This study includes several purposes which are to describe the concept of working environment, explain who is responsible for its functioning and how the working environment should look like. Other purposes the study have is to investigate how the working environment is in both Swedish and the two investigated companies construction sites and to share some operators proposing measures for the shortcomings and problems that exist in the construction sector working environment. To achieve these purposes was a qualitative study made with unstructured observations, interviews and survey where three construction sites were observed. The result shows that the concept of the working environment cover many aspects and is essentially about the environment we live in and experience in our work and this environment can be both an indoor as an outdoor environment. In this work, the concept is divided into four areas; it is the physical, the ergonomic, the psychosocial and the chemical.

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

Sweden is dependent on secure sea transport. Shorter disruption of imports of fuel and crude oil can be managed with an emergency stock, but a prolonged halt in imports creates problems. For industry, the vulnerability is greater. Fragmented production chains in combination with expenditure reductions in inventory causes a dependency on proper transport of intermediate goods in the manufacturing industry. A lengthy disruption thus involves disruption of production for both domestic consumption and for export goods containing imported parts.In order to secure shipping routes with a limited number of vessels, Mine Counter Measures (MCM) capacity is required, and according to the Armed Forces, developed with new sensors and autonomous vehicles.

Live exports of animals began during the late 19th century and are nowadays a valuable alternative to the slaughter industry in Australia. About four million sheep and half a million to one million cattle are exported annually from Australia to the Middle East and Southeast Asia. Most of these animals are exported for slaughter, but some cattle are exported with the purpose of breeding. One factor that has been the driving force for the live export industry is that countries through tariffs and other barriers have favored the import of live animals rather than the import of meat.The export means that animals with a great cognitive ability are exposed to a long chain of production from the farm to the market and there are many factors that can affect the welfare of the animals in a negative way. Some of the most serious are high temperatures and a high stocking density, although seasickness, noises and handling can also have a negative impact on the welfare of animals.

During the years of development in the 60s and 70s the need for new housing in Sweden arose. Sweden was going to be the most modern country in the world. This period has later been called ?the time of the big programmes?. One of the parts in this building of a welfare society was a large policy of building politics with few counterparts in history.

This bachelor essay is divided into two parts, the first being a construction of a single-familyhouse and the second an in-depth study of five different isolation materials, analysed from anenergy perspective.The first part, the construction of the single-family house, has been created from knowledgeacquired during three years of studying at KTH Royal institute of Technology in Stockholm, inthe program Architecture and the Built Environment. The constructed house is a one-floorhouse of 137m2with façade plaster, situated in Borlänge, Sweden. The house has a wooden framewhich is built on a on sight cast concrete foundation, on the ground. The house?s roof is a gableroof, which has an angle of 24 degrees.

Problem: The main problem this thesis brings up is what impact factors like trust, commitment, communication between a company and its costumers and value can have on costumer satisfaction on the basis of a relationship perspective.Purpose: The purpose with this thesis is to describe the importance of factors that can have an impact on customer satisfaction on the basis of a relationship perspective. To do this the author has looked into a company called Q-steps and conducted an investigation on their costumers opinion of their relationship with the company.Method: An interview was held with Q-steps CEO Sören Levén as the basis of the thesis, as well as a questionnaire that was sent to the company?s existing costumers over the web.Theory: In the thesis the author uses a model that describes factors that can have an impact on costumer satisfaction on the basis of a relationship perspective. This model is based on theories within relationship building in service companies.Conclusion: To be able to develop good relationships to their customers and as a result of this increase the level of costumer satisfaction, Q-steps has to take different variables into consideration. The main focus in this matter should lay on the variables that to a great extent affect the level of costumer satisfaction.

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

Since 2007, I´ve been working in the steel industry in a place called ?SSAB?. That?s why itseemed right to contact them for this thesis.The SSAB concern is global, but SSAB Sweden involves raw steel producing in Luleå, heavyplate producing in Oxelösund, and sheet metal producing in Borlänge..

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

Sweden is dependent on secure sea transport. Shorter disruption of imports of fuel and crude oil can be managed with an emergency stock, but a prolonged halt in imports creates problems. For industry, the vulnerability is greater. Fragmented production chains in combination with expenditure reductions in inventory causes a dependency on proper transport of intermediate goods in the manufacturing industry. A lengthy disruption thus involves disruption of production for both domestic consumption and for export goods containing imported parts.In order to secure shipping routes with a limited number of vessels, Mine Counter Measures (MCM) capacity is required, and according to the Armed Forces, developed with new sensors and autonomous vehicles.

Purpose: To explore the purchasing function, mainly the supplier selection activities, in the fast fashion apparel industry. The purpose is 1) to explore the criteria associated with supplier selection for fashion products, and 2) to analyze the purchasing activities in order to find characteristics and trends which are considered to be strategic for the buying company. Method: The empirics consist of qualitative interviews with employees with responsibility for the companies' purchasing activities, as well as information gathered from articles, annual reports, and company websites. Result: The study indicates that qualitative criterias have increased in importance, and have become an important part of supplier selection for fashion goods. A number of characteristics where identified as important for purchasing fashion goods, which can affect choice of supplier; examples are increased collaboration, increased re-buys and increased use of logistics services.

Purpose: The purpose of this study has been to identify different actors and processes in music recording. We find this interesting since there have been a lot of changes in the music industry over the last years. Our ambition has been to point out different actors and their roles during the advent of recorded music, and identify different features and processes in the creation of music today and in the future. To fulfill our purpose we have had the following research question: What characterize, in a future perspective, the gathered process during the creation of recorded music from idea to delivery and experience?Method: We have used a qualitative approach for this study and we have conducted seven interviews with persons from different areas of the Music Industry and radio.

Syftet med rapporten är att skapa en förståelse om vad BIM är och undersöka vad BIM för med sig i projekteringen. Det som kommer behandlas är BIM-samordnarens uppgifter, de olika negativa aspekter som påträffats vid användandet av BIM samt en presentation av olika program så kallade verktyg som används vid BIM-projektering. .

Computer programs must give a technical effect that goes beyond"normal physical interaction"to be considered to belong to a technical field. The invention shall be be susceptible of industrial application, which means that it should be possible to reproduce or use in any other industrial way. The reqirement that the invention shall be new means that the technique must not be previously known because of patents, published articles, etc. That an invention shall be a contribution to the state of the art in a technical field means that the invention shall not be obvious to invent for a person skilled in the art. Patents do effect the innovation among the inventers, but in most industries most inventions would be invented independent if there was a patent system or not.