An environmental review has been carried out at FORIA AB, a transportation- and machine service company, to analyze the company?s environmental aspects from the transportation segment. This report describes the essential background and the methods of identifying and evaluate the environmental aspects. It also describes how the work with the environmental aspects often vary between different actors. The design of the ISO 14001 is intentionally broad in order to apply on all sorts of activities and organizations.

The municipality in Uppsala has set up goals for the future work concerning climate-and energy issues. As one way to achieve these goals the municipality started aproject called Uppsala climate protocol. During one of the project meetings anabatement map was presented. The map showed what savings in carbon dioxide andmarginal costs for different actions can be made. Statistics show that 40 % of thepopulation in Uppsala lives in a condominium.

Klimatförändring är en fråga som under senare år har fått mer och mer medial uppmärksamhet och svenskarnas individuella miljömedvetenhet uppskattas vara högre än någonsin. Individen pekas ut som att ha ett stort ansvar, men trots klimatkampanjer så fortsätter svenskarnas kollektiva klimatpåverkan ändå att öka. Denna uppsats syftar till att genom diskursanalys undersöka hur klimatansvar, i termer av ansvar för klimatpåverkan och klimatanpassning framställs i två Svenska dagstidningar, Dagens Nyheter och Uppsala Nya Tidning.Svenskt klimatansvar visade sig vara konstruerat på ett tvetydigt sätt där samhällets gemensamma påverkan verkar vara förenad med brist på enskilt ansvar. Individen är den aktör som oftast utpekas som förväntad att ta ansvar för klimatanpassning samtidigt som detta inte på något sätt krävs. De synsätt som präglade klimatdiskursen var de för ekologisk modernisering där fortsatt konsumtionsökning, tillväxt och grön teknikutveckling förväntas ta Sverige ur klimatkrisen utan att större livsstil- eller strukturella förändringar behöver göras.

Renewable energy and the charging of electrical vehicles will increase in the future. Therefore the risk of outages is also increasing, partly because renewable energy is intermittent and the production amount can change fast. Charging electrical vehicles is often demanding high effect in short time, which could make faults occur. It takes more advanced technology to short the outage time. Today Övik Energi has high reliability in the power grid, but in order to maintain the reliability, it is time to prevent problems that can occur in the future. This thesis has presented a suggestion for the placement of fault detectors Protrol IPS2, in which a total of four detectors is proposed.

Problems with the current energy system, which partially relies on non-renewable fuels, are increasingly recognized. Emissions of greenhouse gases from fossil fuels may speed up global warming, which in turn leads to a number of negative consequences. Nuclear energy is risky and relies on consumption of a scarce resource. This leads to a demand of renewable energy that is also economically feasible. One possible renewable source of energy is solar energy.

An environmental review has been carried out at FORIA AB, a transportation- and machine service company, to analyze the company?s environmental aspects from the transportation segment. This report describes the essential background and the methods of identifying and evaluate the environmental aspects. It also describes how the work with the environmental aspects often vary between different actors. The design of the ISO 14001 is intentionally broad in order to apply on all sorts of activities and organizations.

A renewed application for environmental permit for the Hovgården landfill in Uppsala shall be submitted before December 2004, therefore the municipality of Uppsala needs improved knowledge of the contents, mostly organic compounds in the leachate and they also want to find a method to minimize the emissions of these compounds. The purpose of this study was to find a practical and economical method based on chemical oxidation using oxidants. The oxidants investigated are Fenton's reagent, hydrogen peroxide, Oxypro, potassium permanganate and potassium persulfate. The study was made on untreated leachate and leachate that has been treated in an aerated dam followed by sedimentation dams collected from the Hovgården landfill, and alson on sludge water from sludge storage cells. The effects of the five oxidants have been established by analysing the UV absorbance at the wavelengths 253,7 nm and 260,0 nm at different pH values. The UV absorbance was used to indicate the amount of aromatic hydrocarbons in the water. Also analyses of iron and manganese were done after the experiments with potassium permanganate, hydrogen peroxide and Fenton's reagent.

Organic material used for biogas production can also undergo other treatments. The emissions and impact from the different treatments are evaluated in this environmental assessment, with a focus on energy and climate. The materials included in the study are organic household waste, slaughterhouse waste and liquid manure. Other than biogas production, the possible treatments for organic household waste and slaughterhouse waste are incineration and composting, and for liquid manure storing and spreading. The analysis is based on data and information from current and relevant literature, and relates to the conditions in the Swedish energy system.

