This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

This final year project is made for Peab Jönköping and its target group is the construction industry. The main focus is the use of unutilized building material in the most economical and environmental-friendly way. Unutilized building material is here defined as material purchased for a construction project that for different reasons not has been used. The most important thing to find out was how much building material considered as being waste is actually useable material, and how much less it costs to use that building material instead of throwing it away.When this information was gathered a proposal on how to efficiently use the unutilized building material instead of wasting it was designed. Costs and incomes were investigated and the proposal suggested a storage area where Peab can store their unused building material.

The purpose of this paper is to examine how the revised Planning and Building Act (SFS 2010:900) have influenced the comprehensive planning in Swedish municipalities. A focus is directed at examining how the new law regulates a greater consideration to climate aspects and the what consequences this results in regarding the implementation of the law in Swedish municipalities comprehensive plans.The paper is a case study, containing both quantitative and qualitative methods. The case study is based on three municipal comprehensive plans. Based on quantitative material three municipalities have been selected to constitute the sample of this study. These municipalities are A?lvsbyn, Sollentuna and Olofstro?m.

The Swedish building stock accounts for nearly 40 percent of the total energyconsumption in the country. Properties built today are likely to last for 100 years orlonger. This places high demands on long-term and smart energy solutions that willkeep the future Swedish building stock energy consumption at low levels. This thesishas focused on examining how the energy performance of buildings is affected bydifferent choices of window types in different cardinal directions. The objective wasto obtain a basis for recommendations on how window properties can be optimizedfor different types of buildings and orientations.

The e-commerce in Sweden has increased each year for the past several years, but still just over half of all the consumers feels worry about payment security. This could be the reason why over half of the consumers just shopped about one time on the Internet during the whole year of 2009. Another reason could be that the many consumers have a lack of trust to the different payment methods that are available during payment on the Internet, because they might don't possess enough knowledge regarding the payment methods and their security. If the consumers were to gain more knowledge about the payment methods and their security, it may lead to that the they would feel more comfortable when shopping online, and do it more frequently. It is this that will be investigated in this paper.The purpose of the paper  is to research if consumers believed knowledge concerning the different payment methods available on the web and their security influence the consumers trust in the payment methods.

An energy calculation model for Swedish houses   that is fast, flexible and user-friendly has been developed within the   framework of this thesis.  The model   also provides a set of actions which may be investigated in the model based   on savings and payback period. Energy use in a house depends on the technical   conditions, such as building envelope and heating systems, which outdoor   climate the house is exposed to and who lives in the house. Energy use for a   house can be divided into heating, hot water and household electricity. There   are several methods to calculate the energy use of a house. This report   summarizes the methods that may be suitable for a fast and user-friendly   calculation model.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

I have researched different methods for practicing with the purpose of learning some useful ways to handle my performance anxiety issues, to better understand the phenomenon, and to be able to perform better under pressure. I chose or created nine methods and used each during a decided period of time, each period ending with a performance. Afterwards I analyzed the methods with the help of audio recordings and written concert evaluations to see if it was possible to alter my practicing techniques to be more directly focused on preparing for the concert situation..

Kandidatprojekt Kontor och Bostäder vid Hornsbruksgatan. Att i en intressant kontext, vid både stad och park skapa en levande miljö där de olika nivåerna nyttjas för att skapa nya stadsmiljöer. Ett blandat program, bestående av bostäder, kontor och kommersiell verksamhet, som normalt är ganska slutet öppnas upp för allmänheten och disponeras i förhållande till grad av offentlighet..

Since a couple of decades the community of Jönköping has worked out an urban vision of how the city should be appropriated expanded. The prospect extends to around year 2040 and deals with the area south of lake Munksjön in Jönköping, Sweden. Today there is a proposal of how this would look like and what main public functions that should be located there. One issue in the so-called urban vision 2.0 indicates a congressional building. This report describes how such an object can be designed according to the urban vision conditions.The work is focused on three main themes;* Architectural concept and a modern form of expression.* A functional attractive congress building in a new planned town centre.* General concept of a realistic structure system that meet the spatial and architectural possibilities.Various concepts in the meeting industry and in the architecture field are identified in order to understand the concepts and ideas with today´s congress buildings.

Is the new technology always the best? This final project tries to determine if BIM is the melody of today, or if traditional 2D drawing is recommended. Perhaps a compromise is necessary, utilizing both methods.In order to answer this question, different views from the industry have been retrieved through reports, producers of software and users. The approach has consisted in building a 3D model of the school Råslättsskolan, house 01, along with interviews with people involved in the building process.When working in 2D it is hard to include the third dimension, mistakes are done and collisions happen that must be corrected, in most cases at the construction site. BIM is an incredible help since the model allows you to detect collisions and correct them.

This essay is an attempt in analysing the establishment of the first Early Middle Ages castles in Scania. There are two types of castles in Scania during the eleventh century, keeps andringworks. This castle was built by three fixed elements of power: the crown, the church and the aristocracy. The result of the survey shows that A majority of the castles during theeleventh century in Scania where initiated by the church.The results also show two building phases of castles under the period. The first building phase begins in middle of the eleventh century and the second building phase begins in theperiod 1180- 1200.

A study has been conducted on how organizations in Sweden administer costs of facilities management services internally. There are three main theoretical methods for administering costs. In the first method, costs are maintained on a central level; in the second method, costs are allocated and in the third method, internal transfer pricing is used. The aim of the study is to identify which methods are applied in practice, to evaluate whether the methods fulfill their intended purposes and to study the relationship between the methods used and the cost level of facilites management services. In practice, a large diversity of methods are used for facilities management costs.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

The author has, with the help of AK Consultancy Indoor Air AB, formed a series of questions regarding moisture problems in buildings and how these are handled in extreme climates with high temperatures and a high relative humidity. Furthermore to analyse and indentify key material that makes a construction safe against moisture problems. Ventilation, AC and the choice of materials have in a later stage of the thesis been investigated to enhance the knowledge of moisture protection. The research for this report includes measurements on existing buildings, calculation models on the building envelope for analyses and the ingoing materials of the envelope. The health aspect of moisture problems related to ?sick building syndrome? has been included and interviews have been conducted to gather relevant information.A study of the American system, ASHRAE, American Society of Heating, Refrigeration and Air Conditioning Engineers and the standards used in Singapore has been made to highlight the difference.