The project Design analysis and proposals of plastic screw caps in Australia was performed at Högskolan Dalarna incooperation with University of Western Sydney, Australia. The Swedish company Tetra Pak, in Lund, were assigner forthe project that was performed 2006-2007. The commission was to do a survey about the packages for non-carbonateddrinks in Australia. The bottles had to be plastic, able to open in one step and with focus on the caps.The project has result in design analysis and a new proposal of a plastic screw cap for the Australian market. Sixbottles were choosen and they were all testet on 20 consumers each with a Likert-scale test.

This study has been carried out in cooperation with Unilever and partly with the EC founded project, Smartdoc IST-2000-28137. In areas of statistics and image processing, both the amount of data and the dimensions are increasing rapidly and an interactive visualization tool that lets the user perform real-time analysis can save valuable time. Real-time cropping and drill-down considerably facilitate the analysis process and yield more accurate decisions. In the Smartdoc project, there has been a request for a component used for smart filtering in multidimensional data sets. As the Smartdoc project aims to develop smart, interactive components to be used on low-end systems, the implementation of the self-organizing map algorithm proposes which dimensions to visualize.

My objective for this project was to create a short but thrilling 2D-animation intended as promotion for an online comic book. The purpose of the project was to learn more about animation and graphics, to further my artistic skills and to learn how to work in Adobe After Effects. I also wanted to learn more about scheduling, project methods and how to handle stress. During the ten weeks of the project I have created the story, the storyboard, the character design, the backgrounds and the animation. The voice over was recorded with the help of a fellow student who also made the music and the sound effects.

IT is a natural part of the work today when it comes to projects. There are many aspects that are wholly or partly dependent on IT support actions to proceed efficiently. Although there is still situations where IT is deselected as a tool. The factors that make it look like this is not always included in the calculation, which resulted in the failure that could have been remedied with the right tools to solve the problems. The project form which today is increasingly common with all major groups involved enables IT tools' impact also becomes an increasingly provided they are used properly.

Trafikverket vill ta reda på hur de skaimplementera BIM (Building information modeling) som ett arbetssätt i sinorganisation vid projektering, byggande och förvaltning. Syftet med det härexamensarbetet är att ta reda på hur Trafikverket kommunicerar med BIM-modelleridag och hur man kan utvecklas.Det är få människor i anläggningsbranschen som idag har erfarenhet av att arbeta med BIM. Även i de projekt som jobbar med BIM idag så behövs det alltid en BIM-samordnare som håller i trådarna. För att få ett bra slutresultat så måste kommunikationen i ett projekt fungera bra. En förutsättning för detta är att alla inblandade parter har samma mål med projektet, t.ex.

The project Design analysis and proposals of plastic screw caps in Australia was performed at Högskolan Dalarna incooperation with University of Western Sydney, Australia. The Swedish company Tetra Pak, in Lund, were assigner forthe project that was performed 2006-2007. The commission was to do a survey about the packages for non-carbonateddrinks in Australia. The bottles had to be plastic, able to open in one step and with focus on the caps.The project has result in design analysis and a new proposal of a plastic screw cap for the Australian market. Sixbottles were choosen and they were all testet on 20 consumers each with a Likert-scale test.

Construction waste from the housing industry includes all unnecessary consumption of building materials. The definition of construction waste is construction materials that has not been built in and becomes waste. Constructions waste can be divided into two types of contributions: operational and work site contribution. Some of the common construction materials in housing industry have such low usage level as 75 % and the rest becomes construction waste. Low usage of construction materials creates unnecessary costs and has a major environmental impact.

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

This is a non-traditional examination paper written after three years of studies at Malmö University and the Kaospilot Program. It is written in Swedish and in the spring of 2009. It describes a non-linear project based on a process-orientated theory called Theory-U by Otto C. Scharmer (2009). The project aims to investigate the changing conditions of Stage Theatre and deals with non-linearity as phenomena.

The paper is a thesis made by three students in the engineering program at Jönköping School of engineering. The thesis was overseen by the urban planning office and features data from Jönköping County.The purpose of the thesis is to improve future central districts by improvement of work methods. The aim of this thesis is, through an evaluation of process mapping, develop a model for systematical work methods with better experience feedback in the urban planning. The following three questions have been answered:? How is the process mapping of the urban planning in Jönköping County built today and how did it affect the current district Kålgården?? How can the urban planning of Jönköping improve with a more systematical work method with better experience feedback?? How can critics elaborate the developed method to make it enough stable and in general applicable method to enforce on future districts?Literature studies and interviews were made to review the work methods of the office of urban planning as well as how their experience feedback works.

This thesis has evaluated environmental classifications of projects and the lessons learned to explore what the possible ramifications of implementing this in the construction and infrastructure are. Companies today are looking to develop methods to demonstrate their environmental commitments, but there is an uncertainty regarding the contribution of environmental classifications in this aspect.The literature review presents the theory of environmental classification, which provides a general knowledge of its function. The empirical data is based on an analysis of existing classification methods and qualitative interviews. The analysis shows specific environmental classification system for the area of construction and infrastructure. CEEQUAL is currently the only environmental classification applicable to Swedish projects and therefore serves as the basis for the continued analysis.

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

This paper describes a case study of the largest film production ever conducted in Scandinavia. The study aims at explaining the complex relationships in the network structure in which the project took place. Coordination of creative projects carried out in a network context, includes handling conflicting interest and contradictions. Creativity needs space and freedom while projects need structure and coordination, whereby controlling these projects becomes complex. Adding to the complexity, does the loose form of organization that the network structure represents, without any long term structure.

This project was led on behalf of Bombardier Transportation in Västerås, Sweden, incollaboration with KTH Stockholm and EPFL Lausanne. This project is connected to thedevelopment of a new and simplified tilt system for rail vehicles.Growing competition from other means of transportation has forced railway companiesthroughout the world to search for increased performances.Travelling time is the mostobvious performance indicator that may be improved by introducing high-speed trains.They require very large curve radii and long transitions curves not to impairridecomfort, another performance indicator. Building new tracks adapted to high speedtrains is very costly and can only be justified where the passenger base is large.Trains with the capability to tilt the carbodies inwards the curve is a more cost efficientalternative. The tilt inwards reduces thelateral force felt by the passengers allowing thetrain to pass curves at enhanced speed with maintained ride comfort but increases thefrequency ofmotion sickness.The benefits of tilting trains are improved speed capability in curves and enhancedpassengers comfort, but at higher buying and maintenance cost. As the conventionaltrains increase their speed in curves, the performance advantage of tilting trains isreduced while their prize is still kept significantly higher and constant.

This report describes a thesis project on 15hp. The purpose of the thesis project is to build a laser projector that reacts on sound waves and thus get a laser beam to draw visualizations of sound waves on a wall. The idea was that the design would be independent and not have to be plugged into any audio equipment. This was achieved by absorbing sound waves into a microphone. Another factor was to get a ?do it yourself? -feeling of the design and therefore it was chosen to be constructed using for example, old hard-drives.The result was a relatively large and bulky designed laser projector that can draw sound waves on a wall..