In this master's thesis the problem of determining the uncertainty for an estimator of an unknown parameter is considered. The case we study is the estimation of gravity using a reversible pendulum. This involves the estimation of the point where two regression lines intersect. The estimated gravity is a function the coordinates of this point. One way to determine the uncertainty of this estimator is to use bootstrap methods.

This report deals with prefabricated bathrooms and the advantage, during the production process, they have compared to ordinary produced bathrooms.The work is done together with the building company JM. The common task is to investigate if the manufactures, in spite of standardized design can meet the concept of JM, i.e. high flexibility and adjustment towards the customer. In JM they are doubtful to the method, as they did not yet worked with prefabricated modules and think that the choises for the costumer will be limited.There will be a short resume of the progress of the bathrooms and its importance as sanitary and wellbeing.The recent problems with damage caused by damp in bathrooms. Have resultade in regulations.

AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

Life Cycle Cost, often abbreviated as LCC, is a common tool for comparing the total cost of different alternatives, such as heating and cooling methods. Common heating and cooling methods in Sweden are geothermal energy, district heating and district cooling. This report aims to evaluate how different heating and cooling methods differ from each other while being applied on three different types of buildings, using selected LCC-models. Information about the selected LCC-models wasretrieved from each separate model and its website. Reports and agencies were used as sources for information about the heating and cooling methods.

A large part of research about libraries and library buildings in Sweden has been focused on how the building looks not how it functions with the library. The aim with this master?s thesis is to study how a library building is functioning and how its users are experiencing it. This is studied in three libraries, Kungliga tekniska högskolans bibliotek, Sambiblioteket in Härnösand and Vitterhetsakademiens bibliotek. With the questions of how they were planed, what did the libraries want from the new building and which of these demands were realized.

In recent years, agile software development methods have become increasingly popular throughout the world. Today there are a number of different agile methods and they all rest on the Agile Manifesto that was formulated in 2001 as a reaction to the traditional software processes.The aim of this thesis is to make a survey of some of the agile methods used today and to see how they are being used in practice. It consists of two parts: a literature study and an interview study with people working in the software business. First, a definition of agile methods is proposed and a number of different agile methods are described. Second, the interviews are being analysed with special focus on communication, collaboration, expectations and results.

Problem: How do delivery logistics work in practice at the building site? Where are the big problems? How to make building logistics more effective? Do the site management and the haulers agree about questions concerning both parties? What is possible to gain by using better logistics? Is it possible to gain time with better logistics and by that reducing the costs? Purpose and aim: The purpose is to discover if there are any disagreements between the site management and the haulers. If disagreements occur they will be examined and probable measures based on the problems will be suggested. Another intention is to bring key ratios concerning time spent for deliveries forward. One aim is to update a similar report made in 1972.

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

This essay examines the international communitys intervention in Bosnia. The purpuse i to give the reader a deaper understanding of the problems appeared in re-building the bosnianstate. Office of the higher representive (OHR), was to become the koordinator of therecontruction of the institutions and governance. The theory used fore the examination isstate-building, whith an alingnment of state-building trough the international community.The second part of the essay examine the ideas of the High representive (HR) trough threedifferent dimensions. The idea-analysies search to present the core of ideas of OHR, nationalparties and the reconstuction of media.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.

This report presents an investigation and a new design of Habo Ullspinneris old industrial premises. It is based on the owners visions and wishes, two questionnaires and also considering of the historical value.Habo Ullspinneri was founded in 1882 by Frans August Johansson and was moved to the location it has today, near Hökån in Habo, three years later. The electricity that the machines in the industry needed was extracted from the small river that is placed under the building. In 1960 there was a fire and the result became the end of the industrial activity that had taken place in the building.There is no steady activity in the building at the moment. It is nowadays temporarily used as an agriculture museum and as a store room.

The use of CAD, within the building industry came strongly, during the 1980?s and the 1990?s. The development has since then rapidly progressed and the using of 3D-models has in addition increased. We are now at the edge of next step of evolution. BIM, Building Information Model(ing), is here.

A lot of houses built during the Million Homes Programme are in need of major renovation. Today?s technology and materials are better than in the 60?s and 70?s. Both Swedish government and the European Union have set climate goals regarding energy consumption by 2020 and 2050. Achieving these goals would require better standards in buildings than the Building regulations demands, such as Umeå municipality?s construction requirements for new buildings.The report aims to investigate if a renovation of apartment buildings from the Million Homes Programme can reach Umeå municipality?s construction requirements.

This report presents a thesis project at the School of Engineering, Jo?nko?pingUniversity, where the task has been to develop a proposal for a parish communitycentre for the Swedish church?s parish community in Bankeryd.Background1 st of November in 2004 the parish in Bankeryd appointed a special commissionof inquiry called Framtidsgruppen (Future Group), to analyse the parishcommunity?s different activities during the past 5 years and analyse the futureactivities and needs for the upcoming 5-10 years. This analysis would underlie theneeds of building a new centre for the parish community.Implementation, results and conclusionThe main focal points which this report is concentrated on has been to develop abuilding that is well suited for the activities, well adjusted for disabled persons andthe building shall be appealing in an architectural point of view.Based on the information provided from the parish community, studies ofliterature, reference objects and discussions with the contact person at the parishcommunity and the instructor of this project, the programming has beendeveloped. The building?s programming has been the source for the continuedwork with floor plans and the building design..

The Go Down Arts Centre is a proposal for a new building to an existing organisation in Nairobi, Kenya. The proposal relates to the scale of the city by making a statement on a future urban path, and by welcoming the city in to the building. The proposal houses both activities affiliated to Go Down, such as studios and rehersal rooms, as well as opportunities for the visitor to meet and interact with the culture produced at Go Down, both in formal and informal settings. The building is closed to its surroundings, apart from a grand entrance towards the urban path. There, the city passes through the building to an inner courtyard, where the communication to all the rooms and activities takes place.