This thesis deals with a Swedish shopping centre, NOVA, from a phenomenological point of view. Starting in my own experience of the architecture I discuss issues such as gender, consumerism and the image of the ideal society, the Heterotopia, as they appear to me in my studies of the building.Divided into three different themes I then discuss the aspects I?ve found through my meeting with the architecture in comparison to a number of texts on the subject.My phenomenological analysis, combined with earlier research, presents to me a number of aspects more evident than others, as I do my own interpretation of the building and its architecture..

Moisture damage in kitchens is an area that many people believe to be irrelevant andnot a subject to concern, however the problems encountered might be larger thananticipated.The purpose of this essay is to get a view of how problematic moisture damagecurrently is as well as what can be done to prevent damage during the constructionand building of new housing.Statistics regarding moisture damage as well as several tools for damage preventionhave been studied and investigated. Industrial regulations have been reviewed tounderstand the requirements construction companies must legally follow during theconstruction and building of new kitchens. Home manufacturers and largerentrepreneurs have been contacted in order to get their point of view regarding theproblems with moisture damages in kitchens.The knowledge of moisture safe constructions is prevalent by home manufacturers,insurance companies and entrepreneurs. Despite this knowledge, the constructioncompanies predominately follow the industries regulations, which normally onlyimplement the minimum requirements.In order to get construction companies to design and build kitchens with increasedmoisture security, stricter industrial regulations might be needed to be implemented.Unlike bathrooms and laundry rooms, kitchens are not defined as a ?wet room? andthe regulations for the construction of kitchens are more lenient.It is difficult to detect water leaks in an early state and the moisture damage is usuallyextensive before it is discovered and repaired if the kitchen lacks moisture securedconstruction and water security.

By studying literature concerning design, didactics and reflection, and complementing those explorations with interviews with experienced design educators, this thesis challenges the idea of aesthetic media education being purely aesthetic in its characteristics. Drawing from their own experiences as a media aesthetics educator and an industrial designer, the two authors argue that the work flow used within most fields of design, commonly known as the design process, might provide a suitable didactic alternative to a field of education lacking relevant methodology. The literature study offers a better understanding of the design process and how it may be defined and viewed within an educational context. The interviews provide a more practical insight into the world of design education. The result shows that the design process as a didactical method theoretically offers both elements of critical thinking as well as direction and frames for students lacking aesthetic and artistic experience.

This report describes the initial work intended for updating the car sharing service Roadmate. Roadmate is one of the services received by the car rental company Hertz First Rent a Car. The goal was to present the client with design- and structure proposals for a car sharing service that includes high usability and at the same time remains aesthetically pleasing.The work is based on an initial study with data collection, mapping the target user group and its needs. Subsequent structural and design proposals for Roadmates company carpooling service are based on the facts surrounding the target group's needs. The result are well developed and tested design sketches with accompanying visual identity and sitemaps that can be the basis for the further work on the development of the service..

This paper describes the process of producing avatars for Jiddr. Today, social media surrounds the lives of youth, and communication via the Internet is an everyday occurrence for most people. Jiddr is an app that was created to give youths a platform for engaging with adults and other youths. It is a moderated forum which gives young people the opportunity to come i contact with adult role models who are knowledgable within various subject areas. On Jiddr, users are anonymous, and this is something I have placed much importance on during the design process.

The purpose with this essay is to study how a micro enterprise builds a brand. This because the current situation makes it difficult to stand out from the vast amount of marketing messages available in the market without having an extensive marketing campaign. Small companies do not have the opportunity to put a lot of recourses as money into marketing as the large companies do. Neither do they afford to repair a brand failure.Brand building is a process that constantly is in progress in a company, large or small. To make this process concrete we have chosen to study the four factors; brand awareness, perceived quality, brand associations and brand loyalty.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

This thesis investigates three different surface modifications, and the route to design and synthesize them. The thesis is therefore divided into three sub- projects. (i.) Design and synthesis of a peptide which secondary structure could be controlled by a negatively charged surface. (ii.) Design and synthesis of a cyclic peptide, that would self-organize prior to surface interaction, using the type I anti-freeze protein of a winter flounder as template. (iii.) The use of solid-phase synthesis to make the synthesis of SAM-molecules easier..

