This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

A picture says more than thousand words - an analysis of GQ Magazine´s cover images and ninth grade student´s views of them is an essay in media and communication studies covering 15 hp. This essay examines how men and women are depicted on the cover of GQ Magazine and how ninth grade students perceive these images. Our research questions are: How is gender presented in cover images? How do the students interpret these images? What possible differencies or similarities are there? Our theoretical framework is based on gender theory. Methods used are a survey conducted at Tegs Central school and a semiotic analysis of the cover images.

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.

This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

What is it that makes an audience love a character? Through comparative analysis and anevolutionary perspective, I have examined the relationship between the viewer ? the human ?and three popular characters: Shakespeare?s Bottom and Puck from A Midsummer Night?sDream and Dag-Otto Flink, the most popular character from Vallarnas friluftsteater inFalkenberg, Sweden. In what way do they attract us? Why do they attract us? The aim of thecomparative analysis between the characters was to reveal enough similarities for defining allthree as the same character type: the fool. One of the most important similarities for theevolutionary discussion was that especially Dag-Otto and Bottom are consistently themselves.Furthermore, the Darwinian perspective, especially with theories of Daniel Nettle, indicatesthat there are several factors that come into play for successive fiction.

This essay is a study of the market strategies and situations in the telephone business. Our problem was to examine the telecom companies´ strategies to stay competitive and cope with the new VoIP technology. We chose to do a qualitative study and four telephone interviews were made with Swedish and Dutch companies. We investigated three different categories of companies in the market; industry leaders, cable companies and broadband companies to get a broad view of the market. The theory chapter is based on different strategies that companies have to or can apply to get ahead, stay or survive in a hypercompetition.

How can I make art that face people in their everyday lives, which is integrated into their lives, becoming a part of the discussions both in the mundane and in the room of society? Can I do this by working with performative interpretations that are participatory driven? I have explored how artists and participants can create spaces that are both open and confiden- ce-building, and how they at the same time enable us to question established norms. How to engage in dialogues concerning social, political and existential issues like; What is freedom for me - What is freedom to you? What is it that is important? Which topics are never upraised for discussion?The project is about putting thoughts, experiences and bodies (my own, the participants and the viewer?s) in relation to each other and to the location and context they are in. It ?s about creating a broader perspective where everyone?s voice is important and can take place.

The overall purpose of this essay is to come to a deeper understanding about videos in the Youtube beauty community by using a mixture of qualitative and quantitative methods. By answering the main questions of the essay which are; What quantitatively measurable components are there in the videos that can be seen as contributing factors leading to the fact that some generate more views that others?; Is there a set mold for success containing certain aspects that a video must have to stand out?; What correlations can be found between the two categories of analysis and how do these potential correlations affect the popularity of the video? and What effects do specific components on the level of popularity of the video?, we?ve been able to distinguish differences as well as similarities on both qualitative and quantitative levels. We have also seen that using the two methods together have enabled us to reach more profound results. The main result that we have found on a quantitative level is that there are obvious correlations between a high level of popularity and a good visual quality.

Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

This master thesis was carried out at Scania in Södertälje, Sweden. It investigates the possibility of changing a connector interface that is used when there is a need for splicing the wheel speed sensor and thereby determine the consequences.The problems that exist with the current connector interface occur during assembly, as more time is required to complete a connection in a reliable manner. A complete connection requires joining the male and female connector, insert the connection into a protective retainer and then strap a cable tie on each end of the retainer. This process makes it more time consuming and it requires 20-30 seconds to complete the connection. Solving this problem would save time and enable easier assembly, therefore resulting in economical benefits.This thesis was accomplished through discussions with different sections at Scania, studying available documentations, observations during assembly, writing a requirement specification and contacting suppliers.The aforementioned methods resulted in four connector suggestions, the DT and DTMH connector from Deutsch, MCON connector from TE connectivity and MLK connector from Kostal, each of them compliant with the set demands of the surrounding environment.

The work that is the basis of this Master Thesis was performed on Scania´s group of cabdevelopment, and concerns the GPS-system in Scania´s trucks. Today, the GPS-systemconsists of an active antenna mounted on the roof of the truck. The antenna is connectedto the receiver with a coaxial cable.The purpose with this Master Thesis was to develop and evaluate a new GPS-system,where the information is distributed using a LIN-network. Today, each unit requiringGPS-information is equipped with its own antenna and receiver. This solution has beenthe most cost effective to this point.

The thesis work was conducted with the company Free2Move AB. The company is located in Halmstad and is an acting provider of wireless communications for industrial customers, mainly focused on Bluetooth? technology.In today's society most people have their music on their computer, MP3 player or mobile phone. What if you could avoid the cable between your sound system and sound source and transfer music wirelessly instead? Together with the company's engineers, I have developed a new comprehensive product for wireless music transmission.

In our attempts to understand the world, wildlife films play a significant role. Wildlife films help us to see new places and learn about animals in remote locations, that we otherwise wouldn?t be able to do. Yet wildlife films have throughout history been criticized, mainly for the ambivalent relationship between science and storytelling. While the films give us a scientific impression and say something about the ?reality?, they clearly have the intension to amuse, capture and entertain their audience.

The division of Electricity at Uppsala University is developing a wave energy converter(WEC) consisting of a linear generator connected to a bouy at the water surfacethrough a wire cable called the connection line.During extreme conditions, the wave power plant will experience forces up to 500kN, which lead to unnecessary wear and will ultimately cause the failure of theconverter. To prevent this there is a need for a damper.The wave energy converter works at a maximum efficiency when the translator?sare centered with respect to the stator. Due to tidal movements the position of thetranslator can deviate. There for a mechanical divice that will compensate for this isneeded.This report describes the further development of an earlier project where a tidalwave compensator for a wave energy converter of Seabased AB was developed.

Today almost every artist has a music video. With today?s technology it has become a lot easier for smaller companies or amateur filmers to produce and distribute their work. But how important is an artist?s music video and where do people find their music these days? Other questions we wanted to answer were if there is a typical way a music video looks like based on its genre.