature respons on degradation soil organic matter. This paper aim to give a better understanding on the factors controlling the temperature respons. The factors studied were the carbon substrate qualitity and the physiological status of the microorganisms.

Energy is an important issue in the current world which significantly affects sustainability and development. Energy generation and use are major sources of CO2 emissions which is one of the most important driving factors in global climate changes. The amount of energy used in house hold section can lead to estimation of the amount of CO2 emitted within this section which subsequently would be a ground to better management and maintaining a sustainable society. This study which is a bachelor?s project in sustainable energy, deals with estimation of CO2 emission from different types of residential houses in Sweden. An extensive literature review on energy use in Sweden by different residential sectors has been conducted.

This study was conducted to test the hypotheses that a forest managed by selective cutting can store more carbon than a forest managed by clearcutting. The study was carried out as a meta-analysis. The data that was found was analyzed by performing t-tests on the proportional effect that the two silvicultural methods had on the driving factors of CO2-efflux and carbon stores in coniferous boreal forest. In all areas tested, an effect in favor of selective cutting was found, but not all of them significant however. The soil respiration following selective cutting was significantly lower than that of clearcutting, and the primary production of a clearcut area cannot according to reason exceed that of an area post-selective cutting.

Uppsala County has ambitious environmental aims for the planned residential area inÖstra Sala backe. In this thesis different energy sources have been evaluated todetermine which system that would be most favorable given currently availableinformation about the project. Planned energy usage has been divided into tap waterheating, space heating and power. Three base case scenarios were made with districtheating, small scale bio fuel and heat pump. Solar power and solar heating were thensimulated and the production from the two could individually be deducted from theenergy need in the base cases, constituting 9 different scenarios.

The report aims to describe the austenitic stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the Carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.

The mining company LKAB extracts iron ore in three areas in the north of Sweden, Kiruna, Malmberget and Svappavaara. The iron ore is refined and in the pelletizing plants the material is rolled to finished pellet product. The different steps of pelletizing plants causes among other things emissions to the air. It occurs occasionally stops in the production and the emissions are vented via an emergency chimney without purification. The aim for this work is to look into how LKAB may improve their monitoring of air emissions and control of ambient air quality and the analysis methods which are suitable for measuring.