The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

The quantity of methane emissions from sheep depend on several factors, for example, the composition of the diet, feed quality, the age of the animals, time of the day and maybe also breed and sex. A comprising literature review was made about which factors that affect the size of emissions. In addition, a questionnaire was sent to two farms, one with a more intensive production system and another with a more extensive system. Inventories of the two farms were made; the rest of the data needed to conduct the study was taken from literature and other sources. Meat produced at the more intensive farm caused emissions of 0.4 kg of methane per kg of bone free meat and the more extensive farm caused emissions of 0.9 kg methane per kg of bone free meat.

This thesis investigates the socio- and environmental economic effects of a deep repository for spent nuclear fuel in Forsmark in the municipality of Östhammar. I seek to show the general picture but focus on the effects on employment, environment and income. Cost-benefit analysis is used to investigate the differences in utility between a scenario with and a scenario without a deep repository in Forsmark. Most of the possible effects can not be valued and many can not even be quantified with the data available today. Therefore this thesis has a bit of a ?preliminary study character? and seeks to show what we know today and what needs to be further investigated when available data allow it. The costs that could be valued are noise from the traffic during the period of building and emissions of carbon dioxide and nitrogen oxides from the transportation of rock masses during the building period.

The castration of piglets is performed routinely all around the world. Most castrations are done without anaesthesia and analgesia, despite the fact that this procedure has been proved to induce acute pain and stress for the piglets. The procedure regarding castration of piglets is currently a hot topic of debate and an important political issue. The underlying issue is the boar taint which are highlighted in the heating of the meat after slaughter, which in turn can lead to reduced meat sales as it can be perceived as unpleasant for many consumers. The purpose of this study is to examine alternative drugs which may be selected in order to replace the practice of castration of piglets without anaesthesia, in light of improved animal welfare.

The purpose of this work has been to explore what ecosystem services a small green area in an urban environment can offer and whether specific trees can be used to maximize regulatory ecosystem services in a cultural-historical environment. Additionally, it investigates whether there is any difference in ecosystem services depending on whether these trees, or trees that better fit into the cultural-historical environment, are used. Through simulations and comparisons with existing trees in Pommerska tomten, Mariestad, Sweden, a pocket park within a national interest area, different hypothetical tree planting options are analyzed and evaluated. To measure ecosystem services, the website My-Tree, developed by the US equivalent of the Department of Agriculture, was used. By inputting data about the tree, such as location, species, vitality, stem diameter, and solar exposure, My-Tree calculates some of the ecosystem services the tree provides.

In a column experiment the effect of three different biochars on nitrous gas emissions, nitrogenretention and water filled pore space (WFPS) were studied in a Swedish sandy soil, classified as aCryopsamment. Ammonium retention was positively correlated, while KCl-extractable ammoniumwas negatively correlated, with the specific area of the biochars. The question was raised whether thenegative correlation between extractable ammonium and biochar specific area reflects the amount ofammonium present in the soil or its extractability from the biochar, and whether methods forextracting soil mineral nitrogen, like KCl-extractions, have to be modified for application on biocharamended soils. There was a tendency of increased nitrate retention and KCl-extractable nitrate withbiochar and KCl-extractable nitrate was positively correlated with the specific area of the biochar. pHwas higher for all biochars compared with control, although the differences were not significant, andWFPS was lowered by biochar addition, significantly in one case.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

Life Cycle Cost, often abbreviated as LCC, is a common tool for comparing the total cost of different alternatives, such as heating and cooling methods. Common heating and cooling methods in Sweden are geothermal energy, district heating and district cooling. This report aims to evaluate how different heating and cooling methods differ from each other while being applied on three different types of buildings, using selected LCC-models. Information about the selected LCC-models wasretrieved from each separate model and its website. Reports and agencies were used as sources for information about the heating and cooling methods.

To investigate effects of nitrogen on in-lake CO2 and CH4 production during winter, three pair of lakes was subject for a fertilizing experiment in which one lake in each pair was fertilized with nitric acid (HNO3) directly into the water column in the summer of 2012. The lakes in each pair are assumed to be morphologically, hydrologically and biologically similar, that is, the non-fertilized lakes are considered references. The pairs do differ in one major way by being progressively less humic, going from around 25 mg/l to 10 mg/l DOC. Sampling and analysis was carried out at the end of the frozen period in 2013. Results show a significantly higher concentration of both CO2 (p<0,001) and CH4 (?=0,1, p=0,053) between impact and reference sites in the two less humic pairs.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

This paper deals with the opportunities for the technique of condensation, for wood fired household heaters, on the Swedish market. In this project the condenser is preceded by a scrubber and both energy exchange and separation of unburnt particles have been studied. The facility studied is connected to a wood stove at 30 kW. The tests would show that the effect from the stove never reached above 16 kW. This might be a result of the low temperature of the water going into the stove, from the condenser. In addition to this the wood was not of highest quality and the stove could have needed some maintenance before the tests.

Lokala investeringsprogram was a subsidy program which supported environmental reforms during the years 1998 to 2002. The subsidies were given to Swedish municipalities. Most of the evaluations of the subsidised projects have now been completed and included in a database. The purpose with this thesis is to analyse whether the instrument has been effective with respect to carbon dioxide reductions and costs. These calculations have focused on subsidy and cost efficiency. The analysis has been compared with a previous report called "LIP ur ett samhällsekonomiskt perspektiv". The result shows that the reduction cost for one kg CO2 has been almost one SEK, which is twice as high as the cost reported in a previous report, half a SEK.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.