AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

The poultry red mite, Dermanyssus gallinae, is a common problem in poultry facilities, causing great discomfort for the hens and effecting the production economically. Few efficient acaricides are available and there is a need for new control methods since resistance has become a problem in some cases. The aim of this study was to evaluate the efficiency of the new liquid silica control agent Ectopar, on the poultry red mite. An initial in vitro test of Ectopar and its two components individually was performed, where live mites were sealed in together with filter paper impregnated with one of the three solutions prepared. The survival of the mites was thereafter recorded repeatedly during a period of 120 hours and compared to a control. For the field study, two poultry farms with different housing systems were used, one with furnished cages (farm 1) and one with a single tier floor system (farm 2).

To reconstruct a building is a long-term investment for farmers and it is important that people with different qualifications are involved at an early stage for making the system adapted to the animals as well the animal keeper. Therefore, ethologists who can contribute with their expertise are needed to design the system and get it to function well for the animals.A Swedish farmer who planned to rebuild her stall for tied dairy cattle to a loose-housing system for recruitment heifers for milk production asked me as an ethologist to find a system which can be fit to her existing tie-stall barn for 30 dairy cows, considering the animal needs in terms of movement, social interactions and play behaviors, and to theoretically compare the system with other systems with respect to the behaviors mentioned.The theoretical comparison between different systems was made through a scientific literature review.In agreement with the animal keeper I set out to fit a system with feeding cubicles, a system with cubicles and a system with deep straw bedding to the barn. After measurements were taken and preliminary drawings were outlined it was found that only the feeding cubicle system was possible to fit to the barn.The space provided will limit the animals to perform some playing behaviors. To decrease aggressive interactions between animals even thought a limiting area it is possible to provide partitions between resources animals compete around to prevent that more than one animal can get success to the resource at a particular place at one time. To increase the animal movement in the system the water trays were moved to the outer wall instead of kept in contact with the stalls.Although this report provides guidelines for rebuilding, other competences regarding building construction and a pre-test of the suggested building solution according to Swedish legislation are needed before the rebuilding can start.The results are directed mainly to the owner of the barn, but the literature review can be used by other cattle farmers and might bring increased understanding of the possible effects of different building solution on the animals..

This degree project has been performed with Mega Teknik AB in Landskrona. The project has resulted in a workplace for the cable installers of Mega Teknik. The workplace contains a workbench and a cart.The first stage in this project was to make an analysis of the current workplace to identify the needs the installers had.The different principle construction proposals of how the workbench would look like and which functions it would have was made during brainstorming, in groups and alone. These proposals were compared against each other using a functional analysis that has been put up to get the principle construction that fulfilled most points in this analysis.The proposal chose for further work was a cart and a bench with a module intends, the table got a formulation that creates a better reach for the installers.This proposal was generated in Catia V5 to get a better overview of the suggested proposal.During the primary structure phase drawings over all the products were made and the components were chosen. Calculations were made and the product got the dimension required.

Purpose: The essay was designed to examine what impact an increased media concentration in the provincial press may have on the society in the future. I also had the intention to create a greater understanding of the concept of media concentration and how the media groups relate to the public interest. Method: The work with this study was conducted by using methods from the qualitative methodological arsenal through interviews with, for the study, relevant informants, but also through a case report on the Stampen Group. The selection of informants had a background and a breadth which secured the credibility in this survey. The starting point was taken in previous research via a deductive approach where I tested how existing theories match reality. Conclusion: After completing this study should be noted that all respondents believe we will see a greater concentration of ownership in the Swedish media market in the future, and that it will reduce diversity. However, there are steps to take which I believe can work well in theory but perhaps not always in practice.

This report describes the construction of a climate-cabinet for testing of HV-cards (High Voltage) produced at VG Scienta. The main part of the report describes all the different components of the cabinet. The most important parts are a PID regulator from Eurotherm model 2408, a solid state contactor (SSC), a thermocouple, a finned resistor from DBK and different fans. The report even includes the connection between components by cable wiring, isolation, grounding, fuses and shaping of metal goods.As the cabinet also communicates with a computer, the report includes the solution of the data communication using the software iTools from Eurotherm. The communication part includes information about a converter that converts EIA422 to USB.The cabinet was produced at a company, called VG Scienta, in Uppsala during the spring 2010.

This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.

This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

This essay is a study of the market strategies and situations in the telephone business. Our problem was to examine the telecom companies´ strategies to stay competitive and cope with the new VoIP technology. We chose to do a qualitative study and four telephone interviews were made with Swedish and Dutch companies. We investigated three different categories of companies in the market; industry leaders, cable companies and broadband companies to get a broad view of the market. The theory chapter is based on different strategies that companies have to or can apply to get ahead, stay or survive in a hypercompetition.

Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

This master thesis was carried out at Scania in Södertälje, Sweden. It investigates the possibility of changing a connector interface that is used when there is a need for splicing the wheel speed sensor and thereby determine the consequences.The problems that exist with the current connector interface occur during assembly, as more time is required to complete a connection in a reliable manner. A complete connection requires joining the male and female connector, insert the connection into a protective retainer and then strap a cable tie on each end of the retainer. This process makes it more time consuming and it requires 20-30 seconds to complete the connection. Solving this problem would save time and enable easier assembly, therefore resulting in economical benefits.This thesis was accomplished through discussions with different sections at Scania, studying available documentations, observations during assembly, writing a requirement specification and contacting suppliers.The aforementioned methods resulted in four connector suggestions, the DT and DTMH connector from Deutsch, MCON connector from TE connectivity and MLK connector from Kostal, each of them compliant with the set demands of the surrounding environment.

The work that is the basis of this Master Thesis was performed on Scania´s group of cabdevelopment, and concerns the GPS-system in Scania´s trucks. Today, the GPS-systemconsists of an active antenna mounted on the roof of the truck. The antenna is connectedto the receiver with a coaxial cable.The purpose with this Master Thesis was to develop and evaluate a new GPS-system,where the information is distributed using a LIN-network. Today, each unit requiringGPS-information is equipped with its own antenna and receiver. This solution has beenthe most cost effective to this point.

The thesis work was conducted with the company Free2Move AB. The company is located in Halmstad and is an acting provider of wireless communications for industrial customers, mainly focused on Bluetooth? technology.In today's society most people have their music on their computer, MP3 player or mobile phone. What if you could avoid the cable between your sound system and sound source and transfer music wirelessly instead? Together with the company's engineers, I have developed a new comprehensive product for wireless music transmission.