Steel is an excellent material to build with, but consideration must be given to the fact that unprotected steel corrodes, rusts, therefore, as a rule, the steel must be protected in some way. This can be done by reducing the tendency of the steel to corrode by using stainless steel or by treating the steel with a protection method. The two most common methods of protection are corrosion protection paint and zinc coating. To determine the method, the corrosive category must first be evaluated and this is done in accordance to EN ISO 12944-2:1998.Stainless steel is available in many varieties but only some of them have properties that make them suitable for use as construction steels. There are many factors to be considered in the design of stainless steel to prevent corrosion from occurring.

This study in Environmental Science examines the amendment of the EU-Directive on. Greenhouse gas emission allowance trading. The Directive is to be considered as a tool for fulfilling the obligations that the Union and its member countries have taken on through the 1997 Kyoto agreement together with the protocols proposed at that time. The flexible mechanisms of the protocol are intended as instruments for limiting the climatic changes arising from anthropogenic sources, emission allowance trading being one of these mechanisms. The results presented here consist primarily of an analysis of interviews with various experts in the field of emission control concerning the possibilities and problems attending the process of implementation.

Perfluorinated substances (PF) are environmental pollutants that are used to coat fibres of so called ?all weather clothes? to make them water resistant. PF are effectively spread through water. Waste water treatment plants (WWTPs) are a pollutant source of these substances. PF are poisonous to different kinds of organisms, and supposedly also to human beings, if concentrations are sufficiently high.Perfluorinated substances have been investigated at three waste water treatment plants in Stockholm during the 2000?s.

This thesis aims to illustrate how environmental impact can be reduced, through the use of lean concrete. It also illustrates how environmental data can be applied to a house through implementation with BIM. In this study a unique concrete structure developed by Swedish Cement and Concrete Research Institute is assessed for environmental impact, by calculating the carbon dioxide equivalents using LCA methodology. The construction is a sandwich element where the concrete is made ??up of three layers.

Many of todays studies show that district heating is one of the betteralternatives as heating source because of its low environmental load.The energy source is often leftovers from other processes producing energy or waste, like garbage or chips.Electricity in combination with geothermal heating is another heating system that has increased sharply during the last years, and also this system decreases the discharges that have negative affectson the environment compared to several other heating methods.This report aims to, concentrated towards these two different heating systems, estimate the amounts of discharges they indirect cause and how the environment is affected.We have calculated the mean value for discharges of carbon dioxide, nitrogen oxide, sulphur oxide and dust generated from electrical power used in Sweden.Through interviews and research we have gained data for the same substances that district heating based on combustion of garbage and biofuel generates.We have also in cooperation with a housing company chosen a building we see representative for many of the new single-family houses built in Sweden today.Based on its shape and appearance we theoretically created three alternatives of the same house, each of them with climate screens different from each other.Together with the amounts of discharged environmental affecting substances, these houses were the base for our calculations and studies when investigating the different heating sources environmental effect.The results have thereafter been analyzed and discussed from different angles..

This project was aimed to study the degradation of polystyrene-butadiene-styrene block copolymer (SBS). SBS is used to modify bitumen, the binder in asphalt. From earlier studies it is known that SBS degrades in bitumen, but the degradation products have not been identified. To be able to determine the long term effects of SBS in the environment, degradation products need to be identified. Polystyrene forms rigid blocks with polybutadiene as a rubbery matrix between the ridgid blocks.

Detta examensarbete har utförts på uppdrag av Koenigsegg Automotive AB, som utvecklar, tillverkar och säljer högpresterande sportbilar. Företaget erbjuder fälgar tillverkade helt i kolfiberkomposit, som ger betydande viktbesparingar i jämförelse med traditionella metallfälgar.Efter tillverkningen kräver fälgarna viss bearbetning vid anläggningsytan mellan fälg och däck. Syftet med examensarbetet har varit att undersöka möjligheten att utföra bearbetningen av fälgarna in-house i Ängelholm, och målet har varit att konstruera en maskin för detta ändamål.Projektet inleddes med en litteratursökning, där svårigheter och möjligheter gällande bearbetning av kolfiberkompositer undersöktes. Till följd av de undersökningar som gjordes, valdes bearbetningsmetoden svarvfräsning och ett antal konstuktionskoncept genererades. Genom ett antal utvärderingar utvecklades ett speciellt koncept vidare till ett komplett produktförslag.Produktförslaget är komplett med analyser, beräkningar samt tillverkningsunderlag, som ger uppdragsgivaren bättre insikt i sina möjligheter.