At Volvo Cars Torslanda's paint shop there is a requirement to in a fast and effective way get an overview of the plants capacity. Therefore a capacity template was constructed as a tool for the engineers at Volvo several years ago. This template has during the years become complicated and outdated. Thus this thesis work will resort as a new capacity template, built from scratch. The new template has been built up based on requirements from Volvo and the concept of OEE (Overall Equipment Effectiveness).

During the 1990?s a large number of building projects were revealed where lack of moistsafety precautions during the construction process had led to extensive moisture damage. Alsoresent implemented studies have shown that the problems with moisture damages have ratherincreased than decreased during the past few years. Moist is considered to be one of the mainfactors to cause unhealth due to deficiencies in the indoor-environment and does also causeunnecessary expenses and a reduction of the confidence in the construction industry.In this Bachelor of Science thesis three projects have been reviewed to examine how moistsafetyhas been observed during the construction process. Main focus has been to identify thebuilding components that are the most exposed to moist, and to examine how they have beentaken into account during the period of design and construction.

This thesis intended to examine how small enterprises within the retail industry work with brand building of their corporate name. More specifically it intended to examine how they do to choose corporate name and corporate logotype, and how they work to create a desired corporate image. A case-study was performed with three case-companies from different industries. The method was deductive as the empirics were brought in with starting-point in the theoretical frame of reference. The study showed that there are differences in the way small enterprises within the retail industry work with the brand-building of their corporate name.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

This project is based on my fathers farm which lays outside Löberöd, twenty kilometres south of Eslöv in Skåne. While my family for some time have thought about building a new milkingstable with AMS(Automatic milking system) I decided to compare the AMS with a conventional milkingstable. We are abit concerned about how many cows we should have in the new stable. Because of that I calculated with two different number of cows. I have compared three different types of milking stables: One alternative is 180 cows milked in a double eigth hearing bone milking stable. The second alternative is 128 cows milked with two DeLaval VMS-robots. The third alternative is 171 cows milked with three DeLaval VMS-robots. One salesman from DeLaval and one salesman from A-betong helped me to get marketprices on the milkingrobots, building, ventilation and prices on all the concrete. In all the costs labour is included. The rest of the costs are calculated in a softwareprogram called K-data 03 which is a program with predicted costs. The calulations from the program showed that the price in the milkingpit system was 51 000 sek per cow.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The aim of this study was to explore and gain understanding of the situation between managers in different forms of human service organizations. I chose to use a qualitative method and conducted semi-structured interviews with five professional middle managers in the public sector. To accomplish my purpose, I worked on the basis of several questions. The questions dealt with the role of middle management and what it involves, how it is perceived and what the middle managers think of the specific requirements for them and their leadership in organizations that provide services relating to people.  As a result of the analysis I have used the theory of social roles that describes the meaning of the different roles and role conflicts that arise in connection with various and conflicting expectations. The review of the results shows that middle managers in human service organizations experience to have to deal with a complex leadership role.

The regulations for energy consumption are consistently getting more and morestrict. This leads to a higher customer demand for energy analysis early in the buildingdesign process. Many building planners and architects use powerful modeling softwareto visualize their projects. These digital models contain sufficient information aboutthe building?s physical characteristics for reliable energy analysis.

The following study explores the relation between psychosocial work environment and individual health. The purpose is to examine how female employees in the occupational health sector experience their own psychosocial work environment, focusing on different influencing factors in both the workplace and their private life regarding the employees own health. The study applies a hermeneutic approach in which qualitative interviews constitute the empirical data. Previous research on this particular subject has focused on the following themes: the combination of work-family life, demand/control model and flexibility in the workplace in relation to health and stress. The theoretical framework used in this study integrates relevant concepts, specifically SOC, poor leadership and flexibility.

A problem in the field of district heating is the oil burners needed to provide power when a peak load occurs. One possible way of reducing the needed amount of oil is to reduce the power demand for space heating in the district-heating substations when the need for district heating water exceeds a certain limit. This can be done by use of a locally working controller function.In this Thesis the options concerning load priority are evaluated. To evaluate the potential for using controller functions concerning peak load priority an experiment was brought out in a chosen district-heating substation. The impact on the indoor thermal comfort during a heat reduction was also taken into account.

This diploma work on D-level is made in cooperation with Varnäsföretagen AB in Eskilstuna. The company performs contract manufactured aluminium goods. This work is a continuation on earlier diploma work in Varnäsföretagen AB. Even if the industry process consumes much energy for melting the aluminium goods, they consume a great amount of oil to warm up the building. The purpose of this work is to examine some places in the building and the process to see how much energy it is possible to recycles to the heating system and reduce the costs for heating.

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better productivity. In conclusion, the report author tries to demonstrate what can lead to increased productivity and improved work experience..

Mitt mål var att skapa västra söders identitet och samlingsplats, vilken helt saknas idag. Utmaningen var också att transformera Hornsbruksgatan från en baksida till en tillgänglig plats. Högalidsparken förlängs ner till gatunivå - Hornsbruksgatan blir en blandning av park/ torg genom ett specifikt grönt plattsystem. Nya stråk och ramper binder ihop nuvarande gatu- och parknivån. Bebyggelsen är småskalig och nätt, ändå är programmet större än förslagit proram.

Title:Balanced scorecard in the public sector - the balancing of conflicting objectives.Level:Final assignment for Bachelor of Science in Business Administration.Authors:Erika Sundström and Lisette Lundstedt.Tutor:Stig Sörling and Tomas Källquist.Date:2014-05-20.Purpose:The purpose of our study, from a management perspective, is to increase understanding of how the public sector can develop and use the balanced scorecard to balance conflicting objectives.Method:Hermeneutic approach, Literature review, Qualitative case study.Result and conclusion:Under certain conditions, the balanced scorecard can help to deal with conflicting objectives in a public organization. Stakeholders and objectives are important factors for a balanced control. This is due to the fact that many different stakeholders often leads to the creation of conflicting objectives. Numerous and unclear objectives lead to both conflict and uncertainty. The organization?s structure and culture are other factors that also influence.

The main aim of this research is to survey the general colour scheme for private dwellings inVisby, built 1860?1930. During this period the visual appearance of the town of Visby changedsubstantially, since the increased local production of lime led to the plastering of many woodenbuildings. Which colour schemes were chosen for the different building types of the historic centreof Visby, and which colours came to dominate the time period? The methods used for answeringthese questions have partly been field studies on site and sampling of selected buildings, andpartly critical reading and observation of iconographic material (paintings, drawings, aquarelles,postcards and photographs).