During the past years Building information modelling (BIM), which is a digital way to work, has begun to spread amongst the parts of the construction process. At the construction phase the larger companies has started using the new way to work. This expansion has not been developed amongst smaller companies leading to the purpose of this report, to investigate in which ways the smaller companies can implement BIM by changing their way to work. The thesis is delimited to work preperations with the objective to define how the work preperations should be structured to enable the implementation of BIM. To achieve the objective of the report, information about the subject has been collected by interviews and literature studies.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

The purpose of this study is to facilitate sustainable building by the use of BIM. The goal is to determine which aspects of sustainable building, which can be analyzed mainly with BIM tools, but also other aids.The study is based on literature studies and interviews. The literature review examines aspects important for sustainable building by studying environmental certification systems applicable in Sweden, as well as the BIM tools available on the market to analyze these aspects. The literature also includes the concepts of BIM and sustainability in order to provide a clearer view of its meaning. The interviews have brought the study's overall understanding of the industry and guidance on the subject.The results are presented in a table, where the aspects relevant to sustainable building are listed.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

This thesis provides a comparison of the old Planning and Building act (PBA) from 1987 with the new PBA, which entered into force in May 2011. The essay consists of a descriptive part that presents the regulation of both laws. The new PBA consists of several differences compared to previous regulation. This thesis will, however, primarily be centred around the regulation regarding building permit appeals and the possibility of building permit, to gain legal force.In the old PBL, there were no regulations that result in a building permit decision could be made effective. Instead, a building permit could, long after the decision had been made, be over-challenged.

Acquiring a former station building can mean that the property owners must familiarize themselves with a lot of planning and building regulations. After the new Planning and Building Act code into force in 2011, the responsibility lie on the developer to ensure laws and regulations. Based on the regulatory framework that is available occurs sometimes balance issues, between care requirements and building codes. The station building in Ormaryd was acquired in 2009 by two individuals who intended to accommodate office and retail space in the building. In doing so a new local plan of the area was established, including regulations on how the building could be used. By including road safety and noise, the risk was not considered appropriate to use the station building for housing.

The purpose of the study was to investigate the use and losses of energy in an existing older building. Another purpose was also to look through various options for heating systems with renewable energy in the building. The aim was to reduce the use and losses of energy. The first step was to study the related electricity bills of the building and also perform measurements and calculations of the building envelope and ventilation. The next step was to find out the possible actions for energy saving by performing measurements and calculations.

This thesis examines the sheep shed called Ronningsgift, and its historical functions and geographical location. The study aims to make a comprehensive gathering of the existing knowledge and to shed light on new theories about the history of Ronningsgift. This is done through desk research including literature and archive search, as well as an investigation and description of the construction and materials, and an interview. Further, I got the opportunity to take part of the results of two C14 samples from Ronningsgift. The literature and archive search shows that the most common theory of the historical function is as a guest house (g?ststuga/h?gstuga) or more traditionally called, Malst?ue/Malsteuvu.

The study took place at a food corporation in Växjö, Sweden. It describes a building that contains four tanks in which glucose syrup is stored. The purpose of the study was to calculate the amount of heat that leaves the building and the amount of heat that is supplied by the installed heating equipment. Before the calculations could be implemented, all the systems that supply the building with heat had to be examined. With a small amount of information from earlier studies, the work to gather all the data necessary for the calculations began.

Risk management is a key competency that is constantly being researched how it can be improved within project management. The risk management process consists of four major steps: identify risks, assess the risks? significance on the project, evaluate and address the key risks and follow up.The majority of companies seem to neglect certain identified risks, and decide not to mitigate if the risk does not cause adverse effects to the business. To counteract undesirable consequences and help organisations to become more effective at managing risks an initial work has been conducted for a risk repository.The project develops a proposal on the design of a risk repository which aim to effectively support a database implementation. The study includes literature studies which resulted in a relational model for database implementation.

This report presents a thesis project at the School of Engineering, Jo?nko?pingUniversity, where the task has been to develop a proposal for a parish communitycentre for the Swedish church?s parish community in Bankeryd.Background1 st of November in 2004 the parish in Bankeryd appointed a special commissionof inquiry called Framtidsgruppen (Future Group), to analyse the parishcommunity?s different activities during the past 5 years and analyse the futureactivities and needs for the upcoming 5-10 years. This analysis would underlie theneeds of building a new centre for the parish community.Implementation, results and conclusionThe main focal points which this report is concentrated on has been to develop abuilding that is well suited for the activities, well adjusted for disabled persons andthe building shall be appealing in an architectural point of view.Based on the information provided from the parish community, studies ofliterature, reference objects and discussions with the contact person at the parishcommunity and the instructor of this project, the programming has beendeveloped. The building?s programming has been the source for the continuedwork with floor plans and the building design..

Urban building vid HornsbruksgatanProjektet handlar om att aktivera bergsbranten längs Hornsbruksgatan på Södermalm i Stockholm och samtidigt skapa en länk mellan gatan och Högalidsparken utan att isolera dem ytterligare från varandra.Det är ett förslag på en Urban building, en city building, med både privata och publika ytor. Den innehåller bostäder, lokaler för uthyrning till kontor, butiker och restauranger samt uterum och parkeringsplatser.Byggnaden har sin framsida mot gatan och ljus släpps in enbart från ett håll. Projektet är ett försök att skapa kvalitativa bostäder och utrymmen under rådande förutsättningar vad gäller ljus, rymd och avskildhet. .

The purpose of this thesis was to illuminate how festivals are building their brand. We aimed to investigate how festivals build their brand equity and how they use their web site as a brand-building tool. In order to understand the brand-building process within festivals, a case study was conducted based on interviews with three respondents from three different festivals. The study has shown that festivals are aware that the brand constitutes an important competitive advantage. They use both online and offline marketing tools in their brand building process.

AbstractIntense competition in the building industry has forced building companies to develop highly efficient and optimised building solutions. This project, with a loggia that works both as an extended living room and a glazed balcony offers a highly economic viable alternative to standard balconies. This alternative is likely to attract build master since the area of the loggia will be part of the apartment area, i.e. included in the area for rent..