Geothermal energy can be extracted from an aquifer, where the groundwater is used as heatexchange medium while heat and cold are stored in the surrounding material in the aquiferand to some extent in the groundwater. Application of aquifer storage for the use ofgeothermal energy is mainly used in large scale facilities and is limited to sites with suitableaquifers in the form of ridges, sandstone and limestone aquifers.Löwenströmska hospital in the municipality of Upplands Väsby, north of Stockholm, islocated nearby the northern part of the Stockholm esker. This means that it can be profitableand environmentally beneficial for the hospital to examine the possibilities of aquifer storagein the esker material next to its property.The purpose of this master thesis has been to investigate if geothermal energy storage with aseasonal storage of heat and cold can be applied within Löwenströmska hospital?s propertyarea using groundwater modeling. A hydraulic groundwater model was constructed inMODFLOW based on a simplified conceptual model of the groundwater system.

Lean production is the name given to Toyota?s Production System (TPS) by the west. The continuous improvements of their operations through Lean has made Toyota into the largest car manufacturer in the world. This, in turn, has led to several studies regarding both Toyota and their system as to find ways to apply Lean in other organizations. Even so, over 90 percent of all companies fail to implement Lean.

The aim of this Master's thesis is to examine what effect two different models of acquisition have on user satisfaction with information resources at academic libraries. The two models examined are the traditional model where a subject specialist librarian makes the selection, and the user-governed model where the larger part of the selection is based on user requests. The scope is the libraries of Roskilde University, which employs the traditional acquisition model and Malmö University, which employs the user-governed. Both libraries have a user-oriented approach to acquisition. The study encompasses a close examination of the acquisition policy through document analysis and interviews with the librarians in charge of acquisitions at each university, as well as a user-satisfaction survey among the professors and senior teachers on two faculties at each university respectively.

Because of among other things the globalization and a focus on core competencies knowledge has become very important for the companies of today, especially for research-intensive companies. The problem is that the companies become more sensitive to how knowledge is created and spread, that is, how organizational knowledge is created. Especially sensitive are companies who are small, young and research-intensive. The purpose with this thesis is to explore how organizational knowledge is created in small, young and research intensive companies.The theory is based on a five-phase model of organizational knowledge creation and four modes of knowledge conversion described by Nonaka and Takeuchi (1995). These concepts constitute the foundation of the analytical model used in the thesis.The study is carried out by qualitative, highly structured interviews with low standardization.

This paper aims to explore the possibility of reading the Temple cleansing stories of John and Mark through Bruce J Malina?s honor/shame model, as E. Randolph Richards do. The analysis searches in John?s and Mark?s Temple cleansings for the presence of the notions of honor and shame, as Malina uses those concepts in his model.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

This essay is about the risks of reporting science through media. We have exemplified the problems with the alarm about acryl amide that came in 2002 through the diffusionist model. From the beginning it was a debate about how dangerous acryl amide is to us humans, but later on it developed to be a debate about whoever did wrong in the intermediation, because later on it came out that acryl amide maybe didn?t cause cancer at all and the scientists didn?t know how to prove if it did or didn?t. In our essay we have based our theories about how the diffiusionist model often is inadequate, with theorists as Stuart Allan, Anders Ekström and Dorothy Nelkin..

Finnhamn is a small group of islands in the Stockholm archipelago. At Stora Jolpan, the biggest island, there is a hostel. The main building was built in 1915 and is called Utsikten. The purpose of this project is to on behalf of the Archipelago Foundation (Skärgårdsstiftelsen) find alternative systems that can replace the existing heating system of Utsikten (an oil-fired boiler and electricity heaters) to a system with renewable energy. The alternative system that this project focuses on is a system of solar collectors combined with a wood chip boiler.

To explore greatly varied opinion between player and reviewer, in relation to new products in ongoing digital game series, an analytic perspective is suggested, that takes the entire game series into account, instead of analyzing games (who are part of a series) as individual productions. This is explored further by introducing a model to support this perspective, based on the game theories by Katie Salen and Eric Zimmerman, as well as Gordon Calleja. This model and chosen perspective is applied against three separate cases to see whether or not it can give insight into the approach of players (of continuing game series) and the differing opinions of players and reviewers..

Mosquitoes are found in extremely large numbers in the lower parts of the River Dalälven. In the year 2000 the mosquito nuisance was especially high, resulting in foundation of the Biological mosquito control project. Since 2001 mosquito larvae are controlled by using a biological pesticide BTI (Bacillus thuringiensis ssp israelensis). The mosquito fauna in the area is dominated by flood water mosquitoes, a group of mosquitoes that are very aggressive and form new generations of mosquitoes during every single flooding event during the summer. To be able to efficiently control the mosquitoes it is essential to know the extension and locality of the flooding.

Simulation of different systems can be done using a graphical model description of the system based on block diagrams. The simulation software Matlab/Simulink offers a lot of possibilities to describe a huge number of systems, which can be linear as well as nonlinear. The simulation using Matlab/Simulink is done by integration based on different kinds of numerical methods.When nonlinear Simulink-models are simulated, it is often interesting to apply a Kalman filter to handle the noise that may occur within the process as well as corrupting the measurement. However, application of such a filter leads to an extensive time-consumption despite using fast computers. The reason is that the existing Matlab functions are not constructed for time optimal evaluation.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

Drain water heat recovery is an uncommon measure in multi-unit residential buildings. There istechnology available for the purpose but the knowing and experience of the heat recovery systems islittle. The purpose of this thesis is to evaluate the future potential of drain water heat recovery inmulti-unit residential buildings.A major part of the multi-unit residential buildings in Sweden were built during modernismen andrekordåren (1940?1975). Many of the buildings have worn out drain and water supply systems andmany are in need of a general refurbishment.

A passive house in Norra Djurgårdsstaden drawn by Tengbom Arkitekter is going to be built. A shaft for airing is needed for a few apartments in the house.The airing shaft is designed for a few two room apartments in the house, which are not able to achieve satisfactory airing, as their outer walls are facing a single direction. The other apartments on the same floor are corner apartments. These apartments do not have the same difficulty with airing since they have their outer walls in different directions, with different pressures at the facades. The airflow in the airing shaft is supposed to be driven only by natural forces, by the sun. The purpose of natural driven forces is to achieve low energy consumption for the house.In this thesis, a design of the shaft for airing has been developed.Initially an open shaft for all apartments was analyzed.