This thesis work has been performed at the Division of Assembly Technology at Linköping University for a period of ten weeks. The work is part of the project ProFlexA, which is a research project in collaboration between Linköping University, Lund University, and industrial partners such as Combi Wear Parts and Smålands Stålgjuteri AB.The casting process creates random incurred burrs and defects, which must be removed during a cleaning process to make sure that the cast can be sold. Automation has long been sought for the cleaning of castings due to, among other things, poor working conditions for staff, but this has proved difficult to implement with today's technology. Automation has for some time been available for more capital strong companies with large annual volumes, but for smaller companies with small-and medium-sized volumes, automation has not been an option.The goal of ProFlexA is to develop an automated cleaning cell aimed at small-and medium-sized volumes.The goal of the thesis is to do a pre study at ProFlexA?s partners on cleaning of castings, and develop concepts for automated cleaning of castings.By recording the process and cycle times, the cleaning of castings has been documented as it works today, and on this basis, information and statistics has been compiled.

The report describes a measuring method for analysis of energy consumption measurement in microwave ovens. Concurrently that the awareness of the environment evolves the demands are growing for more power saving products. This is also counting within the Home Appliance business, which is Whirlpools business area. Whirlpool is therefore interested of launching microwave ovens with documented low power consumption. To be able to implement this, both asserted measuring equipment, that fulfils all demands, and a standard procedure is required.

The purpose of this thesis is to examine how key performance indicators are being used as performance management tools within the production industry. Specifically the purpose is to investigate how the KPI:s within the telecommunications industry drives reusability regarding production test systems. This thesis will also highlight today?s cost models and suggest improvements of the KPI and what new ones could be introduced. A case study at Ericsson AB has been performed.

In order to accomplish that a construction is correctly built, it is critical to obtain a well functioning control mechanism throughout the project. The way to enable this is not by having an independent inspector constantly at your side. Today it is praxis to use check lists and have people responsible of quality to make sure that these are followed. This is where discretionary inspections play their part. These among others are documents needed to com-plete the check list.

ABSTRACTTitle: Senses strategic importance to the customer experience in dressing roomAuthors: Anna Andersson & Alexandra LundqvistTutor: Dr. Bertil Hultén, Associate Professor Linneaus School of Business and Economics Linnaeus UniversitySubject:  Bachelor thesis 15 hp. Business Economics C, Marketing. Linnaeus University, spring 2011Presentation of the question: Is it possible for companies to enhance customers experience in dressing rooms by strategically working with the senses?Purpose: The purpose of this paper is to describe and analyze the senses relevance to the customer experience in the dressing room and create an understanding of the dressing room from a customer and business perspective.

This paper aims to explore the possibility of reading the Temple cleansing stories of John and Mark through Bruce J Malina?s honor/shame model, as E. Randolph Richards do. The analysis searches in John?s and Mark?s Temple cleansings for the presence of the notions of honor and shame, as Malina uses those concepts in his model.

In this report you can read about a service company that wants to introduce a new decision tool for their customers. The first question that will be answered in this report is, what information is needed for market controllers. The second question investigates how a decision tool that gives the answers to the first question would work. Theories in business and economics written by Jan Lindvall (2001) and sociotechnical work analysis written by Kim Vicente (1999) are used in this report. To find the answers to question number one, interviews with two market controllers were done.

This master thesis starts in a wondering about the visions and ideas we have about thecity and about the urban. In Swedish about the term stadsmässighet, which can be translatedin to city-like, urban or urbanely, something that describes or contains features ofthe city. How do we use the city as a role model? Is urbane building the same as buildinga city? Is it about architecture and aesthetics or is building urbanely the way to makepopular cities? The central aim of this essay is to study visions and reality around urbanebuilding in order to understand the concept?s meaning and how it changes. My ambitionis that the essay will function as a discussion basis for students and planners.The work starts with literature studies where theoretical definitions and concepts aboutcities and about the urbane is investigated.

