Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Immune stimulating complex (iscom) matrix is a formulation that is used as anadjuvant within research. The capability of the iscom matrix to elicit an immuneresponse when not present together with an antigen has not been extensivelyinvestigated. One way to evaluate the status of the immune system is to measure theamount of cytokines that usually are produced by various cell types during an immuneresponse. The aim of the present study was to evaluate the early immune responses inporcine peripheral blood mononuclear cells (PBMC) after stimulation in vitro with theiscom matrix, AbISCO®-100. The immune response was evaluated by measuring themRNA expression for various cytokines, a chemokine receptor (CXCR4) andregulator of G-protein signaling (RGS16) in porcine PBMC after stimulation withAbISCO®-100 or other inducers like a lipopolysaccharide (LPS) and a CpGoligodeoxynucleotide (ODN 2216) used as controls.

Background: Students, at a secondary upper school, attending a practical programme have a lower physical capacity than students from theoretical programs. Our physical self-esteem has a great significance for our motivation in being physically active and thereby also for our health. The purpose: of this study is to find out if there is a difference between perceived physical self-esteem and objectively measured physical activity between students attending a practical programme and a theoretical programme. Method: Four classes, in a medium-sized town in the southeast of Sweden, participated in the study, two classes from practical programmes and two classes from theoretical programmes. All the students were in their final year at the upper secondary school, when they were part of the study during the autumn of 2011.

At Flight and Systems test Saab AB, a post-processing software is used to process GPS data. A new software by the name GrafNav has been purchased and the purpose of this master thesis therefore became, partly to make a judgment regarding GrafNav?s ability to estimate position, velocity and accuracy, partly to if needed improve the estimate and finally find one or several methods to estimate the position and velocity accuracy. The judgment of GrafNav was performed partly by a comparison to the former post-processing software (PNAV) and partly by a comparison to the airplane?s inertial navigation system (INS).

Background: Hepatitis E (HEV) is a small, non-enveloped virus that belongs to the viral genus Hepevirus. HEV is a positive sense single-stranded RNA virus and there is insufficient information regarding its replication. This is mainly because the virus has low capacity to grow in normally used cell cultures. Many specific strand assay detection studies have been done in order to understand more about HEV replication. Unfortunately, these assays have the disadvantage of giving false positive results.Aim: The aim of this project was to improve the positive strand assay to increase specificity and eliminate false positivity which is due to high sensitivity of the polymerase chain reaction (PCR).

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Background: High demands are today placed upon Swedish elderly care nurses as more elderly live with multimorbidity while the hospital bed capacity is becoming lower. Aim: The aim of the study was to explore nurses? perception of decision-making in situations with acutely ill patients in nursing homes and which factors may influence the decision about transferring patients to the emergency department or not. Method: This is a qualitative study with a phenomenographic approach. Semi-structured interviews have been conducted with 11 nurses working in nursing homes. The data analysis was based on Dahlgren and Fallsberg (1991) data analysis. Result: Three different description categories were presented, which describes variations of the nurses? perceptions.Feeling comfortable in making the decision; which involved the nurses feeling confident in the decision-making about transferring patients to the emergency department or not.Hesitant in making the decision; which described how nurses perceived the decision-making as problematic, with regard to transferring patients to the emergency department.Many wishes to consider in taking the decision; which explained how nurses? decision-making was influenced by requests from the patients or from people close to them.Conclusion:  The study reflected how  supporting and aggravating factors could influence how nurses in nursing homes perceived the decision-making and how nurses have to take in consideration different opinions concerning the decision making process of transferring patients to the emergency department or not.

This thesis was performed as assignment from Fazer Food Services. The aim was to survey which food additives that were present in the products in the quotation list of one of their suppliers to the Education and Nursing segment. The aim also was to perform a theoretical analysis of these food additives and to make recommendations which food additives are acceptable and which should be excluded from the products in the future. The recommendations are not published in this report, for more information Fazer Food Services can be contacted. Food additives which have already been approved are regarded as safe according to the safety evaluation methods available at the time of approval.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

When harvesting ley you hope to get a fast drying and a faster harvest. If there is a system with round bales, you need to have a dry matter close to 45 %. To make this as fast as possible, there is made a machine which pick up the grass with an pick-up. It turn the grass over and put it behind the machine (figure 2 and 4). There are few tests to prove the efficiency of this machine.

The competition policy in the EU should guarantee that the competition is not distorted in the way that would prevent or create difficulties for the free mobility of goods and services between Member states. It is prohibited for companies to abuse their dominant position according to Article 82, if it affects trade. The essence of Article 82 is control of market power. The perfect competition results when supply and demand appoint the price and quantity of a product. Firms are encouraged to compete then it results in efficiency, quality products and lower prices.

In this study potential health risks for employees in connection with handling of bottom ash and bottom ash water at a Municipal Waste Incineration (MWI) plant have been investigated. Air surrounding the bottom ash and the bottom ash water has been examined. MWI is one of the primary ways to manage solid household waste, and bottom ash is the main solid residue produced by the incineration process. Bottom ash constitutes about 15-20% of the original waste. The bottom ash is extinguished in a water bath (bottom ash water).The study was carried out in a MWI plant in Karlstad, Sweden.

There are several factors influencing the profitability of production with sheep. Two of the most important factors are ewe fertility and lamb survival. Also growth capacity of the lambs is important. This paper aims to review correlations between the ewe?s fertility and maternal behavior and lamb survival.

A child with functional disorder getting close to starting school has different types of schooling to choose between. Parents and the school of the matter have to agree in consultation. I use the conceptions included and segregated schooling to show different ways attend school. By included education I mean that all students with as well as without functional disorder in a group shall be completely comprised in the situation and not be separated from the group by individual exercises (Fors 2004). A segregated schooling is often pursued in special school where all the students have functional disorder and the education usually takes place in separate buildings (Emanuelsson 2001).I have completed a qualitative case study of a boy who is 14 years old and has the functional disorder Down?s syndrome and has been placed at a special school his entire schooling.

Ett mönster är uppbyggt av ett motiv som upprepas. Denna upprepning kan fortsätta i all oändlighet. Hållbar antyder långsiktighet. Mönstrets övergripande egenskap är oändlighet. Hur kan denna egenskap hos mönstret nyttjas inom mönsterdesign för att främja hållbar utveckling? Det här kandidatarbetet undersöker mönsterdesignens möjlighet att verka för hållbar utveckling genom att se till begreppet mönster ur ett bredare perspektiv, samt i relation till design för hållbar utveckling.