The filters used today to purify water are often expensive and the need to find new filter materials is substantial. Studies of pine bark have shown that this is a material that may be used as an alternative to conventional filter materials, such as activated carbon. However, the study of pine bark has shown that a leakage of phenolic compounds may occur when using the material for water purification. Therefore, the purpose of this report is to investigate the release of phenols from pine bark, in order to evaluate the use of pine bark as a filter material. Another assignment is to investigate the amount of metals adsorbed by the filter material.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

Helstångsborr och konstång kallas bergborrverktyg, som tillverkas av sexkantiga stänger med inre hål för ledning av spolvatten. Dessa spolhål är klädda med ferritiskt rostfritt stål. Innan valsning borras ett centrerat hål i stålämnet som ska valsas. I det borrade hålet appliceras ett rör av ferritiskt rostfritt stål och i det röret skjuts en manganstålskärna in. Efter valsning dras kärnan ut och ett spolhål med invändigt foder av rostfritt stål bildas.

This report describes the master thesis project ?Weight Optimization of a Composite Chassis for a Multimodal Lightweight Vehicle? which is a part of the Master program in Naval Architecture and a part of a research project at the Centre for Naval Architecture, KTH. Demands on smart and energy efficient transport solutions are continuously increasing. In the Stockholm region the citizens are expected to increase with 25% and the road vehicles with 80% until 2030, putting high demands on the traffic system. Using a small multimodal vehicle deals with this problem and uses both the land and waterways for transportation.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.

Soils in a metal contaminated site on Stångberget in Gusum in southeastSweden were investigated and compared to relatively unaffected soils a fewkilometres away. Pollution came from historical release of untreated flue gasesfrom a brass mill. The objective was to find information on how high the metalconcentrations are, if metals from the polluted soil affect the surroundings andif the metal contamination affects the microbial community. The soil wasinvestigated using several different methods, such as field XRF measurements,chemical analysis of metal, carbon and nitrogen content, pH, acid neutralizingcapacity, texture, soil depth, field leach tests, sequential extraction and microbialfunctional profiles. The study showed that copper and zinc concentrationswere above Swedish Environmental Protection Agency guidelines for lesssensitive land use on the entire investigated area.

Cement manufacture accounts for 3-5 percent of total global carbon emissions. There is a growing interest in reducing the environmental impact and conserve limited natural resources. In cement production, clinker productions consume 87.5 percent of the total energy consumed in the cement manufacture.Cementa has since many years, focused on reducing the environmental impact of cement production. The work has involved the entire production process from selection of alternative fuels to the development of cement with less clinker content. During 2013/2014, two new types of cement (Bascement and CEM II / B) will be introduced to the Swedish market.

AbstractThis degree project is about having meetings in The Swedish Social Insurance Agency, which is awide organisation. This work will concentrate on one of the projects going on within theorganisation which is travel-free meetings, where they are building a video meeting system thatallows the employees in the organisation to be able to meet with each other through the use ofvideoconferencing instead of physical meetings.In this work we will show how Kaikaku (radical system changes) along with Kaizen (continuouschange) can support an organisation to become more efficient and reduce wastage. We have donethis work in an organisation that is present in over one hundred locations in Sweden.The Social Insurance Agency has over 13 000 employees at over one hundred locations inSweden.The organisation has to be close to their customers and provide the best service aspossible. To be able to work in a uniform way, the employees get together and have meetings.Some meetings are just progress meetings and takes perhaps no more than two hours to complete.However, if seven employees from seven different locations need to have meetings, in the worstcase, they all have to meet in a common place.This is expensive for the organisation in travel costs, time and absence from work, but thetravelling also contributes to environmental pollution if the employees are travelling by a fuelpoweredvehicle.A whole day could go lost for having a meeting in about two hours if all sevenemployees went from their own cities to e.g. Stockholm for the meeting.Muda (wastage) of travel created several different types of Muda, namely:? Wastage with anticipation when the employees had to wait for e.g.

With growing economies and better living standards in many parts of the world today, there is a need of expanding the capacity of generating electricity. The alternatives for renewable energy technologies are not fully developed and have still some problems to conquer.The company Minesto has developed a technology that is called Deep Green. It is designed to gain electricity from tidal currents. Deep Green works in a similar way as a kite that is attached to the seafloor with a moving wire. It contains of a wing that moves due to the water current.

AbstractThis degree project is about having meetings in The Swedish Social Insurance Agency, which is awide organisation. This work will concentrate on one of the projects going on within theorganisation which is travel-free meetings, where they are building a video meeting system thatallows the employees in the organisation to be able to meet with each other through the use ofvideoconferencing instead of physical meetings.In this work we will show how Kaikaku (radical system changes) along with Kaizen (continuouschange) can support an organisation to become more efficient and reduce wastage. We have donethis work in an organisation that is present in over one hundred locations in Sweden.The Social Insurance Agency has over 13 000 employees at over one hundred locations inSweden.The organisation has to be close to their customers and provide the best service aspossible. To be able to work in a uniform way, the employees get together and have meetings.Some meetings are just progress meetings and takes perhaps no more than two hours to complete.However, if seven employees from seven different locations need to have meetings, in the worstcase, they all have to meet in a common place.This is expensive for the organisation in travel costs, time and absence from work, but thetravelling also contributes to environmental pollution if the employees are travelling by a fuelpoweredvehicle.A whole day could go lost for having a meeting in about two hours if all sevenemployees went from their own cities to e.g. Stockholm for the meeting.Muda (wastage) of travel created several different types of Muda, namely:? Wastage with anticipation when the employees had to wait for e.g.

During the spring semester of 2012 did Petra Hollsten independently a thesis on reducing the environmental impact of capsule for coffee, tea and chocolate. The work was performed at Karlstad University, Faculty of Technology and Science under the Bachelor of Science program in innovation, technology and design. The project's scope is at 22.5 points.The employment for this project is the company Löfbergs Lila AB in Karlstad. Supervisor at the Principal has been Maria Herou Wallner and Sandra Lyxell, product managers. Supervisor at Karlstad University is Monica Jakobsson, lecturer and program leader for innovation and design engineering program.

Highly polluted urban storm water from e.g. highways can contain large amounts of heavy metals that may cause harm if they are discharged into recipients. To remove the heavy metals a possible low-cost method that does not require much maintenance, could be the use of reactive filters with filter materials consisting of industrial residues or other cheap mineral based materials. Dissolved metal ions are removed by reactive filters through the processes of ions binding to active sites on the surface of the filter materials, or by formation of insoluble precipitates.The ability of CaO-treated granulated blast-furnace slag, iron oxide coated sand, olivine and nepheline to remove seven heavy metals (Cr, Cd, Cu, Ni, Zn, Pb and Hg) from urban storm water was studied. Initially batch experiments were performed where the effect of pH, dissolved organic carbon (DOC) and dissolved ions on the adsorption efficiency was studied.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb heavy metals in leachate from a municipal waste deposit. The heavy metals studied were: lead, cadmium, copper, mercury, chromium, nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline.

AbstractFalu Copper Mine and Sustainable DevelopmentKarl-Markus AnsnaesFalu copper mine was Sweden?s oldest mine industry which lasted for almost a thousand years. Throughout the history its area has been vastly contaminated by sulfur oxide. The contaminations has created the mining area to an environmental risk zone which has the ability to spread out into the Falu River. The river has its connections to the Dal River which is discharging towards its mouth in the Baltic Sea.