The Swedish production of biogas was 1,5 TWh 2011. About half of the production was used as vehicle fuels. The cost for upgrading biogas depends on the size of the biogas plant and its gas production. If the gas flow is low the cost will be high. However, further development of existing upgrading technologies or development of new ones, have good potential to decrease the upgrading cost for small scale biogas plants.

Between 1965 and 1974, the Swedish Parliament decided to build one million dwellings, called Million Program. The million program buildings were erected with new, untried design solutions, in a short range of time, and at low cost. The residential buildings from that time are now greatly in need of renovation. The municipal housing company, Gavlega?rdarna, renovates and improves the energy efficiency at some of it?s apartment buildings in the district Sa?tra, Ga?vle.

This report treats detection in IR-pictures taken from airplanes over the ground. The detection is divided in two parts. First there is a detection with filterkernels with the task to point on targets and objects that look like targets. The second part is a discriminator that demands more calculations and has the task to sort out the false alarms from the discriminator. Both the detector and the discriminator contain thresholds thats been trained from trainingsets of data.

Background: Cerebral Palsy is usually divided into three subgroups: ataxic, spastic and dyskinetic, where children and adolescents can, because of misestimation in nutrition and energy intake, suffer from weight problems.Aim: To compare calculations with equations with the individual's measured RMR in the subgroups, to see if any equation is more suitable. This could be used as a tool to calculate the resting metabolism at times when it is not possible to perform clinical measurements.Method: The RMR has been measured in 37 children and adolescents aged 3-15 years through indirect respiratory calorimetry. Those values have been compared with calculations from five equations. The results were then analyzed in order to find if any equation is better to apply for calculating resting metabolism for each subgroup.Results: The ataxic group was overestimated by 56.5% of the calculated values. WHO/FAO/UNU?s equation indicates a significantly strong correlation between the measured and calculated values (r=0.85, p<0.05).

The thesis aims to compare differentpiping materials in heating systems interms of cost as well as to illustratethe impact of energy characteristics ofdifferent materials over its servicelife. The methods used for costcalculations regarding piping are alsoto be examined to highlight thedifferences between template basedcalculations and more carefully executedones. The work is delimited to discusspipes of steel, copper, plastics andcomposites. The aim is that the resultcan be compiled to illustrate the prosand cons of various materials whenevaluating investments.The main object of the survey is part ofa heating system in the office-block KVSommaren located in southern Stockholm.The configured piping system is designedwith the mentioned piping materials andis used to make up the data for flow andcost calculations. The differentmaterials are calculated in both aconventional manner with a supplementarycost for additional fittings and with amore accurate quantification of thecomponents.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.

The thesis evaluates a new kind of bearing arrangement in a traction motor that ABB hasdeveloped. Since the arrangement is designed in a new and innovative way it needs to beevaluated to see if it is safe to use. In today?s traction motors, bearings with a big internalclearance (C4-clearance) are used. The basic idea of the new arrangement is to reduce the fitsbetween the bearing and shaft/house.

Although Lean has received an increased amount of attention in the service context, research still has not established how successfully Lean manages to increase service productivity; since service productivity consists of both efficiency and quality. Research regarding productivity discusses the risk of a tradeoff between efficiency and quality in service production processes. Therefore, this thesis aims to explore if the tradeoff in a production setting with low variability in demand and low customer participation exists, after Lean has been implemented. With a qualitative approach, a case study has been conducted at Scandinavian Airlines Ground Handling to evaluate the effects of Lean in the baggage handling process. The result of the study shows that the tradeoff has not been overcome; efficiency has increased at the expense of quality.

In recent years it has become more and more evident that man has contributed to much of the climate changes that have taken place during the last century. A major challenge today is to reduce emissions and energy usage at the same time as the global population is growing. To contribute to a better environment, Stockholms Stad has set at target of becoming fossil fuel free by the year of 2050. The construction of new districts is done with this goal in mind; energy efficiency and renewable energy sources are examples of methods to achieve this.Solar energy is considered to be a sustainable energy source and the most common techniques to harvest solar energy in Sweden are solar cells and solar collectors which produce electricity and heat respectively. This report aims to investigate whether an investment in any of these systems would prove to be economically beneficial at Kvarnholmen, a district under construction in eastern Nacka, Stockholm.Since the finished blueprints only cover a small portion of Kvarnholmen, the report examines the possibilities for a house where construction has already begun, Nya Kvarnen.

Thymidine kinase 1 (TK1) is an intracellular enzyme involved in ?the salvage pathway? where the uncomplete parts of DNA are transformed into DNA precursors. The expression of TK1 is cell cykle specific, with the highest level during S-phase when DNA-synthesis is most active. One kind of TK1 is present in serum and an increase in TK1 activity in serum is due to either the level of DNA synthesis in the body or the number of cells dying in a state of replication. This can be used and is used as a marker for prognosis and evaluation of treatment in human patients with leukemia and lymphoma.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

This rapport handles the presence of two kinds of watermills in the Swedish landscape. The first is a small type with a horizontal shovel blade and the other a bigger kind with a vertical standing shovel scoop. The rapport seeks for information of their capacity and how long they existed as flour producing units. A important issue is how small can a brook be and still run a mill. Finally the reasons for their disappearance in one selected parish is shown..

Today?s environmental discussions have led to more progress in the different transportareas. To ride a bicycle is often one of the most efficient alternative when it comes totransport. An Electric bike is, and makes transportation more efficient than a regularbicycle. Electric bicycles do not affect the environment significantly and allows moreconvenient transportation than ordinary bicycles do.

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.