This degree project aims to investigate the potential and possibilities for conceptual energyanalyses in the early stages of the design process. Many key decisions are made in theearly stages of a project regarding the shape and orientation of the building. Conceptualenergy analyses can provide the architects with insight regarding different design option?srelative energy performance.As the demands for more sustainable buildings increases, so does the need for earlyenergy analyses. Performing analyses in the early stage requires many assumptions andguesswork which could lead to a large margin of error.The offering from Autodesk is a module in Revit Architecture/MEP and the stand aloneprogram Project Vasari (under development).

We came in contact with the project "Grönplan Danderyd" that aims to create a green structure plan for a municipality of Stockholm called Danderyds kommun. Our thesis is a part of this project and makes it's contribution through the gathering and systematization of the knowledge of the functions of an urban green structure. It also makes a contribution through suggesting how this knowledge can be applied during the construction of an urban green structure plan. We found that "Stadens parker och natur", published by the Swedish National board of Housing, Building and Planning, was a recurrent source of information in the green structure plans that we studied. We saw a need of complementary additions and updates to the rather old report and found literature that adds the developments of the last decade. First of all we have chosen to make themes based on the functions of a green structure that were presented by 'Stadens parker och natur'. The themes we suggest that a greenplanning document manage are: Recreation, Pedagogies and Heath, Biological Diversity, Green structure in the History of Building Cities, Cultural Identity, the Health of the City, Biological Technology in the Municipality and Use and the Users. We found good examples of how to handle these themes in documents that handle greenstructure planning from the municipalities of Göteborg, Strängnäs, Eskilstuna, Malmö, Lund, Västerås and Uppsala.

It is sixty years since Sweden's first star-shaped housing estate was built in Gröndal, a suburb of Stockholm. Olle Engkvist, the building contractor, was the driving force behind the residential area and it was designed by architects Sven Backström and Leif Reinius. The estate comprises detached star-shaped houses suited to a more hilly terrain and terraced star-shaped houses on the flat land. The eight gardens of the terraced houses form the shape of a hexagon. It is these gardens, designed by Sven Hermelin and Per Friberg, which are the main focus of this thesis. The buildings on the estate have recently been renovated and it is now time for the gardens to be restored.

Our purpose was to examine why and how to start a ?bridge building enterprise? between qualified Chinese human capital and Swedish structure capital. The theoretical framework consists of literature from well renowned authors and is divided into four different parts: Intellectual Capital, Knowledge Management, China & Intercultural understanding. The empirical foundation has been gathered from a great variety of different sources in an attempt to cover the many complex angels in which this subject can be looked upon. Chinese students, managers in international companies with experience from China, Chinese employees in Swedish companies and different people with good knowledge of different areas of China are all among our respondents.In our conclusion we have reached the three following conclusions for why one should start a ?bridge building? enterprise in between qualified Chinese human capital and Swedish structure capital:-To fill future shortage of qualified human capital in Sweden.-To improve communication between Swedish companies and the Chinese market.-To develop qualified Chinese human capital with western standards..

Det primära syftet med detta examensarbete kan sägas vara att skapa en uppfattning hos Skanska Väg & Anläggning Sydost, som är initiativtagare till detta examensarbete, om vad BIM (Building Information Model) är och hur det lättast kan implementeras i deras arbetsprocesser. Det skulle vara omöjligt att täcka in alla aspekter av BIM under den korta tid som funnits till förfogande och inom ramen för detta examensarbete, därför har de aspekter som ansetts vara viktiga för företaget samt författaren lyfts upp för utredning.För att kunna nå dit har examensarbetet till uppgift att kartlägga och synliggöra de skillnader som finns mellan dagens byggprocess och BIM (Building Information Model) och utifrån det föreslå möjliga sätt att implementera denna arbetsmetod hos Skanska Väg & Anläggning Sydost.I examensarbetets första kapitel ges en kort introduktion och bakgrund till hur byggprocessen förändrats under tidens gång. Ett syfte och en frågeställning formuleras och en avgränsning för examensarbetets omfattning görs.I examensarbetets andra kapitel ges den teoretiska bakgrunden till dagens byggprocess. Viktiga aspekter av dagens byggprocess lyfts fram och förklaras. Därefter följer en presentation av begreppet BIM och vad det innebär.