Companies today are exposed to a turbulent market with fierce competition and the ability toinnovate itself becomes increasingly important. But what innovation is and how it is managed is farfrom obvious. In this case study at EVRY the research questions are: ?What is innovation in ITconsultant companies?? and ?how can innovation be managed in IT consultant companies?? ITconsultancy is a complex type of business and their focus is often to innovate the customers businessrather than their own. The study is based on a literature review, field studies, unstructuredinterviews and an interpretive analysis.

Företag använder sig alltmer av ekonomisk information för att motivera sina anställda till ökad prestation på arbetsplatsen. Teorin menar att spridning av ekonomisk information medför delaktighet och på så vis blir motiverade att göra sitt yttersta på arbetsplatsen vilket i sin tur ska medföra att företagens effektivitet ökar. Är tillhandahållande av ekonomisk information en motiverande faktor? Studien visar att tillgång till ekonomisk information gör att de anställda känner sig delaktiga men att det inte alls behöver betyda att motivationen ökar. I vår studie har därmed har inte heller motivation genom ekonomisk information någon betydelse för företagets effektivitet..

This paper aims to explore the possibility of reading the Temple cleansing stories of John and Mark through Bruce J Malina?s honor/shame model, as E. Randolph Richards do. The analysis searches in John?s and Mark?s Temple cleansings for the presence of the notions of honor and shame, as Malina uses those concepts in his model.

This master´s thesis in Library and Information Science examines the experiences of children who read to a dog. The purpose of this thesis is to examine the interactions between the librarian, the readingdog-handler, the child-ren and the dogs and what the benefits from the interactions might be. The aim is also to examine how the child-ren express their literacy during the readingsessions and how to develop the readingsessions at a specific library. The author follows a reading dog project for seven weeks, in collaboration with a specific school and library. Action research was used as a research strategy, and since action research is done on the basis of practice, a coll-laboration with the participating children, the librarian and the readingdog-handler was significant in this study.The theoretical framework concists of theory and concepts from the sociocultural theory developed by Ro-ger Säljö, and human-animal studies with concepts from Donna Haraway.

Bakgrund: Debatten om Corporate Social Responsibility (CSR) har pågått i över 40 år och har under de senaste åren blivit allt mer aktuell även i Sverige. Detta till följd av dels de ökade krav som medarbetare och konsumenter ställer på företagen och dels på grund av en ökande internationalisering, en snabbare informationsspridning och ett hårdare företagsklimat. Idag finns flera exempel på företag som kompletterar målet om att maximera vinsten med ett mål om socialt ansvarstagande. Samtidigt strävar dagens marknadsförare i allt större utsträckning efter att skapa holistiska marknadsförings-aktiviteter, med syfte att bygga ett starkt varumärke som kan skapa konkurrensfördelar. Syfte: Denna uppsats har till syfte att öka förståelsen för CSR:s påverkan på ett företags varumärke.

Title: How to manage stress seen from a leadership perspective Authors: Lina Jonsson, Kristian Olsson, Mattias Olsson, Shabnam Tahajjod Supervisor: Marie Aurell Department: Department of Business Administration, IEM Course: Bachelor thesis in Business Administration, FEC 007 Question of issue: How can we understand stress managing at a workplace seen from a leadership perspective? Method: We have chosen a qualitative method for our thesis with inter-views as qualitative data collection. The interviews had a low grade of standardization. Result: On the basis of our question of issue we have drawn the con-clusion that it is important to create comfort at the workplace, that there are a safety and a feeling of handle the work tasks and that there is a plentiful information flow between managers and employees to manage to handle the workplace stress situa-tion..

 Saab Microwave Systems (SMW) is a business unit within Saab AB that manufactures and develops different types of radar- and sensor systems for naval, airborne and ground based forces as well as within the market for civil security. In addition to the manufacturing of radar and sensor systems they also provide different types of service concepts. The business unit has 50 years of experience within the area of developing radar systems and is considered to be one of the market leaders. When applying an assemble-to-order production strategy with products at this level of cost price the product lead-time is vital and becomes an important part of the strategy within marketing and sales. Within SMW there is a new department called Supply Management (SM) that provides the supply of incoming and outgoing material. Within SM there are four sub-departments working with activities such as planning, purchasing, receiving inspection, storage and distribution.