Agriculture has to be performed in a sustainable way in order to sustain high yields and to support a globally growing population. Functional soil properties are fundamental for high yields and in order to achieve good soil conditions sustainable management is a key. Loss of soil organic material and increased soil acidity are problems associated with degradation of soils and hence less sustainable agriculture. In this thesis, the effect of different agricultural systems on soil organic matter, pH and yield was examined. The systems examined are a cereal system with straw removal or returning and a ley system, all with different nitrogen levels.

Stunning of pigs at slaughter constitutes of primarily two methods; carbon dioxide and electricity. Both methods have advantages and disadvantages from an animal welfare point of view. The purpose of this study is to compare different methods of stunning pigs from a welfare point of view. Questions included in the study are 1) What differences are there, from an animal welfare point of view, between CO2 and electricity as methods for stunning pigs? 2) What alternatives are there to the methods currently in use? 3) Which method for stunning pigs is preferable from an animal welfare point of view?This report is a literature review.

This is a graduate work at the Swedish University of Agricultural Sciences, The Department of Urban and Rural Development, Ultuna. The purpose of this paper has been to find out and describe principles for designing parks that offers good recreational and aesthetical values and require little amount of Carbon dioxide emissions during their maintenance. The purpose has also been to see if it's possible to use city wastewater in some extent to assure the plants water supply and to find other means to make it less necessary to use purified water for watering. Recently made studies as well as older ones show how important green areas are in dense city structures both from a health and a climate perspective. Trees and other plants adsorbs different forms of air pollution and can also lower the temperature in the surrounding area through their transpiration.

In coastal wetlands carbon/organic matter can be stored for long periods of time thanks to, among other things, the presence of water which slows down the decomposition. Because of this, restauration and management of such habitats have the potential to decrease the emission of greenhouse gasses and help mitigate climate. Internationally these environments are called ?blue carbon? ecosystems. In Sweden, alder (Alnus glutinosa and Alnus incanata) covered wetlands along the coast is a nature type that potentially could function as a ?blue carbon? habitat.

Fuel produced from renewable resources is of big interest. In this project the difference between a few different renewable materials are compared on the matter of environmental load when ethanol is produced. The renewable materials that are compared are Salix, straw and reed canary-grass (rörflen). The cellulose in the material is cut down to small pieces and then hydrolysed so that the sugar from the cellulose can be fermented into ethanol. Tha amount of ethanols that is studied in this work is the smount of ethanol needed to cultivate 1000 ha. The functional unit in the report is 1000 ha.

During the 19-century a global warming has been observed, which includes increases in global air and ocean temperatures, widespread melting of ice and snow, and rising global sea level. There is a clear connection between emissions of greenhouse gases caused by the human and the increase in temperature. Climatic changes caused by global warming can be stopped trough decreased emission of fossil fuels, for example by an increased use of biogas. Biogas is a renewable energy source which is produced through anaerobic (oxygen free) digestion of organic material. The gas is a mixture of methane (CH4) and carbon dioxide (CO2) and can be among others used as fuel in vehicles.

The purpose of this thesis was to examine how locally produced bioenergy may contribute to meet the climate target year 2050 in the municipality of Uppsala. The goal of reduced GHG-emissions from current 6,8 ton CO2-equivalents to 0,5 ton CO2-equivalents per capita and year, year 2050 is based on avoiding harmful penalties of an increased level of GHG in the atmosphere. By estimating available biomass in the county together with examining future technologies and emission factors for the substrates used, four possible future scenarios has been developed focusing either on electricity generation or production of biofuels. GHG-emissions of year 2050 have been calculated using the software LEAP. The conclusion is that bioenergy, depending on how it is integrated in the energy system, may reduce greenhouse gas emissions between 0.6 ton CO2-equivalents and 1.4 ton CO2-equivalents per capita or 12% to 25% compared to 5.5 ton CO2-equivalents in the reference scenario 2050. The greatest reduction is obtained if biofuels are produced in combination with energy efficient heat requirements in buildings..

The effect of climate change places demands on how we build cities. Cities have to be built denser to meet the objectives of sustainability but as a result of this densification city green areas are at risk of exploitationand disappearing. The question this raises is whether there has to be an opposition between a dense and a green city?Urban trees are playing a very important role in cities. They stand as the major part of the vegetation in citieswhich are otherwise dominated with concrete and stone.

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..

Global climate change is one of the greatest challenges in our history. As the average temperature is rising due to anthropogenic emissions, impacts such as floods, droughts and hurricanes, affect the lives of millions of people. Though the least developed countries are least responsible for emissions, they are the worst affected. This thesis focuses on environmental justice in the adaptation discourse. By outlining the adaptation discourse from the United Framework Convention on Climate Change principles, to the Marrakesh Accords, via the Kyotoprotocol my ambition is to analyse how environmental justice has been interpreted in relation to the adaptation discourse.

The purpose of this study is to create a method that can be used to produce decisionsupport data for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make longterm projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate protocol project in a case study. Uppsala climate protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal. Public reporting of energy use and climate impact has been studied in order to examine the nature of indicators and accounting figures that are commonly used in the field and how long-term forecasts are formulated. In connection to this, the type and sources for the kind of data needed was also examined.

The purpose of this study is to create a method that can be used to produce decision supportdata for the climate goals of a municipality. The method should be able to demonstrate the potential for reducing energy use and greenhouse gas emissions for measures aimed at the stationary energy system in the municipality. It will be used to make long term projections of energy use and greenhouse gas emissions in order to be able to demonstrate the ability to reach climate goals. The aim was also to test the method's applicability by using the municipality of Uppsala and the Uppsala climate protocol project in a case study. Uppsala climate protocol is a project consisting of participants from business, government and organizations that voluntarily want to commit to reducing their carbon footprint by reducing their energy use and thus work to achieve the municipality's overall climate goal.

Northeast Stockholm is a region developing fast. There is already a great need for new transport solutions for the people commuting to the city, since long queues slow down car traffic and the local railway, Roslagsbanan, needs to be upgraded to attract more travelers. The competitive advantage of rail?traffic over the car when it comes to greenhouse gases and air pollutants is another reason to develop Roslagsbanan.This report investigates the differences between car and train to create a basis for a proposed expansion of Roslagsbanan. Once the proposal is presented, costs, emissions reductions and public benefits are analyzed.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

A titania-supported nickel catalyst was prepared and tested in methanation in order to evaluate its catalytic properties (activity, selectivity and specially, activity loss), and compare it with an alumina-supported nickel catalyst.The titania-supported catalyst did not only show higher stability than alumina, but also presented a different cause of deactivation, carbon formation. In addition, a kinetic model was obtained for the titania-supported catalyst, and a study of the effect of different operating conditions (temperature, composition and partial pressures of synthesis gas and water) on the deactivation rate and carbon formation of this catalyst was performed.