The purpose of this study is to examine whether there are any key factors for success to look for in launching a new business that affects the subsequent performance of the venture. Further on, the study will examine if there are any differences between believed and actual factors for success for an entrepreneur and the key factors for success given by existing theory. The purpose of looking in to the assumed gap between existing theory and entrepreneurs? believed and actual factors is to distinguish factors that make start-ups evolve. It is then important to investigate how they have worked with their business start-up and how they have worked with key factors for success in order to understand the impacts of their decisions.

 Den här studien integrerar tidigare litteratur om Internationella Joint Ventures (IJV) som belyst variablerna ägarskap/kontroll, trust och performance och undersöker deras samexisterande betydelse för ett bra presterande IJV. Uppsatsen är utformad som en metaanalys som kombinerar kvalitativa och kvantitativa studier och ämnar se huruvida ägarskap/kontroll har betydelse för ett IJVs performance. Detta genom att studera dess indirekta påverkan genom variabeln trust. Resultatet av studien visar att ägarskap/kontroll och trust influerar varandra i ett IJV samt att trust påverkar ett IJVs performance. Slutsatsen blir därmed att ägarskap/kontroll får en indirekt betydande roll för ett IJVs performance..

The Airsoft Community always search for realism and optimal performance.When the performance and/or the realism in your AEG1 aren?t enough you turn to modifications toimprove the weapon. But to manufacture such modifications isn?t that easy, hence you turn tocompanies that are specialized in creating such devices.The goal with this project is to create a prototype of a modification called ?Programmable MOSFET?and targets optimization of the electrical components within the AEG. This means that you digitalizethe control of your AEG thus entails new functions and more stability to the system that isn?t possiblewith its mechanical predecessor.A prototype has been manufactured and programmed with functions according to requirementspecificationsthen it was tested on an airsoft-gearbox with rewarding results.

The acoustics in a control room is a complicated phenomenon. Early reflections, reverberation time and area in the room are some of the problems. This report is about the reflection on the mixing console in a control room. The control room being built, these reflections are difficult to take into consideration since the mixing console is one of the very last items you place in the room. This report will explain three main measurements that were done in order to get the answer to the following question: Does the mixing console interfere the frequency curve at listening position? Three measurements were done and the difference between the measurements was that the microphone and the loudspeakers were placed in different places in the control room.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

ProblemPerformance management på individnivå innebär att styra individen utifrån individuella mål som förmedlar organisationens övergripande strategi till medarbetarna. För att förstärka styreffekterna av individuella mål kan en belöning kopplas till måluppfyllelsegrad. Effekten av ett bonussystem ställer stora krav på samarbete mellan chef och anställd då de tillsammans ska ställa upp realistiska mål som syftar till att utveckla den enskilde individen samtidigt som de bidrar till organisationens övergripande mål och resultat. Därmed är det viktigt att undersöka hur medarbetare och chefer påverkas av individuella mål kopplade till bonus och vilka effekter detta får inom företaget. Vilken effekt har målsättnings-, uppföljnings- och utvärderingsarbetet på styrning och motivation bland medarbetare och chefer?SyfteSyftet är att undersöka och öka förståelsen kring hur styrning och motivations-aspekter påverkas då performance management bryts ner till individnivå samt hur en belöningskoppling kan förstärka den eventuella styreffekten.MetodUndersökningen har genomförts i form av en fallstudie där intervjuer använts som främsta empiriinsamlingsmetod.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The aim is to describe the factors that influence nurses' assessment and measurement of pain in patients. Literature study based on 13 reviewed articles, searched in the Cinahl. Qualitative and quantitative articles were analyzed. Six themes were identified that can be seen as the factors that influence nurses' assessment and measurement. The themes were   pain education, nurses´ experience in the profession, nurses´ level of knowledge about pain relief, documentation about pain, nurse´s perspective on the patient, and pain measurement.

This report is a qualitative interview study which central content enlightens how movement and sports effects children?s performance in school. With the help of five different teachers in three different schools questions like; how does movement effect the performance of children in school? Have been answered.Lots of research and litterateur shows that children is doing better physical and mental, the concentration level is improved and the performance in school is better when exposed to more movement, also there are less conflicts and the students gets better motor skills.Comparison with the ?Bunkefloproject? has been done, which was a project in the south of Sweden where they let the children have physical education every day and then they examined how this effected their performance in school. With this basis this report will examine the teachers view on the subject.The result shows that the teachers think that there should be more movement in the daily schedule for the children because they seam to be more happy and concentrates better after movement.

This thesis deals with query formulation in full text retrieval. The variables studied were query expansion and query structur[INS: e :INS , and the aim of the thesis is to study their co-effects on retrieval performance in a probabilistic system. The expansion was made with synonyms, and the structure by expressing facets and phrases. The study was performed using QPA, Query Performance Analyzer, which includes InQuery retrieval system and a sub-collection of TREC documents with its topics. The measurement used was precision at 11 DCV points.

The Energy Performance Certification in Sweden was developed as a tool to achieve the Government's target to reduce Sweden's energy consumption by 20 percent by 2020. The Energy Performance Certificate has previously received some criticism for not fulfilling its purpose. Questions that formed the basis for this report is how the energy performance certification provides support to buyers of single-family houses and if the energy performance improved in terms of reliability. The report begins with a background description that describes how the energy declaration works and some of the findings of previous evaluations and surveys. A survey to investigate the broker's position to energy performance have been conducted as well as interviews with buyers and sellers of houses. An investigation whether the energy performance can vary between different calculation programs, depending on various assumptions made by the energy declarant, has been made.Brokers and sellers have proved negative attitudes towards energy performance, particularly brokers.

Många av de verktyg som används för mätning och styrning av prestationer i offentliga organisationer är hämtade från privat verksamhet. Dock har offentliga organisationer ofta andra typer av mål och styrning än privata företag, vilket försvårar måluppföljningen. Denna uppsats syftar till att få en förståelse av Trafikverkets användning av prestationsmätning samt tillämpning av mål- och resultatstyrning. Vidare kan studien ge ett bidrag till ökad kännedom kring hur mätning och styrning av prestationer sker inom en statlig organisation. I en fallstudie som innefattar intervjuer och dokumentgranskning studeras hur mätning och styrning av mål fungerar i Trafikverkets största investeringsverksamhet.