The aim of this bachelor thesis has been to investigate some of the materials present in and onprinted papers which might be suitable for analysis. A brief history of paper making and somepigments were studied after which the theory of some of the available methods for technicalanalysis were summarized. Two works of art on paper were chosen for a closer examination,both are woodblock prints but of different composition and origin. The investigation wasmade to exemplify some of the common techniques applied on works of art. There were twoaims in these examinations.

During the last decades the Swedish local party systems have gone through some considerable changes. The number of parties present in local party systems have increased and in some cases even doubled. This makes coalition building between parties complex and parties will be forced to rethink their coalition strategies and adjust to the new circumstances. Theoretically, coalition building has often been considered and applied to national data and there have been just a few attempts to develop and theoretically explain coalitions on a local level. Thus the aim of this paper is to use different theoretical approaches to local data to test the significance of traditional coalition theories.

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

The main purpose of the examination research project is to analyze and describe how democracy and globalization is understood when they are integrated in the developing country of Kenya. This has been reflected by interviewing Kenyan teachers in history and government, to receive their view on globalization and its affects on democracy. Another purpose is to discuss this in didactic terms as a way to see how it can be practically used for upper-secondary schoolteachers in the subjects of civics and social studies. The procedure of the project and the method of use are interviews that have been analyzed in all with theoretical perspectives. My queries to be answered for the research are:1.

AbstractBuilding Information Model/Modeling/Management (BIM) is a tool that allows for efficient working methods. BIM saves time and money while providing the potential for visualization. This method of working is based on a 3D-model, and then a fourth and fifth dimension are connected. 5D modeling means that a spreadsheet creates cost estimates based on the 3D model. This provides opportunities to carry out calculations in the early stages of the projects. Calculations are currently performed manually and do not contribute to the development that the construction industry requires.

Abstract This examination work is about the role of physical activity for students with concentration difficulties. The purpose of this work is to describe educators experiences of how students with concentration difficulties are affected by physical and motor activity during school-time in primary school. In the work I assume from my questions that are: How do educators experience students with concentrations difficulties? Do educators think physical and motor training during school-time matter for the students learning processes? How? Do students with concentration difficulties have other possibilities than other students regarding physical and motor activity during school-time? I am using a qualitative interview method for answering my questions. The interviews are conducted in collaboration with three educators in a medium-sized Swedish F-6 school.

AbstractThe real estate sector is today responsible for 40 per cent of the total amount of energy consumption within the members of the EU. All over the world there are collaborations within research and projects to find ways of reducing the amount of energy consumed by the real estate sector. In Sweden, a directive from the European Union has posed demands on authorities as well as on the private sector to reduce the amount of energy consumed by new building constructions. Together with the directive from the EU there are also new requirements and demands from Boverket for the real estate sector.  These requirements mostly concern the energy consumption of kilowatt-hour per square metre and that the consumed energy also should be renewable.  The aim of this study is to explain what kind of value municipalities experience in using certifications and environmental investments for new and existing buildings. Within the chapter theory, essential areas are described such as; environmental certification systems, economical viability, proceeds connected to building green, difficulties with building green, the performance of green buildings when affected by the behaviour of tenants and customer value.  The following chapter describes the methodology with which we have conducted this study.

All new households were to be constructed with "near zero energy house standards" (NZE-house) by the year of 2020. The ambition to construct energy-efficient buildings had to increase rapidly in the spring of 2013.The purpose of this report was to increase the interest for building contractors to construct apartment buildings with passive house standards. By locating and evaluating experiences from an existing passive house a case study including interviews, field visits and document analysis was made. Research of literature regarding other passive houses in Sweden also helped to answer the following questions:- What positive and negative experiences have the study of the passive house meant to the involved stakeholders and residents?- What improvements can be made based on identified experiences?- How can an apartment building be designed as a passive house based on possible improvements?By collecting good and bad experiences, as well as improvements and potential design proposals, a diagram was created designed as a tool for developers when constructing apartment buildings with passive house standards.

This examination paper is about educational drama and is implemented from a participant oriented perspective. The main purpose of this study is to find out what conceptions and experiences the children actualize when participating in educational drama exercises. The reason why I choose to write about this subject was because of my own fascination and experiences of participating in drama exercises. On account of my further profession as a teacher, I want this study to take direction in school.The theoretical frame in this examination consists of literature that describes educational drama as a subject. I also present and discuss some earlier research in this area.

This master?s thesis aims at examining and structuring different viewpoints concerning the assignments of the Swedish public library system. The method used is ideology analysis.The main questions are: what are the overriding goals connected to each of the different assignments? How are these goals motivated? By which means are the goals to be reached? And how does our analysis relate to earlier research on the assignments of the Swedish public library? The thesis can be said to consist of three main parts. Part one is a theoretical framework introducing the concept ?ideology analysis? and the concept ?schools of thought?.

In this thesis proposals for different designs of a borehole thermal energy storage (BTES) have been developed for the building DN-huset in Stockholm, Sweden. To build a BTES results in savings in energy costs by approximately 44 %, i.e. 2 million Swedish crowns annually. Furthermore, a BTES would reduce the annual environmental impact with roughly 75-157 tonnes of CO2 equivalents per year, depending on how the electricity consumption?s environmental impact is estimated.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

The interest in building low energy houses has increased along with the rising engagement inthe climate questions. With the advancing energy prices it is highly suitably for those whobuild and administer their buildings in long-term to build energy-saving houses. 40 % ofSweden?s total energy consumption constitutes of the energy in residences, therefore it iscrucial to take advantage of all the free energy as we possibly can. With crucial questions likequality of living and profit low energy building is a subject that concerns us all.Three proposals for apartment blocks are presented in this work on a real estate in Stockholm.Each proposal is developed through unique processes of design with the purpose to displaypossibilities to deal with the energy requirements of today and tomorrow through energybased architecture.The first proposal is an apartment block based on a traditional design process, the demands ofthe property owner and it?s affected by opinions from architects.

The aim of this essay is to examine three separate Swedish public libraries and their respective websites on the grounds of the usability sciences. I firstly had to summarize the main properties of the usability-field in order to gain an extended knowledge of its purposes and possible usage for today?s library systems. I was then able to apply the extended knowledge in the examination of the three library websites and the purpose of determining whether or not they were designed according to the standards set by the usability-sciences.Usability is a rather new science that deals with the dissection and examination of computer-based systems, in order to find the key components that make systems user-friendlier. With user needs being the main focus of its research, usability tries to meet all the different needs of the modern user and construct systems that are less system-centered and more user-centered.

At Volvo Cars Torslanda's paint shop there is a requirement to in a fast and effective way get an overview of the plants capacity. Therefore a capacity template was constructed as a tool for the engineers at Volvo several years ago. This template has during the years become complicated and outdated. Thus this thesis work will resort as a new capacity template, built from scratch. The new template has been built up based on requirements from Volvo and the concept of OEE (Overall Equipment Effectiveness).