The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

AbstractThe aim of this thesis is to investigate an experimental work in the region of Kronoberg and to study, from the actors? point of view, what possibilities there are for cooperation when it comes to hastening the introduction for newly arrived immigrants on the labour market, and also what possibilities the cooperation entails for the newly arrived immigrants to integrate on the labour market. The thesis employs the following research questions to answer the purpose:How do the actors in the project work to fasten the introduction to the Swedish labour market?Which opportunities and obstacles do the actors experience for cooperation in the project?Which consequences do the actors experience that cooperation in the project bring for the newly arrived immigrants? opportunity to integrate on the labour market?In order to answer the questions, ten actors involved in the project have been interviewed. Also written documents have been used.The conclusion of the study is that explicit goal and explicit division of the responsibilities in the project have made the cooperation easier.

This master thesis is a part of the DySCAS project at ENEA. The purpose of this thesisproject is to add support for streaming media and USB support to the DySCAS demonstratorplatform.To achieve this, some of the widely used middlewares available today were studied. The onethat proved to be of most interest is CORBA. Although CORBA?s solution to streamingmedia couldn?t be used due to their use of object programming, the CORBA solution didprovide some interesting thoughts regarding how the USB devices should be handled, in thiscase their ?resource inspector? and ?trading service?.Ethernet was the chosen network to support streaming media.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

This paper is a degree project on the C-level, 15 points at University West, Department of Business and IT dept. Informatics. This study is about agile methodology and its impact on IT projects. Requirements management is a process within an IT project, where customer has certain requirements that must be met by an IT system. The difference between the traditional and agile development is in the requirements management process and it can cause problems in a project.

The title: ?Klara färdiga GÅ? can be translated as ?Ready steady GO?, and is ment as a request to start move. In this project I want to invite people to walk more by creating creative, demanding and playful walkways and paths, where the body can be allowed to work just a tiny bit harder.It?s because walking means exercise and fresh air, for free and without spetial equipment. Walking can also be fun, it allows people to stop, change direction and experience things.I think activity should be fun, inspired by children playground my project is a contribution to how adults might stay healthier in a city, where too often healthy activity is solely confined to the gym or sports fields.

The purpose of this project was to investigate whether it was possible to develop a type of application, where users would solve chess problems. The main goal of the project was that there would exist an functional application after the study has ended with which users could solve chess problems on a computer. One subgoal of the project was to create corresponding application for mobile phones. The study was limited to require users to have at least Internet Explorer 9 +. For other browsers, there were no corresponding limitations.

This study is about an ongoing project in the northern parts of Sweden. Quattro Helix is used as a model for the interaction between four institutional members of the society, in purpose of challenging existing social structures and achieveing community development. The aim is to increase the knowledge about Quattro Helix-model as an approaching method to face the problems in the society through cooperation between Civil society, state, academy and industry. Interviews with eight project members were used as the data-collecting method to capture the perceptions about the project constellations. Information was gathered from two representatives from each of the four actors.

My work deals with large scale design of the urban fringe. The thesis is divided in three parts; ?Current viewpoints?, ?Infra City ? conditions ? and ?Infra City ? project?. In the first part, I go through the history of trade shortly. Then I discuss the concept of nature, which ends up in a linkage between natural science and aesthetics in landscape architecture. The link between those two makes a project stronger and more multifunctional. The object of my case, Infra City, is a mall situated north of Stockholm on both sides of the E4 motorway going to Arlanda airport.

SummaryI have a great interest in bouzoukis and since I, during my education in guitar making, mainly have focused on building bouzoukis and other traditional folk instruments, I have chosen the bouzouki as the object of my degree project.In connection to the making of these instruments, I started to consider the construction of the bouzouki and why the bouzouki has such a characteristic sound.One of my theories is based on the fact that most bouzoukis are made with floating bridges instead of glued pinbridges. Do these types of bridges differ from each other tonally and if so, how much and in what way?To receive answers to my questions, I have built two identical bouzoukis with different types of bridges, one with a glued pinbridge and one with a floating bridge. I have been very precise in the making of these instruments, giving them the exact same dimensions and using material from the same piece of wood. This to make sure that the instruments should be as exactly alike as possible.After finishing the making of the bouzoukis, I arranged for a sound test where I let musicians play and listen to the instruments.

certain building or environment can get a protection as a notable building if it contains certainvalues. These values are established by a certain category of people from the cultural sector.These people use established criterions to define the cultural value of the object. The objects canbe evaluated differently depending on who has done the evaluation. The people who protect thecultural environment and choose which buildings that are to be defining as notable buildingsoften uses a special model to characterise the different cultural values. This model is produced bya man called Axel Unnerbäck.

This thesis has been carried out in collaboration with the IT Company MPQ consulting AB in Halmstad. The task we were assigned by MPQ concerned the development of a scooter that can be used year round. We have with the companydeveloped the criteria and requirements for the product in which the goal is toproduce a primary solution that meets the set criteria and fall within the project'sboundaries.The project involves a wide range of different design methods for idea generationand idea development. The project also addresses engineering methods such asprinciple and primary engineering. Occurringmethods in the project include FredyOlsson principle and primary engineering in cooperation with SVID's - Swedishindustrial design process, etc.The final solution will be presented in the form of sketches, CAD models withassociated drawings and a rendering from the program Keyshot..

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

Http : // en.wikipedia.org / wiki / Life is a book with a life of its own. It is made to raise questions about the importance of the book, and the paper book in particular. It is a design project in which a new design method is being tested and evaluated. The intention of the project is to determine whether a concept can be found and evolved from a chosen subject or not. The aim of the book project is also to investigate if the form and content of the book could be entwined, making it impossible to separate them from each other..