Akademiska Hus owns and manages the university facilities in most university towns in Sweden. Bilbergska house in Örebro was built in 2008 by Akademiska Hus, and designed by White Architects. Today's buildings must meet accessibility requirements determined by Swedish Board of Housing, and it is the developer who must ensure that they are fulfilled. Swedish Board of Housing requirements are often vaguely written and interpretation space is large.This report aims to investigate how much of the requirements which are set towards the University and landlord Akademiska Hus are being achieved. This is done by studying the requirements that are set.

When constructing an industrial- or hall building, the most common framework materials thatis used are wood, steel or concrete. Due to an assignment from Byggnadstekniska Byrån ABhas a document been created that makes it possible to investigate how the final costs is af-fected by gapes in between elements and which used foundation. And this with steel as thematerial. The purpose with this essay is to investigate which is the most well fitted materialwhen constructing an industrial- or hall building wood, steel or concrete. Information aboutthe different materials has been collected by litterateurs and by different internet pages.

Partnering is a collaboration method where the contractor and the client work together, based on a mutual trust towards each other and with a common goal for the project. The method originates from the United States where it was early adapted by the U.S. Army Corps of Engineers. It later spread internationally where the United Kingdom and Denmark were early in Europe to see the potential with partnering, to help aid with the issues they were having where construction projects kept running late, going over budget and lacked in quality. By using partnering you can achieve a shorter building time, improved work relationships and enhanced efficiency and cost effectiveness.

Det har blivit allt dyrare att bygga i Sverige, den svenska byggnadsindustrin har halkat efter övrig producerande industri och byggföretagen måste börja tänka i nya banor om de ska klara de nya utmaningarna. Lean-tänkande har länge nyttjats inom den tillverkande industrin och byggföretag har på senare år börjat snegla på dessa koncept i syfte att öka sin produktivitet. Problemet är att byggindustrin inte har homogena produktionsmiljöer och därmed inte kan använda samma lean-koncept som exempelvis bilindustrin. Därför har ett nytt koncept som kallas Lean construction utvecklats som bygger på ett antal principer från traditionella produktionssynsätt (Koskela, 2000). Konceptet är relativt nytt och forskningen inom området har främst fokuserat på lösningar på specifika problem istället för att skapa förståelse för konceptets helhet.

This essay deals with ruins from the perspective of their cultural values ??and the impact of add-ons, protective add-ons and caring actions affect these values. The issues in the essay are; What are the cultural values of a ruin?  How have ruins been used?  How are ruins treated today?Initially the definition of the concept ?ruin? is discussed, what is a ruin? A building has an architectural biography: the creation, destruction, change and the decay. The concept of ruin is considered to be a state of this decay, rather than a dead building.

This study investigates the planning process of a university library building. The study s major concern is the cooperation of the main participants in this process: librarians, architects and representatives of university colleges and universities. First the authors present the readers with an overview of the litterature concerning this subject. Then follows a presentation of the three case studies. The authors have interviewed representatives of the three different occupational groups at three different library-building projects: Malmö University, Halmstad University College and the department of social- and behavioural studies at Lund University.

Lättelement located in Örnskoldsvik AB is one of Sweden's leading companies in the development of building elements in the form of roofs, walls and floors made ??out of light beams. The company has clients from Lund to Kiruna, and from Norway. This means that the elements have high standards when they have to take many different loads from wind and snow due to such wide geographic variation.The roof elements are structured so that the main body is made of light beams with an I?profile.

This master thesis starts in a wondering about the visions and ideas we have about thecity and about the urban. In Swedish about the term stadsmässighet, which can be translatedin to city-like, urban or urbanely, something that describes or contains features ofthe city. How do we use the city as a role model? Is urbane building the same as buildinga city? Is it about architecture and aesthetics or is building urbanely the way to makepopular cities? The central aim of this essay is to study visions and reality around urbanebuilding in order to understand the concept?s meaning and how it changes. My ambitionis that the essay will function as a discussion basis for students and planners.The work starts with literature studies where theoretical definitions and concepts aboutcities and about the urbane is investigated.

During the last decades the Swedish local party systems have gone through some considerable changes. The number of parties present in local party systems have increased and in some cases even doubled. This makes coalition building between parties complex and parties will be forced to rethink their coalition strategies and adjust to the new circumstances. Theoretically, coalition building has often been considered and applied to national data and there have been just a few attempts to develop and theoretically explain coalitions on a local level. Thus the aim of this paper is to use different theoretical approaches to local data to test the significance of traditional coalition theories.

To build high-rise buildings made of timber has for long been limited by national laws, due to the lack of knowledge in engineering solutions. Frame structures made of wood has for a long time been associated with major fire hazards and consequently lower safety and this connection is still being made today. The increased environmental awareness in recent years has contributed to the exploitation of indigenous building materials, including wood from our own Swedish forests and has become increasingly common. Increased knowledge about how structures behave in fire and how they can be protected in order to achieve safe timber structures has resulted in a growing interest in these structures in the construction industry. Research in the area is constantly updated and new laws allow any number of storeys in wooden buildings in Sweden as long as the performance requirements are fulfilled.The main part of this work has involved calculations of the fire resistance and load bearing capacity of floor and wall constructions.

The incineration of waste is steadily increasing in Sweden and so is the production ofashes. The bottom ash has for many years been used as construction material inlandfills. Now many of the nation's landfills are closed and there is a great need to findanother beneficial use for the ash. Bottom ash is a gravel-like material and with itsmaterial properties it can replace natural gravel in parts of roads and surfaceconstructions. Today this use is only approved within landfill areas where leachate iscollected and checked.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

Climate and environmental issues is now high on the agenda. We live in a generation that must try to solve some major environmental problems. Buildings and habitations account for approximately 40 % of Sweden's total energy today. To reduce this figure, as needed, more research in the field of energy efficiency is required.This thesis concerns the heating of buildings. The load on district heating is heavy during certain times of the day.

Bakgrunden till detta examensarbete är byggföretagens utmaningar med att bedriva byggprojekt där nya och unika objekt skall konstrueras, med många nya förutsättningar och allt som oftast även en ny sammansättning av personalstyrkan. Ett gemensamt behov för dessa byggprojekt är att effektivt kunna hantera en mängd av olika och nya variationer.Oden anläggningsentreprenad AB presenterade ett problem gällande oönskade variationer av produktionstider för betongmonoliter som innefattar mycket repetitiva arbetsmoment. Examensarbetets syfte blev att besvara följande frågor:Vilka är faktorerna som påverkar variationer i produktionstiden vid bygget av betongmonoliter?Vilka är lösningarna till att reducera faktorerna som negativt påverkar produktionstiden?Hur ska de nya lösningarna implementeras?I examensarbetet har teorier kring lean production, lean construction, organisationsförändring och betongkonstruktioner undersökts. Det empiriska materialet har hämtats genom att författaren deltagit i produktionen och fört en fältdagbok över dagliga problem som produktionspersonal påtalat.

Uppsatsen innefattar en intern benchmarking för Volvo Construction Equipment, Arvika, Hallsberg, Eskilstuna och Braås. En kartläggning utifrån intervjuer ska göras över de investeringskalkyleringsmetoder som används i dagsläget. Syftet är att arbeta fram en mall för investeringar inom Operations Sweden, där samtliga involverade använder samma beräkningsmetoder och parametrar i sina bedömningar.Volvo Construction Equipment tillverkar anläggningsmaskiner. De fyra fabrikerna bildar tillsammans gemenskapen Operations Sweden. Inom Operations Sweden tas beslut om ett investeringsprojekt ska genomföras eller ej.