The master thesis ?Mechanical Integration of an IR-detector in a Micro Cooler? has beenperformed at FLIR Systems AB in Danderyd. FLIR Systems is a world leader in the design,manufacture and marketing of thermal imaging camera systems.The thesis project is divided into to two areas, Production Method and Noise.The Production Method concerns the positioning of a detector on the cold finger within the IRcamera.The detector has to be positiond with very high accuracy at the center of the cold finger,so it can be placed in line with the optical axis to avoid movement of the picture during zooming.The positioning of the detector is at present done with the help of specially designed guides on aplate on top of the cold finger. The design workes well but the special machining needed for thisplate is very expensive.The goal concerning the production method was to derive a new more cost effective method forthe assembling and positioning of the detector on the cold finger by replacing the guides on theplate with a reusable equipment or some other alignement operation.Several concept ideas have been generated with the help of concept generation methods in theform of concept classification trees and concept combinational tables. Two of these conceptswere selected to be further refined.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

This work has been done to develop a plan for a future dairy barn at theGästgivaregården and to show the space needed for cows and replacement heifers. Itwould also show the storage that will be needed. The design was largely based on resultsfrom studies on six different farms, but also the facts that are taken from research papersand articles in order to compare theory with practice. Because some farms only whereinterviewed by phone I have used a query form to obtain comparable resultes.The aim is to build a new barn with Automatic milking. I've drawn a milking stable for120 milking cow and replacement heifers with the capability to house up to 140 milkingcows if the farm would expand in the future.Calculations of feed amounts and space requirements have been made to see how manyhectares are needed to supply the cows and replacement heifers with feed and to knowabout what size of storage space is required.The investigations made in this writing are to answer questions about the AMS-unit`sposition and how to best maintain a good health status in the herd.

Tractors of today come equipped with a CAN-system. A CAN-system sends information from sensors to electronic control units who process the signals. The sensors measure several interesting parameters such as force, pressure and speed for various components of the tractor. This thesis discuss a force sensor which is placed in the pivot of the tractors three point linkage, the sensor measure the horizontal reaction force from the load that the tractor is exposed to. Signals from this sensor can be used to measure the force from any implement that the tractor is exposed to during an operation.

Before the European construction standards were introduced in January 2011, it was mainly themethod in BBK04 that was used for calculating punching capacity in concrete structures, and in lesscommon cases the method in BHB. The method of BBK04 is easy to use and have had the samestructure since the first was published in 1979. The Concrete handbook method (BHB) where usuallyonly used when a higher punching capacity was needed and the cross-sectional height where fixed,calculations using this method entails more work, but will in return usually give a higher capacity. Italso allows the use of shear reinforcement to increase the cross-section capacity. The method ofcalculating punching shear in EC2 differs largely from the methods of BBK04 and BHB.

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

The acid deposition of sulphur- and nitrogenoxides from combustion of coal and oil cause acidification that lowers pH and gives increased contents of metals and altered aquatic biodiversity in the stream. The liming of lakes and streams, which was introduced to resist the acidification, demand large economic resourses despite of the decreased deposition of the acidifyng substances. Some of the streams are influenced by the acid deposition, while others are naturally acidic. It is therefore importaint to separate the anthropogenically acidified waters from the naturally acidic, in order to optimize the use of governmental fundings for liming. This thesis aims to estimate the acidity status and impact of acidification on 24 catchments upstream liming dispensers, which is part of the liming activities at the County of Dalarna.The acidity status of the streams was classified according to the Swedish Environmental Protection Agency old classification system (Naturvårdsverket 1999) as very acid to acid, with small ability to withstand a pH-change (alkalinity) due to acid deposition.

The society is developing fast and the development is constantly on-going, new technology results in new opportunities and new problems for both companies and consumers. The use of Internet has heavily increased around the world; this means that the companies can use Internet as a channel of communication to reach the consumers. The most recent type of marketing is web marketing. The fact that web marketing is constantly changing raise the question of how effective different types of web marketing are.The purpose of this study is to investigate four selected types of web marketing. This is achieved by comparing the response from the consumers and the cost for the different types of web marketing.

The objective of this thesis was to develop a method for the planning of road upgrading at Holmen Skog, a Swedish forest company. A critical issue for creating such plans is to identify roads that are suitable to upgrade to a standard that can handle heavy traffic during spring thaw, since spring thaw is a bottle neck for transporting timber. The method was tested in a case study at a district. The work consisted of two parts. The first was to retrieve and prepare geographical data for the roads.

During the period 1952-2008, real prices of wood before taxes and charges declined. However, the actual net income has not changed by the same percentage as the price list, because taxation, driving costs and the ability to make deductions has changed. This report considers the inflation by using the Swedish consumer price index. Net income refers to the remaining income when relevant costs, taxes and fees have been paid.The purpose of this study was to examine how the private forest owner's real net income has evolved over the period 1952-2008 for three categories of forest owners. These three categories are1.

There have been changes in Earth?s climate system on both global and regional scale since the pre-industrial era and some of these changes are due to human activities such as the combustion of fossil fuels. This calls for the development of engines with a higher efficiency and less harmful emissions. One interesting concept is the Homogeneous Charge Compression Ignition (HCCI) engine, which has the advantages of potentially low emissions combined with high efficiency. However, HCCI with diesel fuel requires a relatively long fuel/air mixing time to ensure a "homogenous" charge.

REINERTSEN AS performs expansion and buckling analyses of pipelines using ANSYS, afinite element modelling and analysis tool. In an expansion analysis the pipeline is modelledwith thin?walled pipe elements called PIPE20 which allows plastic deformation. However, ina recent analysis the results retrieved from the PIPE20 element were incorrect for strainsabout 1 percent. One main issue was that the PIPE20 element overestimated the strains.The purpose with this Master Thesis was to become familiar with the theories and analysismethods used in pipeline design.

Evaluation of machinery costs is necessary for selecting appropriate farm machinery. Timeliness cost due to untimely operations is an important component of machinery costs. Timeliness costs can be high for crop sprayers, since pesticide application must be carried out within a short time interval. This Master thesis investigated the timeliness cost and the probability of a suitable workday for spraying. Timeliness factors were estimated for four different crops (oats, spring wheat, winter wheat and barley) using historical weed trial data.