To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

SecRePac is a household appliance that simplifies sorting of packaging such as milk, juice and yogurt containers. By shredding the packages SecRePac reduces its volume uptake both in the home and at the recycling station. This leads to minimization of both transports to the recycling stations and truck transport for emptying the containers at the recycling station.The greenhouse effect deteriorates and becomes worse and worse leading to extreme climate changes and natural disasters such as floods as an example. Carbon dioxide emissions are the major reason for this and at least 30 percent of all these emissions come directly from transports. In the EU carbon emissions has decreased in the past few years.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

Climate change is one of the most difficult problems that humans have to deal with. Today, the evidence of human effects on the climate change and the rise of temperature on earth are strong. It is extremely important that all countries get together and cooperate in order to be able to solve the problem with climate change. One step in the work on climate changes is the Convention on Climate Change, which was agreed on in 1992. The Convention on Climate Change resulted in the Kyoto Protocol in 1997. The Kyoto Protocol is an agreement between a number of industrialized countries to limit or reduce the green gas emissions.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

That air pollutants of different kind has impact on our climate can hardly haveavoided anyone during the past years environment explosion in the media. But howis it actually with the reverse, i. e. the climate's impact on air pollutants? The aimwith our degree thesis is to try to find out if different weather factors, statisticallyseen, promotes atmospheric pollutants and particles in the air and vice versa.We got access to data on air pollutants and weather factors that was registeredduring year 2007 at Femmanhusets air pollutant and weather station in Gothenburg.In order to do a statistical investigation of these data, and to be able to analyze if itoccurs relations of various kind, we used the statistics program SPSS.

One of the most common ways to produce heat and electricity in Europe today is by the incineration of waste or combustion of coal. These materials can be very sulfurous and during combustion sulfur dioxide is produced. This is an environmental and health related toxic substance which is why power plants have strict regulations on removing it from the flue gas. Sulfur dioxide is removed from the flue gas by adding a limestone reagent. The sulfur dioxide reacts with the limestone and the synthetic product obtained is ?Flue Gas Desulfurization gypsum?.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

In Sweden the work of reducing acidification and its prime cause; emission and deposition of sulphur dioxide, has been going on for decades. Despite of all the work that has been done the positive progress in the acidified areas is slow. This is partly due to a long recovery time for the acidified areas but also because the reductions of emission and deposition of sulphur dioxide have not been large enough. Emissions of sulphur dioxide from land based source in Sweden are estimated to 34 000 tons in the year of 2010. During the same year, approximately 182 000 tons of sulphur dioxide will be deposited over the Swedish territory.

Background and problem: In the last few years the threat against the environment and especially the emissions of carbon dioxide has become increasingly debated. The government have set up a goal to lower the emissions of carbon dioxide with 40 percent until 2020 compared to the level in 1990. The emissions in the transportation sector have, in contrast to the total emissions, increased since 1990 and will continue to increase unless powerful control measures are implemented. The lorry centres have to use strategies to answer to these external threats which lead us to the two questions of this thesis: - What methods do the lorry centres use actively and which do they consider as the most important methods for fuel saving? - Are there any differences which methods small, medium and large centres considers as important? Purpose: The main purpose of this thesis is to examine which methods lorry centres use actively and which they consider as important for fuel saving.

This project aims to investigate whether algae can be used for biodiesel production in Italy. Algaes are a good option since they are fast growing and do not occupy arable land. The aspects that have been considered are growing, harvesting, which algae strain that is most suitable, extraction of oil, the production of biodiesel and where in Italy this could be possible due to climate. Cost? and energy calculations have been made to investigate if biodiesel produced from algae would be profitable. During the production of biodiesel there are several residues obtained. When the oil has been extracted from the algae, biogas is produced from the residual biomass by anaerobic digestion and then the electricity that can be produced is supplied to the production of biodiesel.

Coastal sediments are important carbon sinks, storing organic matter and thereby helping to reduce the amount of greenhouse gases in the atmosphere. However, they can also act as carbon sources if the deposited organic matter decomposes rapidly, contributing to increased greenhouse gas emissions and global warming. Rapid decomposition partly depends on the degradability of the material itself. In this literature review, I examine which coastal plant species dominate different locations along the Swedish coast, based on coverage data from the ClimScape project (www.climscape.se). For the most dominant species, I investigated the type of organic matter they may contribute to the sediments and based on those results I qualitatively assessed which sites that may function as carbon sinks or sources.

Uppsala County has ambitious environmental aims for the planned residential area inÖstra Sala backe. In this thesis different energy sources have been evaluated todetermine which system that would be most favorable given currently availableinformation about the project. Planned energy usage has been divided into tap waterheating, space heating and power. Three base case scenarios were made with districtheating, small scale bio fuel and heat pump. Solar power and solar heating were thensimulated and the production from the two could individually be deducted from theenergy need in the base cases, constituting 9 different scenarios.

Phosphorus (P) is an essential nutrient but a surplus could lead to eutrophication. Furthermore, the minerals used to produce the mineral phosphate is a non renewable resource. There are in other words several reasons to reduce the leakage of P and the agriculture is one important area to attend. The aim of this work has been to investigate if carbon-rich arable soils content contain more P than arable soils with low carbon content. Moreover it has been calculated if the carbon-rich soils could pose a risk of P leakage by comparing their delivery of P with the plant uptake. The work has consisted of compiling the results from former gathered and analysed soil samples of 130 Swedish arable soils. The fractions of P considered are water soluble P (Pw), ammonium lactate-extractable P (P-AL), hydrochloric acid-soluble P (P-HCl), organic ammonium lactate-extractable P (Porg-AL) and inorganic ammonium lactate-extractable P (Porg-HCl).

A titania-supported nickel catalyst was prepared and tested in methanation in order to evaluate its catalytic properties (activity, selectivity and specially, activity loss), and compare it with an alumina-supported nickel catalyst.The titania-supported catalyst did not only show higher stability than alumina, but also presented a different cause of deactivation, carbon formation. In addition, a kinetic model was obtained for the titania-supported catalyst, and a study of the effect of different operating conditions (temperature, composition and partial pressures of synthesis gas and water) on the deactivation rate and carbon formation of this catalyst was performed.