In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The reinforcement bar that holds the balcony runs through this heel.

The purpose of this thesis is to examinethe possibilities for adding a floor to anexisting building using the two materialswood and sheet metal profiles as the loadbearing structure. An apartment buildingfrom the 60s has been used as referencehouse. Two different suggestions for thedesign are presented in the rapport. Oneof them has been analyzed with wood andsheet metal as the load bearing structure.Using the old constructional calculationsand blueprints of the existing buildings,the load bearing capacity has beencalculated. In the calculation programFEM-Design the building has been testedwith the loads that an extra floor wouldgive.

Uppsatsen behandlar bönders världsbild under två perioder, före (1796-1800) respektive efter Laga skifte (1886-1890). Studien är avgränsad till Höks Härad i Hallands län. Den empiriska undersökningen baseras på suppliker, insända till Hallands läns Landskontor och Landskansli, som analyserats och tolkats med en hermeneutisk metod. Karl-Johan Ödmans teori i vilken bondebefolkningen genomgick ett mentalt skifte mellan tradition och modernitet i samband med Laga skifte har fungerat som ram för tolkningen av materialet. Undersökningen visar att kännetecken för Ödmans traditionella paradigm återfinns i undersökningens suppliker från den tidiga perioden medan de moderna kännetecknen inte är lika tydliga under sin period.

Costs of maintenance on agriculture machines is something that many farmers has a low knowledge of, it can depend on low interest or that the farmer don?t have enough time. To make it easier for the farmers they can use many computer programs which are available on the market. In this program they can calculate their costs of maintaince on their agriculture machines, for example STANK and JTI machine calculation program. Most of this program is using Svensson (1987) costs model whish was made in Sweden in the middle of 80 decade in a large study.

The regulatory framework for constructional calculations in Sweden did expire In January the 1.st, 2011.Since then the constructional regulatory that originally were composed by Boverket (BKR) has been replaced by new common range (Eurocodes) for the entire European Union. This transition has led to changes in existing rules and standards regarding dimensioning area in Grids and has forced a need for updating to structural Engineers.The new calculation system has caused time-consuming studies of the new rules and a proper understanding of all the advice and regulations for the entire profession.This study has been carried out in cooperation with the firm "Knut Jönson Ingenjörs AB i Stockholm?, that has been affected by this transition as all other consulting firms. The firm has requested for a calculation method of wall beams according to Eurocodes. The study's focus is therefore to clarify the rules and guidelines regarding the design of wall beams according to the new regulation.

In this master thesis outage statistics covering tree years from two distribution grids are analyzed with the purpose to deduce which factors yield outages. The statistics are extensive therefore allowing in-depth analysis of both customer and system related factors. From this starting point and as a model of explanation energy not supplied is studied as the consequence and the measurement of the inconvenience caused by outages. Different methods for calculating energy not supplied are developed and studied and put in comparison to the method used in Network Performance Assessment Model, which is the Swedish frame work for regulating electricity distribution.Analysis of the outage statistics show a relation between the type category of customer and outages that can be deduced to the variance and the density associated with that customer category. Prioritization of different customer categories is elevated also in this aspect.

This paper is about skiing and Swedish nationalism during the late 19th century and early 20th century. The aim is to investigate why skiing was considered so eminently suited for the incorporation of certain ideals in the national fellowship.The paper accounts an analyse of texts and documents about Swedish skiing from 1897-1924. Skiing was a nationalistic concern from the very beginning of this period. It was connected to heartfelt feelings towards the Swedish nature, the patriotic upbringing of the youth, as well as the health of the nation. Over the years skiing also became an increased object of sportification.

Commissioned for this report is Ramboll, Bridge and Tunnel Unit in Stockholm. Theidea throughout the work has been to primarily help bridge designers compilingadvice and instructions on how fatigue verification for railway bridges in reinforcedconcrete shall be performed under the new rules, the Eurocodes.After the introduction of the Eurocodes in 2011 has major problems emerged amongdesigners around Sweden. In some areas, it differs in the calculation rules comparedwith rules from the Swedish Transport Administration and the National Board ofHousing, Building and Planning calculation. Fatigue verification is one area where thenew calculation rules are different from the past.A large part of the report has been to interpret and find the relevant information inthe Eurocodes concerning fatigue. When questions or doubts have surfaced, this hasbeen discussed with Elisabeth Helsing at the Swedish Transport Administration andbridge designers at Ramboll.The result is a report where the structure is organized in the way that the bridgedesigners can move from cover to cover and realize that fatigue verification in realityfollows the same order as the report's sections.

This essay is about the religious change that Jing-cult underwent 600-1500 A.D. It is a historical-critical essay based on literature studies, using Ha?kan Rydving?s theory of religious change. In chronological order, it will go through the religious change from ancient Japan to the late Muromachi-period when Shinto was created. It describes the early temple- cult, buddhism's mission to Japan and how the Jingikan was created.

The main purpose with the project has been to approximate the magnitude of the pollution transport from the actual road surfaces and to get an approximation of the possibility to collect the pollutants to reduce the load to the water and improve the water quality.The quantity of pollution transport from the most trafficated roads areas in Örebro city has been calculated. Roads whith a traffic exceeding 10 000 vehicle/day. The study has been done with the calculation tool StormTac. Through analysis of traffic loads and road surface, which together with a different kinds of parameters gives an approximation of the pollutant transport.The calculation has included some metals and other substances in the stormwater and has also included the present of suspended solids. Included the overall study, some smaller areas has also been calculated for the possibility to remove pollutants.The work also includes calculation for three different areas for stormwater treatment.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

Ericsson?s factory in Kumla, Modules Kumla, became a hub for radio modules and micro base stations, which enables mobile communication through radio base stations, in 2004. Because of this the factory focuses more on the logistics operations. This has led to a need to be able to plan the capacity for the materials handling system. This master thesis has therefore been performed at Modules Kumla to develop a capacity calculation model for the material handling flow during the autumn of 2005.The work has contained a mapping of the material handling flow regarding to which activities was performed and how much time they consumed.

The public interest in central living in today?s cities has led to an increasing effect of traffic noise pollution, and today 20% of the inhabitants in Sweden suffer from noise a level that exceeds the limits. At the same time the traffic keeps increasing, and recent researches shows that traffic noise pollution and several of today?s most common health issues are connected, for example, reduction of performance, sleeping issues and cardiovascular diseases. For this cause rules, guidelines and environmental goals has been developed, as well as software?s which calculates the levels of pollution, all this to investigate and improve the environment.

For the actors in the Swedish forest industry, it is important to have the ability to forecast the state in the privateforests. The information that comes out of the forecasts will be the base for the activities strategic direction.The aim in this exam is to survey what information that is present today as basis for forecast calculation, andeven to examine what other possibilities it might have in the future.From a limited geography and out of different time perspective forecast the felling potential in the privateforestry.With the word felling potential means regeneration felling and thinning. The exam will answer the questions:What information is needed to build a relevant forecast model?Is this information available today?Is there information to buy that would improve the forecast model?The result of this exam will be presented in form of a ”case study” showing the opportunities in the market tocreate a forecast calculation of felling potential in the private forestry within the Forest Owners’ AssociationMellanskogs wood-area Dalarna..

FYROM has a long tradition of producing wine. Wine production in FYROM is one of the greatest contributors of the agricultural share of their GDP. The aim of the thesis is to see if the wine production in FYROM has a comparative advantage compared to other countries that produce wine and if FYROM is able to sustain the advantage in the future. The countries chosen for comparison are Bulgaria, Croatia, France and Italy. The methods used in the thesis are the Balassa Index and Porter?s Diamond of National Advantage.