This rapport contains an examination of the energy consumption of a kindergarten, which areas that have the largest impact on the energy consumption and what can be done to reduce those areas in ways that are relatively easy and profitable. It is also analyzed if it is possible to reduce the energy consumption from today?s consumption to a consumption that fulfils the demands placed on low energy houses by FEBY.The focus has been on reducing the energy consumption of the areas ventilation, heating system and hot water system, since those seemed to be the easiest ones to affect and since the building is quite recently built.There are different kinds of ventilation systems, at the moment the building have a CAV-system, which means that the ventilation is too high during large parts of the day. There are different ways to manage the ventilation system, for example presence detection, humidity sensors, CO2 sensors, temperature sensors and season adjustment. Many of those are in the end dependent on CO2 sensors to guarantee a good indoor climate, therefore the focus have been placed on this system.

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.

The purpose of this thesis is to describe what Building Information Modeling, BIM, could mean for landscape architects, and also hopefully to make sense of the possibilities and problems of the system. BIM is about virtual design and is based on all consultancy groups in the design team modeling in 3D. Intelligent objects and metadata, such as price and material, are used. The project group has a common interchange format for simple sharing of information. To get an idea of how the situation with BIM for landscape architects looks like today, I collected information mostly through interviews.

Detta examensarbete har utförts i samarbete med Löfqvist Engineering i Örebro. Uppgiften har varit att utföra en simulering av en stor automatiserad produktionslina som ska användas vid tillverkning av avgassystem till lastbilar. Utifrån denna simulering skall exakta cykeltider för produktionen bestämmas. Dessa tider kan sedan användas av Löfqvist Engineering för att verifiera tidigare uppskattade tider.Arbetet inkluderar en litteraturstudie om Lean Production och hur det fungerar ihop med automation. Det finns även med lite bakgrundsinformation om Just In Time, olika filformat och robotsimulering i allmänhet för att ge en bättre överblick av ämnet.Programmet som har valts för att utföra simuleringen är Tecnomatix Process Simulate och den inbyggda Line Simulation modulen.

The gaming market has become the fastest growing market for leisure and is one of the most popular forms of homeentertainment. This has generated a media debate about how people are affected by gaming and concernes how we are affected by the violence that may occur in games. Games proponents argues that gaming is the future of teaching and computer games are becoming a sustainable and popular instruction strategy. Some studies have long used computer games for educational purposes. By interviewing high school students in focus groups as qualitative research, I studied their attitudes towards computer games as a learning tool.

This bachelor thesis addresses the problem of appeals against house building in Gothenburg. The thesis investigates whether there is a statistically significant relationship between demographic factors and the occurrence of approved, appealed and revoked permits for new construction of residential buildings in the ten districts of Gothenburg. This is done with a correlation analysis. The report also investigates whether there is a statistically significant regression in the same demographic factors and how these individually affect the average processing time for appeals in the districts. This study is done with a multiple regression analysis.

The so called ?ByggaF-method? is a relatively new Swedish method to stop moisture from being built into a building. The method should prevent damages on buildings as a result of mould growth and moisture. The purpose of the method is to include moisture control in the entire constructionprocess, from the projecting phase and all the way to the management phase. Up until now, there is no proof if the method is profitable or not and no studies have been made on the topic.

The first part of this essay is about a single-family house that we have planned and projected. Thesecond part is a deeper study in ways to further insulate windows when they are not in use.In the first part the building?s design and its most important construction elements are described.The planning of all major installations (heating, domestic water, ventilation, sanitation, electricity)are reported so that one can in principle start construction of the house. In addition there arecalculations done on the building?s energy management.The result is a two stored house angled toward the south.

Det här är resultatet av ett examensarbete utfört vid Mälardalens högskola i samarbete med Iggesund Paperboard AB. Syftet med examensarbetet var att se om det är viktigt för ett företag att ha tillgången till en gästgård men även till hur de är utformade för att fungera för den typen av verksamhet.En gästgård kan ses vara viktig för ett företags representation. Gården används främst som ett tillvägagångssätt för att sälja företagets varor och tjänster men ger också en god möjlighet till att knyta starkare band mellan kunder såväl som mellan företagets egna arbetstagare.Anledningen till att det här examensarbetet utfördes var för att företaget såg det som ett behov att se över om dessa gästgårdar var värda att bevara och utveckla i framtiden. En utredning gjordes därför genom besök och jämförelse av tre olika gästgårdars verksamhet och utformning för att se hur viktig en sådan gård kan anses vara för ett företag. Som ett resultat av denna utredning har därefter ett förslag till en utformning av en bättre fungerande arbetsmiljö vid Hedvigsfors Herrgård tagits fram.

This thesis is the result of the investigation and solution of a mechanicalproblem regarding flywheel malfunctions. A flywheel is, in short, a devicethat relies on a rotating object?s moment of inertia to store energy overshort time spans. This project is part of the development of a fourthflywheel prototype at the division for electricity at Uppsala university,which uses magnetic levitation to keep a hollow cylinder rotating at veryhigh speeds inside a vacuum chamber. Should the magnets fail however, orsome other error occur that leads to an uncontrolled state of rotation, thecylinder needs to be stabilized mechanically by a device usually referredto as ?back-up bearing?.

This thesis concerns how Sweden relates to life cycle assessment (LCA) in the construction process. LCA means analyzing a products impact and the analysis includes the whole life span of the product. A building has a high complexity and the combination with its unique shape will make the LCA more comprehensive, unlike e.g. aluminum cans. Recently there has been a development of a working procedure in the construction industry.

Good comfort for the driver of a construction machine is crucial. Gearshift comfort is an important part of the total comfort. Volvo Construction Equipment Components has a simulation environment of the powertrain, SimPow, which is implemented in Matlab/Simulink. SimPow is mostly used for simulation of control strategies and performance. In order to be able to study gearshifting comfort, Volvo has an interest in developing new models for SimPow.

IT-användandet i byggbranschen har banat väg för nya, effektivare arbetssätt och det finns visioner om hur det ska fungera. Syftet med vårt examensarbete är att ta reda på byggbranschens användande av, och vision om BIM. Vad är BIM ? Building Information Model?Kort beskrivet är BIM en modell där all information för ett byggprojekts hela livscykel kan hanteras. BIM förenklar det fortlöpande arbetet genom hela byggprocessen genom att tillhandahålla information om projektet som är relevant, uppdaterad, integrerad, fullt koordinerad och av hög kvalité.

Quality assurance of construction projects and create effective ways of working, is intoday's pressed position, major objectives for building contractor companies. This thesis is an attempt to see if it is possible to achieve these goals with the new modern tool iPad.The author of this thesis has during the latter half of his one year practice work in Uppsala for the Swedish building construction company NCC Construction Sverige AB, conducted a study on the possibility of using the iPad on an construction site. This has been done with active field studies in which applications have been tested and also the supervisors receptive. The usability of the iPad has always been in focus since it is important that the applications are easy to use and easy to learn.The results of the work, as presented in this report, points at opportunities in efficiency if the iPad is introduced and used on construction site. There are many useful applications for the iPad, and with a system that can handle the synchronization between the iPad and the computer, the workflow will be streamlined significantly..