Sweden has formulated ambitious energy goals which signify that by year 2050 the energy usage should be halved. One of the objectives is the reduction of energy usage by 20% by year 2020 and that it should be compared to the usage of energy from 1995. In parallel with increased energy requirements for buildings the demand on housing conservation, by highlighting also buildings from the last 50 years as part of the building heritage, continues to enhance, which in theory means that there is a conflict between these.The law will never be able to point out unique buildings and PBL (planning and building act) is not especially concrete. The National Housing Board has tried to make this more concrete by the new BBR regulations though there are still an enormous variety of interpretations.This report deals with the conflict between conservation requirements and additional insulation of the building envelope and is limited to multi-residential buildings built between the years 1945 and 1975. It is the stock with the greatest energy consumption and that is where the big challenge lies.

Companies acquiring ERP systems are often dissatisfied with the project and therefore consultancy firms wish to make use of project models in order to achieve success in implementations. Since research on ERP implementations in service companies is limited, there is a need for mapping of critical activities in implementation projects in this line of business. Under these premises, the purpose of our master thesis is to develop a model for implementation of ERP systems, specified in activities, which can be used by mid-sized consultancy firms with mid-sized qualified service companies as customers.A literature study including project models, modern models and methodologies for ERP implementation, commonly existent activities, success factors and system development methods was carried out. Starting out with this, a theoretical model for ERP implementation was generated. In excess of this, a case study was conducted, where the implementation of the ERP system Microsoft Dynamics AX at the service company Eurostep, performed by the consultancy firm Medius, was studied.

After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

The reason for performing an Environmental Impact Assessment (EIA) is to incorporate environmental concern in different kinds of plans and projects. The purpose of such an assessment is to identify and describe direct, indirect and cumulative environmental impacts.Geographical Information System (GIS) is a tool that can be used to combine spatial extension of both sensitive areas and different environmental impacts in a quick and easy way. Because of that, descriptions of environmental impacts and motivation of different standpoints on a specific issue can be more correct and easier to make if GIS is used as a tool.Hence, GIS can contribute to improve the quality of Environmental Impact Assessments. If the benefits of using GIS are to out weight the costs, geographical information of satisfactory detail, actuality and accuracy need to be available at reasonable prices.In this paper, case studies are carried out for three different geographical analyses to investigate the use of GIS as a tool in EIA. From these case studies, more general conclusions about the benefits and limitations of using GIS for Environmental Impact Assessments are also drawn.

The river Göta Älv reaches between Vänern and Gothenburg and is the main raw water source for Gothenburg that supplies about 700 000 people with water. To protect and maintain a high water quality, continuously samples and water analyses are made throughout the river. In 1998 a protection area was founded between surte and Lärjeholm where the raw water intake is. This was made to increase the awareness of the importance to protect the water. However, there is a lot of contribution of untreated stormwater to Göta Älv within the protection area.Göteborg Water and Sewage Works commissioned this thesis where two areas, Tagene industrial area and Kärra residential area, with untreated stormwater outlets within the protection area are studied.

This essay examines the using of consensus method for decision making within the World Council of Churches (WCC) and the process that led to the decision to adopt its usage. The main question of my essay is why the method was introduced to the WCC and what motives lay behind its introduction. Other questions are how the consensus method works; both in theory and in practice, and what the predecessors and prototypes for the method are.The consensus method belongs to a broad Christian tradition of spiritual discernment and spiritual decision making. The New Testament, in particular Acts, gives examples of decision making in the early church which show that discerning God's will was considered essential. However the most influential model for the consensus method have been the decision making process of the Religious Society of Friends or Quakers, and also the consensus model of the Uniting Church in Australia.

Since product placement is a relatively new phenomenon in Swedish television, there is a lack of research on what attitudes Swedish TV-viewers hold towards it. This is where our paper will contribute to the research. The purpose of this reserachpaper is to describe and analyze what attitude Swedish TV-viewers has towards product placement. Kim Schröders multidimensional model of mass media reception were used, which is a developed model from Stuart Hall?s ?encoding/decoding? one-dimensional model.

This study began with a mission statement from the firm Tobii Technology AB to identify customer needs in the relatively new and rapidly growing market for eye tracking analysis. After consuling external experts, the authors however found that the availability of previous academic published market studies of new and fast growing markets was poor. Therefore a decision was made to execute the task and at the same time create a methadology for future studies in this area. The identification of customer needs, which formed the basis of the insights and analysis, led to frequent discussions between the authors and the firm's supervisors. This resulted in a project plan and a decision that an iterative model would be used, were earlier decisions would be questioned and refined throughout the project.

Testing has always been an important task in the scope of software quality. Though it has never been as much appreciated within the management of the organisations as the software development has. However testing is becoming more attractive within organisations because it becomes more evident how much money working systems saves in contrast to defect ones. A tester often use testing tools to simplify the work progress. There are a lot of tools nowadays but not many evaluating models which helps the tester to know which one to recommend.

In this study, the pre-tension force in an insert screw connection are examined in order to establish a greater understanding of the system and to facilitate the process of making new metal cutting tools. Certain especially significant design variables such as the offset, the length of the contact thread and the shank length above the threaded hole, are selected to be closely examined. A comparison of the influence on the pre-tension force between threaded holes made with a worn, versus new, threading tool is also involved in the experiment. The study is limited to handling the screw sizes M2,5 and M3,5. The results show that a regression model, with good approximation, can be fitted to the measured values.

Purpose: The purpose of this study is to examine how a company with a single brand is perceived as uniform, as well as how they use internal brand building to reconcile various competing actors within one brand. Furthermore the aim is to examine how staff, through internal brand building processes, perceives and identifies themself with the values of the common brand. Method: A case study with method triangulation was conducted at Nordiska Kompaniet department store in Stockholm. Quantitative data through a questionnaire survey with employees combined with two observations. Qualitative data was given through an email interview with a responsible manager of digital channels and PR from NK AB.Theories: This study has used the following theories; Destination marketing, Corporate brand, internal branding, corporate identity, corporate culture, brand value, service brand values, brand citizenship behaviour.Conclusion: This case study of NK has shown that internal branding building in a department store is a comprehensive work, which all involved must have a unified perception and understanding of the brand, in order to successful unite under one brand.

The name of the study means ?The short arm - a study in diversity and arm?s length in the cultural collaboration model?. Right now there is a reform in the Swedish cultural administration where the responsibility for handing out state funds and grants to cultural organizations is changing from the state government to the local regional governments. The purpose of this study is to map the organisational changes caused by the reform and investigate how this affects the regional policies concerning cultural diversity and the arm?s length principle.

After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

Rapporten avhandlar modelleringen av en befintlig industribyggnad och dess tillvägagångssätt. I rapporten har även utredningar och studier granskats kring neutrala filformat, laserscanning och byggprocessen i allmänhet då dessa omnämnda ämnen går hand i hand och utgör fundamenten i modellerings-projekt. Projektet som författarna modellerade var det befintliga renseriet på Södra Cell i Mönsterås. Intervjuer som kontinuerligt utförts med berörda personer framgår under genomförande delen..

We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.