This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

Background: Many authors consider knowledge to be a significant source for competitive advantage. Replicating companies found their competitiveness on an ability to leverage its knowledge base by replicating its business model in new contexts, a process often referred to as the McDonalds approach. Several authors emphasize that an efficient method for knowledge transfer may increase the risk for imitation. Purpose: The purpose of this study is to examine in an explorative manner how strategies for replicating complex knowledge systems are employed and developed. Furthermore, our ambition is to explore the notion of replication strategy.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

Too much attention has been given to mainstream approaches in performance management and management accounting research, without taking in to account changes in the environment with the rapid growth of online retailing. This paper evaluates how and/or if performance management differs in online contexts by using a conceptual model developed by Ferreira et al (2009). The model and its components are tested on three multichannel- and six e-commerce businesses. The result and its analysis is commented on by two e - commerce experts. The result shows that the operation method of the models twelve components do not differ in terms of work methods in online and offline contexts.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

AbstractPurpose:The purpose of the study is to describe the internationalization process of one firm when in a country culturally diverse from the firm?s original market.Methodology/approach:The study is a single case study which examines one firm?s internationalization process when entering the Chinese market. The approach has been an empiric interaction between empirical and theoretical data.Findings:The theory of the Uppsala model was applied to the case-company to test the model?s completeness. The authors found weaknesses and added three more aspects to the model.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

Research in solar energy is taking big steps in both solar heating and solar electricity. It´s not only the technologies alone, but also the combination of both solar electricity and solar heating which is what is called a solar hybrid. The idea of a solar hybrid is that a solar cells efficiency decrease with increased temperature and can with help from a solar collector be cooled and the heat can be utilized. This thesis report compares heat production and electricity production with respect of, in first hand, a solar hybrids geometry in the cooler. The theory chapter describes solar heating and how different solar cell technologies work and their environmental impact at the production and how compatible these technologies are for the solar hybrid.

Aim: The purpose of this study is to show models from the literature which can underlie appraisal and development in the real estate business of Gavlegårdarna.1. Gavlegårdarna should be able to use the study in their work with quality assurance off their services.2. Company?s in real estate business and other students should be able to use the study for an overview of quality models.Method: To collect data I chose to use a qualitative method based on the hermeneutic research method. The collected data was a result of literature and interviews.Result & Conclusion: From the literature there are two models that are suited for analyses of quality, that is the Housing quality model and the Gap model.

Intelligent IT-based solutions, often called Smart Grids, are considered to be the future balancers of renewable energy sources. One area within the Smart Grid concept is called demand response, which is focused on making customers more consumption flexible by making them more active in their consumption. In this thesis the aim is to analyze a business model by investigating the income potential for a demand response solution as well as its market potential. This has been done through literature studies, interviews and development of a computational model.The use of 5000 households with flexible consumption can provide a cost reduction of 17.2% or 2.4 million SEK for a balance responsible party during an average year. If the solution is used to make strategic bids on the regulation markets the study indicates that the largest potential for revenues lies within this strategy.

The credit rating industry is a complex and fascinating industry. Its history stretches back more than 150 years and has gradually increased in importance. During its history the dynamics of the industry have changed. The extended-principal-agent model was developed by synthesizing different principal-agent-relationships into one model. This model provides a holistic understanding of the credit rating industry and illustrates the interdependence between the different relationships.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The purpose of this thesis was to analyse, model and finally generate dynamic vehicular motions in a train. The objective with the analysis was to find important motions for a realistic train experience. The motions from the analysis were then weighted against possibilities for generation in a motion platform.A dynamic motion model was created to model the selected motions. The model was implemented in a simulation environment, more specifically MATLAB/Simulink. The simulation environment was used to simulate the model and to generate outputs to control a motion platform.

AbstractThis study examines the technologies appropriate in developing back-and solutions for search-driven user interfaces of e-commerce sites. The study is based on existing research in search-driven user interfaces of e-commerce sites from a design point of view, but instead the focus of this study lies within a back-end perspective. This choice of focus is a result of the gap that was encountered within research and other literature when it comes to general advice in how e-commerce sites best should build back-end solutions to support search driven user interfaces. The technologies that have been examined and compared are traditional relational databse management systems (RDMS) and the newer so called No-SQL database management systems, and also traditional search engines and the newer variant s of search engines. The study concludes that in some cases it is appropriate to combine traditional and newer technologies when it comes to databases, while the comparison of search engines indicates that there are some newer search en gines that have the ability to meet more of the needs that can be identified on the back-end solutions.Primary data consists of interviews made ?face to face? with experts on the subject and questionnaires addressed to selected e-commerce companies via e-mail.

Some people do not have the opportunity to visit a physical exhibition because of limited time or long travelling distances, it is here the need for a web-based exhibition arises.This dissertation describes the development of an interactive web-site representing a part of a physical exhibition of over 200 interviews on different peoples immigration to inner Scandinavia. The interviews contain text, audio clip, pictures and video clip.The website contains modern programming technologies such as HTML5, ASP.NET MVC3, SQL, JavaScript and jQuery.A cover of the technologies used and how the project has been designed and implemented is explained in the dissertation. In the end of the dissertation we discuss about how the result of the project follows the goals we set up in the start phase. The result of this project is an interactive and easy to use web-site showing a part of the physical exhibition online. An easy administration to insert new information and edit existing without any major computer knowledge..