Design har en otrolig förmåga att föra utvecklingen framåt men det finns många som är kritiska till hur design utvecklas i västvärldens samhälle. Syftet med denna uppsats är att analysera open design för att ge ett alternativt perspektiv på industridesign. Open design handlar om en designprocess där vem som helst kan delta, utveckla och tillverka produkter. Metoden har sin grund i open source-rörelsen som hastigt spreds i och med internets utbredning. Open design är dock inte lika välutvecklat då rådande marknads- och företagssystem till viss del hämmar detta.

ABORT ?n GO is a design project within the crossing boundaries of Critical Design and IndustrialDesign.The contemporary discourse on abortion is problematic, and infected by double norms. Thesenorms may cause feelings of guilt and shame in women who have an abortion. The abortion rightis built upon conflicting standpoints; one is that women have right to have an abortion, withoutbeing questioned. Second is the notion that abortion is something that should be avoided, implyingthat you?ve done something wrong if you have had an abortion.With this project and physical product I want to explore and discuss the contemporary discourseon abortion in Sweden.

The passive house concept has been known for many years, but it is not yet verywell known in Sweden. The increased energy requirements places greaterdemands on our buildings and to meet these requirements, passive houses is agood option.Svenska Bostäder have built passive houses with good results and intend tocontinue design some of their new buildings as passive houses. This study ismeant to support Svenska Bostäder in their planning of new buildings byanalyze and compare the different frameworks and building shells of passivehouses.In the first chapters (1,2 and 3) we presents the conditions for passive housesand the differing objects we have examined more generally for the reader tobecome familiar with the concept and the objects.The subsequent chapter presents an analysis of each object partial based on thespecifications from FEBY and finally, in Chapter 5, you will find a table ofvalues where the objects are put into relation to each other and valued there by,together with a brief explanation for the table.This chapter also contains texts on the environment, design and futuredevelopment which all includes our own thoughts and reflections.Finally, the gist of the whole work and our conclusion is presented anddiscussed.On the whole, the work has been very enlightening for us and we hope that theconcept of passive houses have a wider impact in the future..

In this bachelor thesis we have studied how interaction designers describe their profession. The research material is based on nine interviews with interaction designers. Questions cover areas such as interaction design tasks, what abilities they consider important, how they describe their relationship to the users, and cooperation with colleagues. We have analyzed the results using key terms such as habitus, field, and capital, as described by sociologist Pierre Bourdieu. The interviewees express humanistic views, and ask for more cooperation between interaction designers, as well as other people within the field of IT production.

Abstract In my work, I have tried to define and clarify the conception of sustainability seen from my perspective as a landscape architect. With a basis in literature studies, I have analysed and commented on different applications, contents and meanings of sustainability and endurance. This compilation is based on how a number of writers, researchers and authorities consider the importance of integrating ecological, social and economic aspects of sustainability in city planning. My perspective has mainly been founded on the anthologies and compilations from the 80´s and 90´s where Per G. Berg and Björn Malbert acted as editors.

This thesis project is a vision of an identity building in Gothenburg, situated on the pier called Bananpiren. The purpose of the project is to create interest and stimulate discussions around the place and the building.In order to gain inspiration of what such a place can contain and express, a number of similar projects have been analysed, for example the Sydney Opera and the Yokohama International Port Terminal.A number of suggestions was then created and analysed, all of which are presented in chronological order in order to show the rejections and the developed designs that resulted in the final formation to proceed with.The result was finalised in a number of presentation images of the project that can be used by Cullbergs Arkitektkontor AB when presenting the project..