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

This paper describes the integration of environmental assessment in Swedish municipality comprehensive planning through a chosen case study. The implementation of a new EGdirective in Swedish law, concerning Assessment of the effects of certain plans and programmes on the environment, should lead to some changes in the way Swedish municipalities' deals with environmental issues in their comprehensive plans. This could later on lead to new preconditions for municipality comprehensive planning. The purpose of this study was to investigate how the planning organisation in the municipality adapts to new regulations for impact assessment of comprehensive plans required by the Planning and Building act. Secondly the purpose was to partly participate in the early stages of the planning process and thereby indicate and identify possible environmental impacts regarding the aspects of land and water. This was done as a case study in a well defined part of the process.

This paper thoroughly investigates needs and requirements for overhead distribution feeder inspection and develops models to investigate possible relations between short term inspections remarks and outages. The study was conducted in collaboration with Fortum Distribution AB that supplied extensive information about their overhead power feeders concerning both inspection and power outages. The investigated models where lognormal linear model, Poisson generalized linear model and negative binomial generalized linear model. All models were implemented utilizing offset terms to compensate for differences in feeder length and amount of overhead versus underground feeders. The Poisson generalized linear model was rejected at an early stage due to overdispersion and neither of the remaining models fit the data perfectly.

The purpose of this paper is to describe methods to computerize a library and to compare theory with a process in a school library. The case study is based on a school library called Sunnerbogymnasiet which is situated in Ljungby. My questions are;- Which methods are parts of the process to computerize a library?- Which methods are used in the process in Sunnerbogymnasiet?- What does the practical process look like compared to the methods described in theory?In the paper I present the methods in the process according to the studied literature and compare these with a process at Sunnerbogymnasiet. The most significant result is that cooperation between the school library and the community library was the most important reason for the choice of library computer system.

In forestry there are always needs of forest data to make good strategic decisions of different actions and economic winning. Usually this data gets from field-estimations made by forest workers with expensive costs and sometimes unsatisfied quality. StoraEnso Skog is a great forest company in Sweden and they have part of the responsibility of the forest own by Bergvik Skog. Bergvik Skog is owner of 1, 9 million hectares productive forest land. Both Bergvik and StoraEnso have great interest in new inventory techniques to get the important forest data. The company Foran Remote Sensing offers the opportunity with airborne laserscanning of forest and forest land. Foran got the mission of Bergvik and StoraEnso to laser scan Bergviks possession in Älvdalen, Dalarna.

Miljonprogram is a Swedish building program from 1964 to 1975. During that time about a million homes were constructed. Now, almost 50 years later, they are in desperate need of renovation. In order to fulfil the Swedish environmental objective to decrease energy consumption 50 per cent until 2050, considerable housing stock built under the Miljonprogram has to be renovated.Focus in this thesis is on the building services and theirs profitability that can decrease energy consumption in households build during the Miljonprogram. Building construction is not considered in this report.

The main goal of this project was to develop some sort of a diverter for pipestransporting waste in a vacuum system. This unit was supposed to be both cheap andeasy to serve/exchange worn out parts. With a limited space to install the pipeexchanger, the challenge was to keep it as compact as possible without constructingbends with to small radius or to sharp angles as this would wear out the system a lotfaster than planned. The system was also supposed to be able to handle clothes andscrubs from hospitals. Having too much sharp edges or angles would tear the clothesapart.

The purpose of this report is to find a model of statistics for construction and demolition waste, which makes it useful for the local manager at the building site. The intention with the model is that it will be used as a support of the local manager, to direct his project towards reduced strain of the environment. The model will also be used to make it easier to control that the claims from authority and aims for the environment are achieved. To familiarise with the subject waste handling within the building and construction sectorI have done a literature search. I have also been studying rules and regulations regarding the waste handling.

The design of buildings is today considered to be crucial for obtaining sustainable development. Research concerning sustainable building is considered to be a Swedish area of strength and development projects as Hammarby Sjöstad and Bo01 are often pointed out as Swedish prime examples of sustainable building. Some still argue though, that that these projects should not be presented as sustainable, due to its incompetence to meet their objectives. This contradiction has attracted my curiosity. By doing this study I hope to gain understanding about the difficulties Bo01 and Hammarby Sjöstad are surrounded with and its significance for sustainable development.

Building with volume element is relatively new and has started to increase more and more. The regulations that exist to regulate and determine how the transports of volume elements are to be conducted are diffuse and not very well adjusted to address the issues with transporting volume elements. Today there are a number of instances that a company has to turn to in order to get a somewhat different view, what regulations say and interpret it in order to know what applies and not applies regarding the transportation of volume elements. regulations. The rules that are in place make it tough for the volume element producing companies to develop and continue to be active on the market.